| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Restriction of Operations within the Bounds of a Memory Buffer and Stack-based Buffer Overflow vulnerabilities were discovered in Apache NuttX RTOS Bluetooth Stack (HCI and UART components) that may result in system crash, denial of service, or arbitrary code execution, after receiving maliciously crafted packets.
NuttX's Bluetooth HCI/UART stack users are advised to upgrade to version 12.9.0, which fixes the identified implementation issues.
This issue affects Apache NuttX: from 7.25 before 12.9.0. |
| JMSSink in all versions of Log4j 1.x is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration or if the configuration references an LDAP service the attacker has access to. The attacker can provide a TopicConnectionFactoryBindingName configuration causing JMSSink to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-4104. Note this issue only affects Log4j 1.x when specifically configured to use JMSSink, which is not the default. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions. |
| Improper authentication of an HTTP endpoint in the S3 Gateway of Apache Ozone 1.4.0 allows any authenticated Kerberos user to revoke and regenerate the S3 secrets of any other user. This is only possible if:
* ozone.s3g.secret.http.enabled is set to true. The default value of this configuration is false.
* The user configured in ozone.s3g.kerberos.principal is also configured in ozone.s3.administrators or ozone.administrators.
Users are recommended to upgrade to Apache Ozone version 1.4.1 which disables the affected endpoint. |
| Account users in Apache CloudStack by default are allowed to upload and register templates for deploying instances and volumes for attaching them as data disks to their existing instances. Due to missing validation checks for KVM-compatible templates or volumes in CloudStack 4.0.0 through 4.18.2.3 and 4.19.0.0 through 4.19.1.1, an attacker that can upload or register templates and volumes, can use them to deploy malicious instances or attach uploaded volumes to their existing instances on KVM-based environments and exploit this to gain access to the host filesystems that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of KVM-based infrastructure managed by CloudStack.
Users are recommended to upgrade to Apache CloudStack 4.18.2.4 or 4.19.1.2, or later, which addresses this issue.
Additionally, all user-uploaded or registered KVM-compatible templates and volumes can be scanned and checked that they are flat files that should not be using any additional or unnecessary features. For example, operators can run this on their secondary storage(s) and inspect output. An empty output for the disk being validated means it has no references to the host filesystems; on the other hand, if the output for the disk being validated is not empty, it might indicate a compromised disk.
for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info. If the output is not empty, that might indicate a compromised disk; check it carefully."; qemu-img info -U $file | grep file: ; printf "\n\n"; done
The command can also be run for the file-based primary storages; however, bear in mind that (i) volumes created from templates will have references for the templates at first and (ii) volumes can be consolidated while migrating, losing their references to the templates. Therefore, the command execution for the primary storages can show both false positives and false negatives.
For checking the whole template/volume features of each disk, operators can run the following command:
for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info."; qemu-img info -U $file; printf "\n\n"; done |
| Insecure Default Initialization of Resource vulnerability in Apache Solr.
New ConfigSets that are created via a Restore command, which copy a configSet from the backup and give it a new name, are created without setting the "trusted" metadata.
ConfigSets that do not contain the flag are trusted implicitly if the metadata is missing, therefore this leads to "trusted" ConfigSets that may not have been created with an Authenticated request.
"trusted" ConfigSets are able to load custom code into classloaders, therefore the flag is supposed to only be set when the request that uploads the ConfigSet is Authenticated & Authorized.
This issue affects Apache Solr: from 6.6.0 before 8.11.4, from 9.0.0 before 9.7.0. This issue does not affect Solr instances that are secured via Authentication/Authorization.
Users are primarily recommended to use Authentication and Authorization when running Solr. However, upgrading to version 9.7.0, or 8.11.4 will mitigate this issue otherwise. |
| Improper Authentication vulnerability in Apache Solr.
Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass.
A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path.
This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing.
This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0.
Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue. |
| SnakeYaml Deser Load Malicious xml rce vulnerability in Apache HertzBeat (incubating).
This vulnerability can only be exploited by authorized attackers.
This issue affects Apache HertzBeat (incubating): before 1.6.0.
Users are recommended to upgrade to version 1.6.0, which fixes the issue. |
| Potential SSRF in mod_rewrite in Apache HTTP Server 2.4.59 and earlier allows an attacker to cause unsafe RewriteRules to unexpectedly setup URL's to be handled by mod_proxy.
Users are recommended to upgrade to version 2.4.60, which fixes this issue. |
| Encoding problem in mod_proxy in Apache HTTP Server 2.4.59 and earlier allows request URLs with incorrect encoding to be sent to backend services, potentially bypassing authentication via crafted requests.
Users are recommended to upgrade to version 2.4.60, which fixes this issue. |
| SSRF in Apache HTTP Server on Windows allows to potentially leak NTLM hashes to a malicious server via SSRF and malicious requests or content
Users are recommended to upgrade to version 2.4.60 which fixes this issue. Note: Existing configurations that access UNC paths will have to configure new directive "UNCList" to allow access during request processing. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 18.12.14.
Users are recommended to upgrade to version 18.12.14, which fixes the issue. |
| ESI plugin does not have the limit for maximum inclusion depth, and that allows excessive memory consumption if malicious instructions are inserted.
Users can use a new setting for the plugin (--max-inclusion-depth) to limit it.
This issue affects Apache Traffic Server: from 10.0.0 through 10.0.5, from 9.0.0 through 9.2.10.
Users are recommended to upgrade to version 9.2.11 or 10.0.6, which fixes the issue. |
| ACL configured in ip_allow.config or remap.config does not use IP addresses that are provided by PROXY protocol.
Users can use a new setting (proxy.config.acl.subjects) to choose which IP addresses to use for the ACL if Apache Traffic Server is configured to accept PROXY protocol.
This issue affects undefined: from 10.0.0 through 10.0.6, from 9.0.0 through 9.2.10.
Users are recommended to upgrade to version 9.2.11 or 10.0.6, which fixes the issue. |
| A privilege escalation vulnerability exists in Apache CloudStack versions 4.10.0.0 through 4.20.0.0 where a malicious Domain Admin user in the ROOT domain can get the API key and secret key of user-accounts of Admin role type in the same domain. This operation is not appropriately restricted and allows the attacker to assume control over higher-privileged user-accounts. A malicious Domain Admin attacker can impersonate an Admin user-account and gain access to sensitive APIs and resources that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of infrastructure managed by CloudStack.
Users are recommended to upgrade to Apache CloudStack 4.19.3.0 or 4.20.1.0, which fixes the issue with the following:
* Strict validation on Role Type hierarchy: the caller's role must be equal to or higher than the target user's role.
* API privilege comparison: the caller must possess all privileges of the user they are operating on.
* Two new domain-level settings (restricted to the default admin):
- role.types.allowed.for.operations.on.accounts.of.same.role.type: Defines which role types are allowed to act on users of the same role type. Default: "Admin, DomainAdmin, ResourceAdmin".
- allow.operations.on.users.in.same.account: Allows/disallows user operations within the same account. Default: true. |
| A privilege escalation vulnerability exists in Apache CloudStack versions 4.10.0.0 through 4.20.0.0 where a malicious Domain Admin user in the ROOT domain can reset the password of user-accounts of Admin role type. This operation is not appropriately restricted and allows the attacker to assume control over higher-privileged user-accounts. A malicious Domain Admin attacker can impersonate an Admin user-account and gain access to sensitive APIs and resources that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of infrastructure managed by CloudStack.
Users are recommended to upgrade to Apache CloudStack 4.19.3.0 or 4.20.1.0, which fixes the issue with the following:
* Strict validation on Role Type hierarchy: the caller's user-account role must be equal to or higher than the target user-account's role.
