| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in PACM prior to SMR Feb-2026 Release 1 allows physical attacker to execute arbitrary commands. |
| Improper input validation in FacAtFunction prior to SMR Feb-2026 Release 1 allows privileged physical attacker to execute arbitrary command with system privilege. |
| Movable Type contains a stored cross-site scripting vulnerability in Edit Comment. If crafted input is stored by an attacker, arbitrary script may be executed on a logged-in user's web browser. Note that Movable Type 7 series and 8.4 series, which are End-of-Life (EOL), are affected by the vulnerability as well. |
| On a Cryptobox platform where administrator segregation based on entities is used, some vulnerabilities in Ercom Cryptobox administration console allows an authenticated entity administrator with knowledge to elevate his account to global administrator. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hv_netvsc: reject RSS hash key programming without RX indirection table
RSS configuration requires a valid RX indirection table. When the device
reports a single receive queue, rndis_filter_device_add() does not
allocate an indirection table, accepting RSS hash key updates in this
state leads to a hang.
Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return
-EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device
capabilities and prevents incorrect behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: scarlett2: Fix buffer overflow in config retrieval
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: intel-xway: fix OF node refcount leakage
Automated review spotted am OF node reference count leakage when
checking if the 'leds' child node exists.
Call of_put_node() to correctly maintain the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
When simple_write_to_buffer() succeeds, it returns the number of bytes
actually copied to the buffer. The code incorrectly uses 'count'
as the index for null termination instead of the actual bytes copied.
If count exceeds the buffer size, this leads to out-of-bounds write.
Add a check for the count and use the return value as the index.
The bug was validated using a demo module that mirrors the original
code and was tested under QEMU.
Pattern of the bug:
- A fixed 64-byte stack buffer is filled using count.
- If count > 64, the code still does buf[count] = '\0', causing an
- out-of-bounds write on the stack.
Steps for reproduce:
- Opens the device node.
- Writes 128 bytes of A to it.
- This overflows the 64-byte stack buffer and KASAN reports the OOB.
Found via static analysis. This is similar to the
commit da9374819eb3 ("iio: backend: fix out-of-bound write") |
| n8n is an open source workflow automation platform. Prior to version 1.123.2, a Cross-Site Scripting (XSS) vulnerability has been identified in the handling of webhook responses and related HTTP endpoints. Under certain conditions, the Content Security Policy (CSP) sandbox protection intended to isolate HTML responses may not be applied correctly. An authenticated user with permission to create or modify workflows could abuse this to execute malicious scripts with same-origin privileges when other users interact with the crafted workflow. This could lead to session hijacking and account takeover. This issue has been patched in version 1.123.2. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.10 and 2.5.0, vulnerabilities in the Git node allowed authenticated users with permission to create or modify workflows to execute arbitrary system commands or read arbitrary files on the n8n host. This issue has been patched in versions 1.123.10 and 2.5.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.9 and 2.2.1, a Cross-Site Scripting (XSS) vulnerability existed in a markdown rendering component used in n8n's interface, including workflow sticky notes and other areas that support markdown content. An authenticated user with permission to create or modify workflows could abuse this to execute scripts with same-origin privileges when other users interact with a maliciously crafted workflow. This could lead to session hijacking and account takeover. This issue has been patched in versions 1.123.9 and 2.2.1. |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.0, expandapk.Split drains the first gzip stream of an APK archive via io.Copy(io.Discard, gzi) without explicit bounds. With an attacker-controlled input stream, this can force large gzip inflation work and lead to resource exhaustion (availability impact). The Split function reads the first tar header, then drains the remainder of the gzip stream by reading from the gzip reader directly without any maximum uncompressed byte limit or inflate-ratio cap. A caller that parses attacker-controlled APK streams may be forced to spend excessive CPU time inflating gzip data, leading to timeouts or process slowdown. This issue has been patched in version 1.1.0. |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.1, an attacker who controls or compromises an APK repository used by apko could cause resource exhaustion on the build host. The ExpandApk function in pkg/apk/expandapk/expandapk.go expands .apk streams without enforcing decompression limits, allowing a malicious repository to serve a small, highly-compressed .apk that inflates into a large tar stream, consuming excessive disk space and CPU time, causing build failures or denial of service. This issue has been patched in version 1.1.1. |
