| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: purge error queues in socket destructors
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit().
syzbot reported memory leak of struct cred. [0]
nfsd_nl_threads_set_doit() passes get_current_cred() to
nfsd_svc(), but put_cred() is not called after that.
The cred is finally passed down to _svc_xprt_create(),
which calls get_cred() with the cred for struct svc_xprt.
The ownership of the refcount by get_current_cred() is not
transferred to anywhere and is just leaked.
nfsd_svc() is also called from write_threads(), but it does
not bump file->f_cred there.
nfsd_nl_threads_set_doit() is called from sendmsg() and
current->cred does not go away.
Let's use current_cred() in nfsd_nl_threads_set_doit().
[0]:
BUG: memory leak
unreferenced object 0xffff888108b89480 (size 184):
comm "syz-executor", pid 5994, jiffies 4294943386
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 369454a7):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x412/0x580 mm/slub.c:5270
prepare_creds+0x22/0x600 kernel/cred.c:185
copy_creds+0x44/0x290 kernel/cred.c:286
copy_process+0x7a7/0x2870 kernel/fork.c:2086
kernel_clone+0xac/0x6e0 kernel/fork.c:2651
__do_sys_clone+0x7f/0xb0 kernel/fork.c:2792
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix refcount leak for tagset_refcnt
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef |
| In the Linux kernel, the following vulnerability has been resolved:
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix recursive locking in __configfs_open_file()
In flush_write_buffer, &p->frag_sem is acquired and then the loaded store
function is called, which, here, is target_core_item_dbroot_store(). This
function called filp_open(), following which these functions were called
(in reverse order), according to the call trace:
down_read
__configfs_open_file
do_dentry_open
vfs_open
do_open
path_openat
do_filp_open
file_open_name
filp_open
target_core_item_dbroot_store
flush_write_buffer
configfs_write_iter
target_core_item_dbroot_store() tries to validate the new file path by
trying to open the file path provided to it; however, in this case, the bug
report shows:
db_root: not a directory: /sys/kernel/config/target/dbroot
indicating that the same configfs file was tried to be opened, on which it
is currently working on. Thus, it is trying to acquire frag_sem semaphore
of the same file of which it already holds the semaphore obtained in
flush_write_buffer(), leading to acquiring the semaphore in a nested manner
and a possibility of recursive locking.
Fix this by modifying target_core_item_dbroot_store() to use kern_path()
instead of filp_open() to avoid opening the file using filesystem-specific
function __configfs_open_file(), and further modifying it to make this fix
compatible. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
Fix a user triggerable leak on the system call failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix null-ptr-deref in lec_arp_clear_vccs
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix oops due to uninitialised var in smb2_unlink()
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit
through slave devices, but does not update skb->dev to the slave device
beforehand.
When a gretap tunnel is a TEQL slave, the transmit path reaches
iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0
master) and later calls iptunnel_xmit_stats(dev, pkt_len). This
function does:
get_cpu_ptr(dev->tstats)
Since teql_master_setup() does not set dev->pcpu_stat_type to
NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats
for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes
NULL + __per_cpu_offset[cpu], resulting in a page fault.
BUG: unable to handle page fault for address: ffff8880e6659018
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 68bc067 P4D 68bc067 PUD 0
Oops: Oops: 0002 [#1] SMP KASAN PTI
RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89)
Call Trace:
<TASK>
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
__gre_xmit (net/ipv4/ip_gre.c:478)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
teql_master_xmit (net/sched/sch_teql.c:319)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
neigh_direct_output (net/core/neighbour.c:1660)
ip_finish_output2 (net/ipv4/ip_output.c:237)
__ip_finish_output.part.0 (net/ipv4/ip_output.c:315)
ip_mc_output (net/ipv4/ip_output.c:369)
ip_send_skb (net/ipv4/ip_output.c:1508)
udp_send_skb (net/ipv4/udp.c:1195)
udp_sendmsg (net/ipv4/udp.c:1485)
inet_sendmsg (net/ipv4/af_inet.c:859)
__sys_sendto (net/socket.c:2206)
Fix this by setting skb->dev = slave before calling
netdev_start_xmit(), so that tunnel xmit functions see the correct
slave device with properly allocated tstats. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add xmit recursion limit to tunnel xmit functions
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem"
This reverts commit 7294863a6f01248d72b61d38478978d638641bee.
This commit was erroneously applied again after commit 0ab5d711ec74
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
(cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080) |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Fix stats report corruption on queue count change
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: maple: free entry on mas_store_gfp() failure
regcache_maple_write() allocates a new block ('entry') to merge
adjacent ranges and then stores it with mas_store_gfp().
When mas_store_gfp() fails, the new 'entry' remains allocated and
is never freed, leaking memory.
Free 'entry' on the failure path; on success continue freeing the
replaced neighbor blocks ('lower', 'upper'). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: free potentially allocated iovec on cache put failure
If a read/write request goes through io_req_rw_cleanup() and has an
allocated iovec attached and fails to put to the rw_cache, then it may
end up with an unaccounted iovec pointer. Have io_rw_recycle() return
whether it recycled the request or not, and use that to gauge whether to
free a potential iovec or not. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Initialize netdev pointer before queue setup
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