* API privilege comparison: the caller must possess all privileges of the user they are operating on.
* Two new domain-level settings (restricted to the default Admin):
- role.types.allowed.for.operations.on.accounts.of.same.role.type: Defines which role types are allowed to act on users of the same role type. Default: "Admin, DomainAdmin, ResourceAdmin".
- allow.operations.on.users.in.same.account: Allows/disallows user operations within the same account. Default: true. |
| When an Apache CloudStack user-account creates a CKS-based Kubernetes cluster in a project, the API key and the secret key of the 'kubeadmin' user of the caller account are used to create the secret config in the CKS-based Kubernetes cluster. A member of the project who can access the CKS-based Kubernetes cluster, can also access the API key and secret key of the 'kubeadmin' user of the CKS cluster's creator's account. An attacker who's a member of the project can exploit this to impersonate and perform privileged actions that can result in complete compromise of the confidentiality, integrity, and availability of resources owned by the creator's account.
CKS users are recommended to upgrade to version 4.19.3.0 or 4.20.1.0, which fixes this issue.Updating Existing Kubernetes Clusters in ProjectsA service account should be created for each project to provide limited access specifically for Kubernetes cluster providers and autoscaling. Follow the steps below to create a new service account, update the secret inside the cluster, and regenerate existing API and service keys:1. Create a New Service AccountCreate a new account using the role "Project Kubernetes Service Role" with the following details:
Account Name
kubeadmin-<FIRST_EIGHT_CHARACTERS_OF_PROJECT_ID>
First Name
Kubernetes
Last Name
Service User
Account Type
0 (Normal User)
Role ID
<ID_OF_SERVICE_ROLE>
2. Add the Service Account to the ProjectAdd this account to the project where the Kubernetes cluster(s) are hosted.
3. Generate API and Secret KeysGenerate API Key and Secret Key for the default user of this account.
4. Update the CloudStack Secret in the Kubernetes ClusterCreate a temporary file `/tmp/cloud-config` with the following data:
api-url = <API_URL> # For example: <MS_URL>/client/api
api-key = <SERVICE_USER_API_KEY>
secret-key = <SERVICE_USER_SECRET_KEY>
project-id = <PROJECT_ID>
Delete the existing secret using kubectl and Kubernetes cluster config:
./kubectl --kubeconfig kube.conf -n kube-system delete secret cloudstack-secret
Create a new secret using kubectl and Kubernetes cluster config:
./kubectl --kubeconfig kube.conf -n kube-system create secret generic cloudstack-secret --from-file=/tmp/cloud-config
Remove the temporary file:
rm /tmp/cloud-config5. Regenerate API and Secret KeysRegenerate the API and secret keys for the original user account that was used to create the Kubernetes cluster. |
| Exposure of Sensitive Information to an Unauthorized Actor, Insertion of Sensitive Information into Log File vulnerability in the OpenIdAuthorizer of Apache IoTDB.
This issue affects Apache IoTDB: from 0.10.0 through 1.3.3, from 2.0.1-beta before 2.0.2.
Users are recommended to upgrade to version 1.3.4 and 2.0.2, which fix the issue. |
| Remote Code Execution with untrusted URI of UDF vulnerability in Apache IoTDB. The attacker who has privilege to create UDF can register malicious function from untrusted URI.
This issue affects Apache IoTDB: from 1.0.0 before 1.3.4.
Users are recommended to upgrade to version 1.3.4, which fixes the issue. |
| Authentication Bypass by Assumed-Immutable Data vulnerability in Apache HugeGraph-Server.
This issue affects Apache HugeGraph-Server: from 1.0.0 before 1.5.0.
Users are recommended to upgrade to version 1.5.0, which fixes the issue. |
| Faulty input validation in the core of Apache allows malicious or exploitable backend/content generators to split HTTP responses.
This issue affects Apache HTTP Server: through 2.4.58. |
