| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Keycloak. When an Active Directory user resets their password, the system updates it without performing an LDAP bind to validate the new credentials against AD. This vulnerability allows users whose AD accounts are expired or disabled to regain access in Keycloak, bypassing AD restrictions. The issue enables authentication bypass and could allow unauthorized access under certain conditions. |
| Improper Authentication vulnerability in Play.Ht allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Play.Ht: from n/a through 3.6.4. |
| Minion event bus authorization bypass. An attacker with access to a minion key can craft a message which may be able to execute a job on other minions (>= 3007.0). |
| An attacker can bypass authorization checks and force a Step CA ACME or SCEP provisioner to create certificates without completing certain protocol authorization checks. |
| A flaw was found in Keycloak, where it does not correctly validate its client step-up authentication in org.keycloak.authentication. This flaw allows a remote user authenticated with a password to register a false second authentication factor along with an existing one and bypass authentication. |
| An issue was discovered on HMS Anybus X-Gateway AB7832-F firmware version 3. The HICP protocol allows unauthenticated changes to a device's network configurations. |
| A vulnerability was identified in the NVDA Remote (version 2.6.4) and Tele NVDA Remote (version 2025.3.3) remote connection add-ons, which allows an attacker to obtain total control of the remote system by guessing a weak password. The problem occurs because these add-ons accept any password entered by the user and do not have an additional authentication or computer verification mechanism. Tests indicate that more than 1,000 systems use easy-to-guess passwords, many with less than 4 to 6 characters, including common sequences. This allows brute force attacks or trial-and-error attempts by malicious invaders. The vulnerability can be exploited by a remote attacker who knows or can guess the password used in the connection. As a result, the attacker gains complete access to the affected system and can execute commands, modify files, and compromise user security. |
| Paperless-ngx is a document management system that transforms physical documents into a searchable online archive. Starting in version 2.5.0 and prior to version 2.8.6, remote user authentication allows API access even if API access is explicitly disabled. Version 2.8.6 contains a patchc for the issue. |
| In versions of Akana in versions prior to and including 2022.1.3 validation is broken when using the SAML Single Sign-On (SSO) functionality. |
| fprintd through 1.94.3 lacks a security attention mechanism, and thus unexpected actions might be authorized by "auth sufficient pam_fprintd.so" for Sudo. NOTE: the supplier disputes this because they believe issue resolution would involve modifying the PAM configuration to restrict pam_fprintd.so to front-ends that implement a proper attention mechanism, not modifying pam_fprintd.so or fprintd. |
| Spring Cloud Config Server may not use Vault token sent by clients using a X-CONFIG-TOKEN header when making requests to Vault.
Your application may be affected by this if the following are true:
* You have Spring Vault on the classpath of your Spring Cloud Config Server and
* You are using the X-CONFIG-TOKEN header to send a Vault token to the Spring Cloud Config Server for the Config Server to use when making requests to Vault and
* You are using the default Spring Vault SessionManager implementation LifecycleAwareSessionManager or a SessionManager implementation that persists the Vault token such as SimpleSessionManager.
In this case the SessionManager persists the first token it retrieves and will continue to use that token even if client requests to the Spring Cloud Config Server include a X-CONFIG-TOKEN header with a different value.
Affected Spring Products and Versions
Spring Cloud Config:
* 2.2.1.RELEASE - 4.2.1
Mitigation
Users of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability4.2.x4.2.2OSS4.1.x4.1.6OSS4.0.x4.0.10Commercial3.1.x3.1.10Commercial3.0.x4.1.6OSS2.2.x4.1.6OSS
NOTE: Spring Cloud Config 3.0.x and 2.2.x are no longer under open source or commercial support. Users of these versions are encouraged to upgrade to a supported version.
No other mitigation steps are necessary. |
| A flaw has been found in Magnetism Studios Endurance up to 3.3.0 on macOS. This affects the function loadModuleNamed:WithReply of the file /Applications/Endurance.app/Contents/Library/LaunchServices/com.MagnetismStudios.endurance.helper of the component NSXPC Interface. Executing manipulation can lead to missing authentication. The attack needs to be launched locally. The exploit has been published and may be used. |
| The OAuth Single Sign On – SSO (OAuth Client) plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 6.26.3. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username and the user does not have an already-existing account for the service returning the token. |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau versions 0.9.0 through 0.9.14 and 1.00-alpha are vulnerable to a privilege escalation issue when Entra ID group-based access restrictions are configured using group display names instead of object IDs. Starting in version 0.9.0, Himmelblau introduced support for specifying group names in the `pam_allow_groups` configuration option. However, Microsoft Entra ID permits the creation of multiple groups with the same `displayName` via the Microsoft Graph API—even by non-admin users, depending on tenant settings. As a result, a user could create a personal group with the same name as a legitimate access group (e.g., `"Allow-Linux-Login"`), add themselves to it, and be granted authentication or `sudo` rights by Himmelblau. Because affected Himmelblau versions compare group names by either `displayName` or by the immutable `objectId`, this allows bypassing access control mechanisms intended to restrict login to members of official, centrally-managed groups. This issue is fixed in Himmelblau version **0.9.15** and later. In these versions, group name matching in `pam_allow_groups` has been deprecated and removed, and only group `objectId`s (GUIDs) may be specified for secure group-based filtering. To mitigate the issue without upgrading, replace all entries in `pam_allow_groups` with the objectId of the target Entra ID group(s) and/or audit your tenant for groups with duplicate display names using the Microsoft Graph API. |
| The Construction Light WordPress theme before 1.6.8 does not have authorisation and CSRF when activating via an AJAX action, allowing any authenticated users, such as subscriber to activate arbitrary . |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.
Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.
This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.
The issue affects versions up to and including 5.8.2. |
| The Biagiotti Membership plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.0.2. This is due to the plugin not properly verifying a user's identity prior to authenticating them. This makes it possible for unauthenticated attackers to log in as other users, such as administrators, granted they have access to an email. |
| SPID.AspNetCore.Authentication is an AspNetCore Remote Authenticator for SPID. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The validation logic of the signature is central as it ensures that you cannot create a SAML response with arbitrary assertions and then impersonate other users. There is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This vulnerability has been addressed in version 3.4.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| zhisheng17 blog 3.0.1-SNAPSHOT has an authentication bypass vulnerability. An attacker can exploit this vulnerability to access API without any token. |
