| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Action1 Uncontrolled Search Path Element Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Action1. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the configuration of OpenSSL. The product loads an OpenSSL configuration file from an unsecured location. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-26767. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix potential out-of-bounds page table access during batched unmap
As pointed out by David[1], the batched unmap logic in
try_to_unmap_one() may read past the end of a PTE table when a large
folio's PTE mappings are not fully contained within a single page
table.
While this scenario might be rare, an issue triggerable from userspace
must be fixed regardless of its likelihood. This patch fixes the
out-of-bounds access by refactoring the logic into a new helper,
folio_unmap_pte_batch().
The new helper correctly calculates the safe batch size by capping the
scan at both the VMA and PMD boundaries. To simplify the code, it also
supports partial batching (i.e., any number of pages from 1 up to the
calculated safe maximum), as there is no strong reason to special-case
for fully mapped folios. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
When num_parents is 4, __clk_register() occurs an out-of-bounds
when accessing parent_names member. Use ARRAY_SIZE() instead of
hardcode number here.
BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8
Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59
Hardware name: NXP i.MX95 19X19 board (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x8c/0xcc
print_report+0x398/0x5fc
kasan_report+0xd4/0x114
__asan_report_load8_noabort+0x20/0x2c
__clk_register+0x1844/0x20d8
clk_hw_register+0x44/0x110
__clk_hw_register_mux+0x284/0x3a8
imx95_bc_probe+0x4f4/0xa70 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-bufio: fix sched in atomic context
If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP
is enabled for dm-bufio. However, when bufio tries to evict buffers, there
is a chance to trigger scheduling in spin_lock_bh, the following warning
is hit:
BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
4 locks held by kworker/2:2/123:
#0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970
#1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970
#2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710
#3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 #305 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: dm_bufio_cache do_global_cleanup
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
__might_resched+0x360/0x4e0
do_global_cleanup+0x2f5/0x710
process_one_work+0x7db/0x1970
worker_thread+0x518/0xea0
kthread+0x359/0x690
ret_from_fork+0xf3/0x1b0
ret_from_fork_asm+0x1a/0x30
</TASK>
That can be reproduced by:
veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb
SIZE=$(blockdev --getsz /dev/vda)
dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet"
mount /dev/dm-0 /mnt -o ro
echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes
[read files in /mnt] |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix crash in timerlat_dump_stack()
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix race between cache write completion and ALL_QUEUED being set
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.7 before 18.3.6, 18.4 before 18.4.4, and 18.5 before 18.5.2, that could have allowed a blocked user to access sensitive information by establishing GraphQL subscriptions through WebSocket connections. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: remove duplicate page_pool_put_full_page()
page_pool_put_full_page() should only be invoked when freeing Rx buffers
or building a skb if the size is too short. At other times, the pages
need to be reused. So remove the redundant page put. In the original
code, double free pages cause kernel panic:
[ 876.949834] __irq_exit_rcu+0xc7/0x130
[ 876.949836] common_interrupt+0xb8/0xd0
[ 876.949838] </IRQ>
[ 876.949838] <TASK>
[ 876.949840] asm_common_interrupt+0x22/0x40
[ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246
[ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000
[ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e
[ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed
[ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580
[ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000
[ 876.949852] ? cpuidle_enter_state+0xb3/0x420
[ 876.949855] cpuidle_enter+0x29/0x40
[ 876.949857] cpuidle_idle_call+0xfd/0x170
[ 876.949859] do_idle+0x7a/0xc0
[ 876.949861] cpu_startup_entry+0x25/0x30
[ 876.949862] start_secondary+0x117/0x140
[ 876.949864] common_startup_64+0x13e/0x148
[ 876.949867] </TASK>
[ 876.949868] ---[ end trace 0000000000000000 ]---
[ 876.949869] ------------[ cut here ]------------
[ 876.949870] list_del corruption, ffffead40445a348->next is NULL
[ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120
[ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E)
[ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi
[ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary)
[ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE
[ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120
[ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8
[ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282
[ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000
[ 876.949942] RDX: 0000000000000105 RSI: 00000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
Commit 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic") has
accidentally removed the critical piece of commit c730fce7c70c
("s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL"), causing
intermittent kernel panics in e.g. perf's on_switch() prog to reappear.
