| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Handling of Exceptional Conditions vulnerability in the ZIP archive scanning component of mmaitre314 picklescan allows a remote attacker to bypass security scans. This is achieved by crafting a ZIP archive containing a file with a bad Cyclic Redundancy Check (CRC), which causes the scanner to halt and fail to analyze the contents for malicious pickle files. When the file incorrectly considered safe is loaded, it can lead to the execution of malicious code. |
| Mattermost versions 10.x <= 10.2 fail to accurately reflect missing settings, which allows confusion for admins regarding a Calls security-sensitive configuration via incorrect UI reporting. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: solidrun: Fix UB bug with devres
In psnet_open_pf_bar() and snet_open_vf_bar() a string later passed to
pcim_iomap_regions() is placed on the stack. Neither
pcim_iomap_regions() nor the functions it calls copy that string.
Should the string later ever be used, this, consequently, causes
undefined behavior since the stack frame will by then have disappeared.
Fix the bug by allocating the strings on the heap through
devm_kasprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem,
on huge=always tmpfs, issues a warning and then hangs (interruptibly):
WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9
CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2
...
copy_page_from_iter_atomic+0xa6/0x5ec
generic_perform_write+0xf6/0x1b4
shmem_file_write_iter+0x54/0x67
Fix copy_page_from_iter_atomic() by limiting it in that case
(include/linux/skbuff.h skb_frag_must_loop() does similar).
But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too
surprising, has outlived its usefulness, and should just be removed? |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix warning when destroy 'cifs_io_request_pool'
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Handle lack of irqdomain gracefully
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node blkaddr in truncate_node()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2534!
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909
f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288
f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856
evict+0x4e8/0x9b0 fs/inode.c:723
f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986
f2fs_create+0x357/0x530 fs/f2fs/namei.c:394
lookup_open fs/namei.c:3595 [inline]
open_last_lookups fs/namei.c:3694 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3930
do_filp_open+0x235/0x490 fs/namei.c:3960
do_sys_openat2+0x13e/0x1d0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be
corrupted, then it will cause system panic when using it in
f2fs_invalidate_blocks(), to avoid this, let's add sanity check on
nat blkaddr in truncate_node(). |
| Mattermost versions 10.0.x <= 10.0.1, 10.1.x <= 10.1.1, 9.11.x <= 9.11.3, 9.5.x <= 9.5.11 fail to properly validate email addresses which allows an unauthenticated user to bypass email domain restrictions via carefully crafted input on email registration. |
| Team ENVY, a Security Research TEAM has found a flaw that allows for a remote code execution on the NVR. An attacker could inject malformed data into url input parameters to reboot the NVR. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. |
| A CWE-754 – Improper Check for Unusual or Exceptional Conditions vulnerability exists in Magelis HMI Panels (all versions of - HMIGTO, HMISTO, XBTGH, HMIGTU, HMIGTUX, HMISCU, HMISTU, XBTGT, XBTGT, HMIGXO, HMIGXU), which could cause a temporary freeze of the HMI when a high rate of frames is received. When the attack stops, the buffered commands are processed by the HMI panel. |
| psPAS PowerShell module does not explicitly enforce TLS 1.2 within the 'Get-PASSAMLResponse' function during the SAML authentication process. An unauthenticated attacker in a 'Man-in-the-Middle' position could manipulate the TLS handshake and downgrade TLS to a deprecated protocol. Fixed in 7.0.209. |
| Mattermost versions 9.11.x <= 9.11.6 fail to filter out DMs from the deleted channels endpoint which allows an attacker to infer user IDs and other metadata from deleted DMs if someone had manually marked DMs as deleted in the database. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore™ for Intel Kaby Lake, Phoenix SecureCore™ for Intel Coffee Lake, Phoenix SecureCore™ for Intel Comet Lake, Phoenix SecureCore™ for Intel Ice Lake allows Input Data Manipulation.This issue affects SecureCore™ for Intel Kaby Lake: before 4.0.1.1012; SecureCore™ for Intel Coffee Lake: before 4.1.0.568; SecureCore™ for Intel Comet Lake: before 4.2.1.292; SecureCore™ for Intel Ice Lake: before 4.2.0.334. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore™ for Intel Kaby Lake, Phoenix SecureCore™ for Intel Coffee Lake, Phoenix SecureCore™ for Intel Comet Lake, Phoenix SecureCore™ for Intel Ice Lake allows Input Data Manipulation.This issue affects SecureCore™ for Intel Kaby Lake: before 4.0.1.1012; SecureCore™ for Intel Coffee Lake: before 4.1.0.568; SecureCore™ for Intel Comet Lake: before 4.2.1.292; SecureCore™ for Intel Ice Lake: before 4.2.0.334. |
| IBM MQ 9.3 LTS, 9.3 CD, 9.4 LTS, and 9.4 CD
could allow a local user to cause a denial of service due to an improper check for unusual or exceptional conditions. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore Technology 4 allows Input Data Manipulation.This issue affects SecureCore Technology 4: from 4.0.1.0 before 4.0.1.1018, from 4.1.0.1 before 4.1.0.573, from 4.2.0.1 before 4.2.0.338, from 4.2.1.1 before 4.2.1.300, from 4.3.0.1 before 4.3.0.244, from 4.3.1.1 before 4.3.1.187, from 4.4.0.1 before 4.4.0.299, from 4.5.0.1 before 4.5.0.231, from 4.5.1.1 before 4.5.1.103, from 4.5.5.1 before 4.5.5.36, from 4.6.0.1 before 4.6.0.67. |
| Mattermost Confluence Plugin version <1.5.0 fails to handle unexpected request body which allows attackers to crash the plugin via constant hit to server webhook endpoint with an invalid request body. |
| Mattermost Confluence Plugin version <1.5.0 fails to handle unexpected request body which allows attackers to crash the plugin via constant hit to update channel subscription endpoint with an invalid request body. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
Before using list_first_entry, make sure to check that list is not
empty, if list is empty return -ENODATA.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL? |
| Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. In Kata Containers versions from 3.20.0 and before, a malicious host can circumvent initdata verification. On TDX systems running confidential guests, a malicious host can selectively fail IO operations to skip initdata verification. This allows an attacker to launch arbitrary workloads while being able to attest successfully to Trustee impersonating any benign workload. This issue has been patched in Kata Containers version 3.21.0. |
