| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: Fix memory leak in dwc2_hcd_init
usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: add reserved GDT blocks check
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
We need to release directory fid if we fail halfway through open
This fixes fid leaking with xfstests generic 531 |
| In the Linux kernel, the following vulnerability has been resolved:
9p: fix fid refcount leak in v9fs_vfs_get_link
we check for protocol version later than required, after a fid has
been obtained. Just move the version check earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ibmvfc: Store vhost pointer during subcrq allocation
Currently the back pointer from a queue to the vhost adapter isn't set
until after subcrq interrupt registration. The value is available when a
queue is first allocated and can/should be also set for primary and async
queues as well as subcrqs.
This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS
interrupt controller where a pending subcrq interrupt from the previous
kernel can be replayed immediately upon IRQ registration resulting in
dereference of a garbage backpointer in ibmvfc_interrupt_scsi().
Kernel attempted to read user page (58) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000058
Faulting instruction address: 0xc008000003216a08
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc]
LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
Call Trace:
[c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable)
[c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
[c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188
[c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310
[c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80
[c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0
[c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130
[c000000014622f60] [0000000020000000] 0x20000000
[c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0
[c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0
[c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170
[c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0
[c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0
[c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230
[c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc]
[c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc]
[c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc]
[c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc]
[c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Patchwork: https://patchwork.freedesktop.org/patch/488473/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
Latest kernel will explode on the PHY interrupt config, since it depends
now on allocated priv. So, run probe to allocate priv to fix it.
ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34
...
Call Trace:
[<8050e8a8>] at803x_config_intr+0x5c/0xd0
[<80504b34>] phy_request_interrupt+0xa8/0xd0
[<8050289c>] phylink_bringup_phy+0x2d8/0x3ac
[<80502b68>] phylink_fwnode_phy_connect+0x118/0x130
[<8074d8ec>] dsa_slave_create+0x270/0x420
[<80743b04>] dsa_port_setup+0x12c/0x148
[<8074580c>] dsa_register_switch+0xaf0/0xcc0
[<80511344>] ar9331_sw_probe+0x370/0x388
[<8050cb78>] mdio_probe+0x44/0x70
[<804df300>] really_probe+0x200/0x424
[<804df7b4>] __driver_probe_device+0x290/0x298
[<804df810>] driver_probe_device+0x54/0xe4
[<804dfd50>] __device_attach_driver+0xe4/0x130
[<804dcb00>] bus_for_each_drv+0xb4/0xd8
[<804dfac4>] __device_attach+0x104/0x1a4
[<804ddd24>] bus_probe_device+0x48/0xc4
[<804deb44>] deferred_probe_work_func+0xf0/0x10c
[<800a0ffc>] process_one_work+0x314/0x4d4
[<800a17fc>] worker_thread+0x2a4/0x354
[<800a9a54>] kthread+0x134/0x13c
[<8006306c>] ret_from_kernel_thread+0x14/0x1c
Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it
too. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
of_find_node_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
xtensa: Fix refcount leak bug in time.c
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
xtensa: xtfpga: Fix refcount leak bug in setup
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: exynos: Fix refcount leak in exynos_map_pmu
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() checks null pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: Fix refcount leak in axxia_boot_secondary
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak. |
| Use after free in Microsoft Virtual Hard Drive allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
In brcmstb_init_sram, it pass dn to of_address_to_resource(),
of_address_to_resource() will call of_find_device_by_node() to take
reference, so we should release the reference returned by
of_find_matching_node(). |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function doesn't call of_node_put() in some error paths.
To unify the structure, Add put_node label and goto it on errors. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cm: Fix memory leak in ib_cm_insert_listen
cm_alloc_id_priv() allocates resource for the cm_id_priv. When
cm_init_listen() fails it doesn't free it, leading to memory leak.
Add the missing error unwind. |
| In the Linux kernel, the following vulnerability has been resolved:
linux/dim: Fix divide by 0 in RDMA DIM
Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio ==
0.
CallTrace:
Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020
task: ffff880194b78000 task.stack: ffffc90006714000
RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat]
RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202
RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09
R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff880c10e80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
ib_poll_handler+0x43/0x80 [ib_core]
irq_poll_softirq+0xae/0x110
__do_softirq+0xd1/0x28c
irq_exit+0xde/0xf0
do_IRQ+0x54/0xe0
common_interrupt+0x8f/0x8f
</IRQ>
? cpuidle_enter_state+0xd9/0x2a0
? cpuidle_enter_state+0xc7/0x2a0
? do_idle+0x170/0x1d0
? cpu_startup_entry+0x6f/0x80
? start_secondary+0x1b9/0x210
? secondary_startup_64+0xa5/0xb0
Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df
RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0 |
