| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stored Cross Site Scripting vulnerability in the "related recommendations" feature in Ppress v.0.0.9 allows a remote attacker to execute arbitrary code via a crafted script to the article.title, article.category, and article.tags parameters. |
| authentik is an open-source identity provider. Redirect URIs in the OAuth2 provider in authentik are checked by RegEx comparison.
When no Redirect URIs are configured in a provider, authentik will automatically use the first redirect_uri value received as an allowed redirect URI, without escaping characters that have a special meaning in RegEx. Similarly, the documentation did not take this into consideration either. Given a provider with the Redirect URIs set to https://foo.example.com, an attacker can register a domain fooaexample.com, and it will correctly pass validation. authentik 2024.8.5 and 2024.10.3 fix this issue. As a workaround, When configuring OAuth2 providers, make sure to escape any wildcard characters that are not intended to function as a wildcard, for example replace `.` with `\.`. |
| Sysax Multi Server 6.99 is vulnerable to a denial of service (DoS) condition when processing specially crafted SSH packets. |
| NVIDIA Nemo Framework contains a vulnerability where a user could cause a relative path traversal issue by arbitrary file write. A successful exploit of this vulnerability may lead to code execution and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Restore allocated resources on failed copyout
Fix a resource leak if an error occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switch
The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.
Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c. |
| Austrian Archaeological Institute (AI) OpenAtlas v8.11.0 as discovered to contain a hardcoded Administrator password. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix invalid page access after closing deferred I/O devices
When a fbdev with deferred I/O is once opened and closed, the dirty
pages still remain queued in the pageref list, and eventually later
those may be processed in the delayed work. This may lead to a
corruption of pages, hitting an Oops.
This patch makes sure to cancel the delayed work and clean up the
pageref list at closing the device for addressing the bug. A part of
the cleanup code is factored out as a new helper function that is
called from the common fb_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio: fix possible resource leaks in some error paths
If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can
not release the resources, because the sdio function is not presented
in these two cases, it won't call of_node_put() or put_device().
To fix these leaks, make sdio_func_present() only control whether
device_del() needs to be called or not, then always call of_node_put()
and put_device().
In error case in sdio_init_func(), the reference of 'card->dev' is
not get, to avoid redundant put in sdio_free_func_cis(), move the
get_device() to sdio_alloc_func() and put_device() to sdio_release_func(),
it can keep the get/put function be balanced.
Without this patch, while doing fault inject test, it can get the
following leak reports, after this fix, the leak is gone.
unreferenced object 0xffff888112514000 (size 2048):
comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s)
hex dump (first 32 bytes):
00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff ..o.....`X......
10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff .@Q......@Q.....
backtrace:
[<000000009e5931da>] kmalloc_trace+0x21/0x110
[<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core]
[<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core]
[<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core]
[<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]
unreferenced object 0xffff888112511000 (size 2048):
comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s)
hex dump (first 32 bytes):
00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff .@Q......X......
10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff ..Q.......Q.....
backtrace:
[<000000009e5931da>] kmalloc_trace+0x21/0x110
[<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core]
[<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core]
[<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core] |
| In the Linux kernel, the following vulnerability has been resolved:
net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
syzbot reported that act_len in kalmia_send_init_packet() is
uninitialized when passing it to the first usb_bulk_msg error path. Jiri
Pirko noted that it's pointless to pass it in the error path, and that
the value that would be printed in the second error path would be the
value of act_len from the first call to usb_bulk_msg.[1]
With this in mind, let's just not pass act_len to the usb_bulk_msg error
paths.
1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/ |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: ipq8074: fix PCI-E clock oops
Fix PCI-E clock related kernel oops that are caused by a missing clock
parent.
pcie0_rchng_clk_src has num_parents set to 2 but only one parent is
actually set via parent_hws, it should also have "XO" defined.
This will cause the kernel to panic on a NULL pointer in
clk_core_get_parent_by_index().
So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent
data.