Restore the fix and add a comment. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: Revert "soundwire: qcom: Add set_channel_map api support"
This reverts commit 7796c97df6b1b2206681a07f3c80f6023a6593d5.
This patch broke Dragonboard 845c (sdm845). I see:
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f20003e8 [#1] SMP
pc : qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom]
lr : snd_soc_dai_set_channel_map+0x34/0x78
Call trace:
qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] (P)
sdm845_dai_init+0x18c/0x2e0 [snd_soc_sdm845]
snd_soc_link_init+0x28/0x6c
snd_soc_bind_card+0x5f4/0xb0c
snd_soc_register_card+0x148/0x1a4
devm_snd_soc_register_card+0x50/0xb0
sdm845_snd_platform_probe+0x124/0x148 [snd_soc_sdm845]
platform_probe+0x6c/0xd0
really_probe+0xc0/0x2a4
__driver_probe_device+0x7c/0x130
driver_probe_device+0x40/0x118
__device_attach_driver+0xc4/0x108
bus_for_each_drv+0x8c/0xf0
__device_attach+0xa4/0x198
device_initial_probe+0x18/0x28
bus_probe_device+0xb8/0xbc
deferred_probe_work_func+0xac/0xfc
process_one_work+0x244/0x658
worker_thread+0x1b4/0x360
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Kernel panic - not syncing: BRK handler: Fatal exception
Dan has also reported following issues with the original patch
https://lore.kernel.org/all/33fe8fe7-719a-405a-9ed2-d9f816ce1d57@sabinyo.mountain/
Bug #1:
The zeroeth element of ctrl->pconfig[] is supposed to be unused. We
start counting at 1. However this code sets ctrl->pconfig[0].ch_mask = 128.
Bug #2:
There are SLIM_MAX_TX_PORTS (16) elements in tx_ch[] array but only
QCOM_SDW_MAX_PORTS + 1 (15) in the ctrl->pconfig[] array so it corrupts
memory like Yongqin Liu pointed out.
Bug 3:
Like Jie Gan pointed out, it erases all the tx information with the rx
information. |
| A local stack-based buffer overflow vulnerability exists in the infostat.cgi and cstecgi.cgi binaries of ToToLink routers (A720R V4.1.5cu.614_B20230630, LR1200GB V9.1.0u.6619_B20230130, and NR1800X V9.1.0u.6681_B20230703). Both programs parse the contents of /proc/net/arp using sscanf() with "%s" format specifiers into fixed-size stack buffers without length validation. Specifically, one function writes user-controlled data into a single-byte buffer, and the other into adjacent small arrays without bounds checking. An attacker who controls the contents of /proc/net/arp can trigger memory corruption, leading to denial of service or potential arbitrary code execution. |
| A vulnerability in Absolute Persistence® versions before 2.8 exists when it is not activated. This may allow a skilled attacker with both physical access to the device, and full hostile network control, to initiate OS commands on the device. To remediate this vulnerability, update the device firmware to the latest available version. Please contact the device manufacturer for upgrade instructions or contact Absolute Security, see reference below. |
| An unauthenticated command injection vulnerability exists in the ToToLink LR1200GB Router firmware V9.1.0u.6619_B20230130 within the cstecgi.cgi binary (sub_41EC68 function). The binary reads the "imei" parameter from a web request and verifies only that it is 15 characters long. The parameter is then directly inserted into a system command using sprintf() and executed with system(). Maliciously crafted IMEI input can execute arbitrary commands on the router without authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: backend: fix out-of-bound write
The buffer is set to 80 character. If a caller write more characters,
count is truncated to the max available space in "simple_write_to_buffer".
But afterwards a string terminator is written to the buffer at offset count
without boundary check. The zero termination is written OUT-OF-BOUND.
Add a check that the given buffer is smaller then the buffer to prevent. |
| A stack buffer overflow vulnerability exists in the ToToLink LR1200GB (V9.1.0u.6619_B20230130) and NR1800X (V9.1.0u.6681_B20230703) Router firmware within the cstecgi.cgi binary (setDefResponse function). The binary reads the "IpAddress" parameter from a web request and copies it into a fixed-size stack buffer using strcpy() without any length validation. Maliciously crafted input can overflow the buffer, leading to potential arbitrary code execution or memory corruption, without requiring authentication. |
| An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
smc: Fix various oops due to inet_sock type confusion.
syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while
freeing inet_sk(sk)->inet_opt.