| melange allows users to build apk packages using declarative pipelines. From version 0.3.0 to before 0.40.3, an attacker who can provide build input values, but not modify pipeline definitions, could execute arbitrary shell commands if the pipeline uses ${{vars.*}} or ${{inputs.*}} substitutions in working-directory. The field is embedded into shell scripts without proper quote escaping. This issue has been patched in version 0.40.3. |
| melange allows users to build apk packages using declarative pipelines. From version 0.10.0 to before 0.40.3, an attacker who can influence inputs to the patch pipeline could execute arbitrary shell commands on the build host. The patch pipeline in pkg/build/pipelines/patch.yaml embeds input-derived values (series paths, patch filenames, and numeric parameters) into shell scripts without proper quoting or validation, allowing shell metacharacters to break out of their intended context. The vulnerability affects the built-in patch pipeline which can be invoked through melange build and melange license-check operations. An attacker who can control patch-related inputs (e.g., through pull request-driven CI, build-as-a-service, or by influencing melange configurations) can inject shell metacharacters such as backticks, command substitutions $(…), semicolons, pipes, or redirections to execute arbitrary commands with the privileges of the melange build process. This issue has been patched in version 0.40.3. |
| Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal AT Internet SmartTag allows Cross-Site Scripting (XSS).This issue affects AT Internet SmartTag: from 0.0.0 before 1.0.1. |
| Group-Office is an enterprise customer relationship management and groupware tool. Prior to versions 6.8.150, 25.0.82, and 26.0.5, there is a remote code execution (RCE) vulnerability in Group-Office. The endpoint email/message/tnefAttachmentFromTempFile directly concatenates the user-controlled parameter tmp_file into an exec() call. By injecting shell metacharacters into tmp_file, an authenticated attacker can execute arbitrary system commands on the server. This issue has been patched in versions 6.8.150, 25.0.82, and 26.0.5. |
| cert-manager adds certificates and certificate issuers as resource types in Kubernetes clusters, and simplifies the process of obtaining, renewing and using those certificates. In versions from 1.18.0 to before 1.18.5 and from 1.19.0 to before 1.19.3, the cert-manager-controller performs DNS lookups during ACME DNS-01 processing (for zone discovery and propagation self-checks). By default, these lookups use standard unencrypted DNS. An attacker who can intercept and modify DNS traffic from the cert-manager-controller pod can insert a crafted entry into cert-manager's DNS cache. Accessing this entry will trigger a panic, resulting in denial‑of‑service (DoS) of the cert-manager controller. The issue can also be exploited if the authoritative DNS server for the domain being validated is controlled by a malicious actor. This issue has been patched in versions 1.18.5 and 1.19.3. |
| HtmlSanitizer is a .NET library for cleaning HTML fragments and documents from constructs that can lead to XSS attacks. Prior to versions 9.0.892 and 9.1.893-beta, if the template tag is allowed, its contents are not sanitized. The template tag is a special tag that does not usually render its contents, unless the shadowrootmode attribute is set to open or closed. This issue has been patched in versions 9.0.892 and 9.1.893-beta. |
| Navidrome is an open source web-based music collection server and streamer. Prior to version 0.60.0, authenticated users can crash the Navidrome server by supplying an excessively large size parameter to /rest/getCoverArt or to a shared-image URL (/share/img/<token>). When processing such requests, the server attempts to create an extremely large resized image, causing uncontrolled memory growth. This triggers the Linux OOM killer, terminates the Navidrome process, and results in a full service outage. If the system has sufficient memory and survives the allocation, Navidrome then writes these extremely large resized images into its cache directory, allowing an attacker to rapidly exhaust server disk space as well. This issue has been patched in version 0.60.0. |