Since there is already an existing static const char * const gcc_xo_gpll0[]
used to provide the same parents via parent_names convert those users to
clk_parent_data as well.
Without this earlycon is needed to even catch the OOPS as it will reset
the board before serial is initialized with the following:
[ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000
[ 0.232322] Mem abort info:
[ 0.239094] ESR = 0x96000004
[ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.244908] SET = 0, FnV = 0
[ 0.250377] EA = 0, S1PTW = 0
[ 0.253236] FSC = 0x04: level 0 translation fault
[ 0.256277] Data abort info:
[ 0.261141] ISV = 0, ISS = 0x00000004
[ 0.264262] CM = 0, WnR = 0
[ 0.267820] [0000a00000000000] address between user and kernel address ranges
[ 0.270954] Internal error: Oops: 96000004 [#1] SMP
[ 0.278067] Modules linked in:
[ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0
[ 0.285882] Hardware name: Xiaomi AX3600 (DT)
[ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec
[ 0.303067] lr : __clk_register+0x1d8/0x820
[ 0.308273] sp : ffffffc01111b7d0
[ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040
[ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800
[ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828
[ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020
[ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a
[ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006
[ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000
[ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06
[ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001
[ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700
[ 0.379982] Call trace:
[ 0.387091] clk_core_get_parent_by_index+0x68/0xec
[ 0.389351] __clk_register+0x1d8/0x820
[ 0.394210] devm_clk_hw_register+0x5c/0xe0
[ 0.398030] devm_clk_register_regmap+0x44/0x8c
[ 0.402198] qcom_cc_really_probe+0x17c/0x1d0
[ 0.406711] qcom_cc_probe+0x34/0x44
[ 0.411224] gcc_ipq8074_probe+0x18/0x30
[ 0.414869] platform_probe+0x68/0xe0
[ 0.418776] really_probe.part.0+0x9c/0x30c
[ 0.422336] __driver_probe_device+0x98/0x144
[ 0.426329] driver_probe_device+0x44/0x11c
[ 0.430842] __device_attach_driver+0xb4/0x120
[ 0.434836] bus_for_each_drv+0x68/0xb0
[ 0.439349] __device_attach+0xb0/0x170
[ 0.443081] device_initial_probe+0x14/0x20
[ 0.446901] bus_probe_device+0x9c/0xa4
[ 0.451067] device_add+0x35c/0x834
[ 0.454886] of_device_add+0x54/0x64
[ 0.458360] of_platform_device_create_pdata+0xc0/0x100
[ 0.462181] of_platform_bus_create+0x114/0x370
[ 0.467128] of_platform_bus_create+0x15c/0x370
[ 0.471641] of_platform_populate+0x50/0xcc
[ 0.476155] of_platform_default_populate_init+0xa8/0xc8
[ 0.480324] do_one_initcall+0x50/0x1b0
[ 0.485877] kernel_init_freeable+0x234/0x29c
[ 0.489436] kernel_init+0x24/0x120
[ 0.493948] ret_from_fork+0x10/0x20
[ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042)
[ 0.501079] ---[ end trace 4ca7e1129da2abce ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix a potential gpu_metrics_table memory leak
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(),
but not freed in int smu_v12_0_fini_smc_tables(). Free it! |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-compress: prevent the potentially use of null pointer
There is one call trace that snd_soc_register_card()
->snd_soc_bind_card()->soc_init_pcm_runtime()
->snd_soc_dai_compress_new()->snd_soc_new_compress().
In the trace the 'codec_dai' transfers from card->dai_link,
and we can see from the snd_soc_add_pcm_runtime() in
snd_soc_bind_card() that, if value of card->dai_link->num_codecs
is 0, then 'codec_dai' could be null pointer caused
by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'.
And snd_soc_register_card() is called by various platforms.
Therefore, it is better to add the check in the case of misusing.
And because 'cpu_dai' has already checked in soc_init_pcm_runtime(),
there is no need to check again.