The address was freed multiple times even though it was read-only memory.
cipso_v4_sock_setattr() did nothing wrong, and the root cause was type
confusion.
The cited commit made it possible to create smc_sock as an INET socket.
The issue is that struct smc_sock does not have struct inet_sock as the
first member but hijacks AF_INET and AF_INET6 sk_family, which confuses
various places.
In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(),
which is an address of a function in the text segment.
$ pahole -C inet_sock vmlinux
struct inet_sock {
...
struct ip_options_rcu * inet_opt; /* 784 8 */
$ pahole -C smc_sock vmlinux
struct smc_sock {
...
void (*clcsk_data_ready)(struct sock *); /* 784 8 */
The same issue for another field was reported before. [2][3]
At that time, an ugly hack was suggested [4], but it makes both INET
and SMC code error-prone and hard to change.
Also, yet another variant was fixed by a hacky commit 98d4435efcbf3
("net/smc: prevent NULL pointer dereference in txopt_get").
Instead of papering over the root cause by such hacks, we should not
allow non-INET socket to reuse the INET infra.
Let's add inet_sock as the first member of smc_sock.
[0]:
kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73
WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955
Modules linked in:
CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955
lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955
sp : ffff8000a03a7730
x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3
x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00
x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0
x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff
x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c
x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000
x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360
x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000
Call trace:
kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P)
cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914
netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000
smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581
smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912
security_inode_setsecurity+0x118/0x3c0 security/security.c:2706
__vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251
__vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295
vfs_setxattr+0x158/0x2ac fs/xattr.c:321
do_setxattr fs/xattr.c:636 [inline]
file_setxattr+0x1b8/0x294 fs/xattr.c:646
path_setxattrat+0x2ac/0x320 fs/xattr.c:711
__do_sys_fsetxattr fs/xattr.c:761 [inline]
__se_sys_fsetxattr fs/xattr.c:758 [inline]
__arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879
el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
[
---truncated--- |
| Inefficient regular expression complexity in certain Zoom Workplace Clients before version 6.5.10 may allow an unauthenticated user to conduct an escalation of privilege via network access. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reject VHT opmode for unsupported channel widths
VHT operating mode notifications are not defined for channel widths
below 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the
VHT specification and must be rejected.
Without this check, malformed notifications using these widths may
reach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to
invalid input. This issue was reported by syzbot.
Reject these unsupported widths early in sta_link_apply_parameters()
when opmode_notif is used. The accepted set includes 20, 40, 80, 160,
and 80+80 MHz, which are valid for VHT. While 320 MHz is not defined
for VHT, it is allowed to avoid rejecting HE or EHT clients that may
still send a VHT opmode notification. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation
When using Secure TSC, the GUEST_TSC_FREQ MSR reports a frequency based on
the nominal P0 frequency, which deviates slightly (typically ~0.2%) from
the actual mean TSC frequency due to clocking parameters.
Over extended VM uptime, this discrepancy accumulates, causing clock skew
between the hypervisor and a SEV-SNP VM, leading to early timer interrupts as
perceived by the guest.
The guest kernel relies on the reported nominal frequency for TSC-based
timekeeping, while the actual frequency set during SNP_LAUNCH_START may
differ. This mismatch results in inaccurate time calculations, causing the
guest to perceive hrtimers as firing earlier than expected.
Utilize the TSC_FACTOR from the SEV firmware's secrets page (see "Secrets
Page Format" in the SNP Firmware ABI Specification) to calculate the mean
TSC frequency, ensuring accurate timekeeping and mitigating clock skew in
SEV-SNP VMs.
Use early_ioremap_encrypted() to map the secrets page as
ioremap_encrypted() uses kmalloc() which is not available during early TSC
initialization and causes a panic.
[ bp: Drop the silly dummy var:
https://lore.kernel.org/r/20250630192726.GBaGLlHl84xIopx4Pt@fat_crate.local ] |