Adding the check as follow, then if 'codec_dai' is null,
snd_soc_new_compress() will not pass through the check
'if (playback + capture != 1)', avoiding the leftover use of
'codec_dai'. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ir_toy: free before error exiting
Fix leak in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix the pre-flush when appending to a file in writethrough mode
In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH
or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed
on a buffered file. When setting up for write-through, we flush any
conflicting writes in the region and wait for the write to complete,
failing if there's a write error to return.
The issue arises if we're writing at or above the EOF position because we
skip the flush and - more importantly - the wait. This becomes a problem
if there's a partial folio at the end of the file that is being written out
and we want to make a write to it too. Both the already-running write and
the write we start both want to clear the writeback mark, but whoever is
second causes a warning looking something like:
------------[ cut here ]------------
R=00000012: folio 11 is not under writeback
WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105
...
CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ...
...
Workqueue: events_unbound netfs_write_collection_worker
...
RIP: 0010:netfs_writeback_lookup_folio
Fix this by making the flush-and-wait unconditional. It will do nothing if
there are no folios in the pagecache and will return quickly if there are
no folios in the region specified.
Further, move the WBC attachment above the flush call as the flush is going
to attach a WBC and detach it again if it is not present - and since we
need one anyway we might as well share it. |
| A vulnerability in QCMS version 6.0.5 allows authenticated users to read arbitrary files from the server due to insufficient validation of the "Name" parameter in the backend template editor. By manipulating the parameter, attackers can perform directory traversal and access sensitive files outside the intended template directory, potentially exposing system configuration, PHP source code, or other sensitive information. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/omap: Fix regression in probe for NULL pointer dereference
Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:
__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24
This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.
Looks like the regression already happened with an earlier commit
6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix mpol_new leak in shared_policy_replace
If mpol_new is allocated but not used in restart loop, mpol_new will be
freed via mpol_put before returning to the caller. But refcnt is not
initialized yet, so mpol_put could not do the right things and might
leak the unused mpol_new. This would happen if mempolicy was updated on
the shared shmem file while the sp->lock has been dropped during the
memory allocation.
This issue could be triggered easily with the below code snippet if
there are many processes doing the below work at the same time:
shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT);
shm = shmat(shmid, 0, 0);
loop many times {
mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0);
mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask,
maxnode, 0);
} |
| Tyler Technologies ERP Pro 9 SaaS allows an authenticated user to escape the application and execute limited operating system commands within the remote Microsoft Windows environment with the privileges of the authenticated user. Tyler Technologies deployed hardened remote Windows environment settings to all ERP Pro 9 SaaS customer environments as of 2025-08-01. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: Fix crash due to OOB write
the driver uses libata's "tag" values from in various arrays.
Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32,
the value of the SATA_DWC_QCMD_MAX needs to account for that.
Otherwise ATA_TAG_INTERNAL usage cause similar crashes like
this as reported by Tice Rex on the OpenWrt Forum and
reproduced (with symbols) here:
| BUG: Kernel NULL pointer dereference at 0x00000000
| Faulting instruction address: 0xc03ed4b8
| Oops: Kernel access of bad area, sig: 11 [#1]
| BE PAGE_SIZE=4K PowerPC 44x Platform
| CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0
| NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c
| REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163)
| MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000
| DEAR: 00000000 ESR: 00000000
| GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...]
| [..]
| NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254
| LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| Call Trace:
| [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable)
| [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524
| [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0
| [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204
| [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130
| [...]
This is because sata_dwc_dma_xfer_complete() NULLs the
dma_pending's next neighbour "chan" (a *dma_chan struct) in
this '32' case right here (line ~735):
> hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes
the NULL'd hsdevp->chan to the dmaengine_slave_config() which then
causes the crash.
With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1.
This avoids the OOB. But please note, there was a worthwhile discussion
on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not
be a "fake" 33 command-long queue size.
Ideally, the dw driver should account for the ATA_TAG_INTERNAL.
In Damien Le Moal's words: "... having looked at the driver, it
is a bigger change than just faking a 33rd "tag" that is in fact
not a command tag at all."
BugLink: https://github.com/openwrt/openwrt/issues/9505 |
