| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when uninstalling driver
When the driver is uninstalled and the VF is disabled concurrently, a
kernel crash occurs. The reason is that the two actions call function
pci_disable_sriov(). The num_VFs is checked to determine whether to
release the corresponding resources. During the second calling, num_VFs
is not 0 and the resource release function is called. However, the
corresponding resource has been released during the first invoking.
Therefore, the problem occurs:
[15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[15278.131557][T50670] Call trace:
[15278.134686][T50670] klist_put+0x28/0x12c
[15278.138682][T50670] klist_del+0x14/0x20
[15278.142592][T50670] device_del+0xbc/0x3c0
[15278.146676][T50670] pci_remove_bus_device+0x84/0x120
[15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80
[15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c
[15278.162485][T50670] sriov_disable+0x50/0x11c
[15278.166829][T50670] pci_disable_sriov+0x24/0x30
[15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3]
[15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge]
[15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230
[15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30
[15278.193848][T50670] invoke_syscall+0x50/0x11c
[15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164
[15278.203837][T50670] do_el0_svc+0x34/0xcc
[15278.207834][T50670] el0_svc+0x20/0x30
For details, see the following figure.
rmmod hclge disable VFs
----------------------------------------------------
hclge_exit() sriov_numvfs_store()
... device_lock()
pci_disable_sriov() hns3_pci_sriov_configure()
pci_disable_sriov()
sriov_disable()
sriov_disable() if !num_VFs :
if !num_VFs : return;
return; sriov_del_vfs()
sriov_del_vfs() ...
... klist_put()
klist_put() ...
... num_VFs = 0;
num_VFs = 0; device_unlock();
In this patch, when driver is removing, we get the device_lock()
to protect num_VFs, just like sriov_numvfs_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix missing locking causing hanging calls
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: do not leave a dangling sk pointer in __smc_create()
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:
smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_create net/socket.c:1616 [inline]
__sys_socket_create net/socket.c:1653 [inline]
__sys_socket+0x150/0x3c0 net/socket.c:1700
__do_sys_socket net/socket.c:1714 [inline]
__se_sys_socket net/socket.c:1712 [inline]
For reference, see commit 2d859aff775d ("Merge branch
'do-not-leave-dangling-sk-pointers-in-pf-create-functions'") |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: stm32: spdifrx: fix dma channel release in stm32_spdifrx_remove
In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not
null. So the release of the dma channel leads to the following issue:
[ 4.879000] st,stm32-spdifrx 500d0000.audio-controller:
dma_request_slave_channel error -19
[ 4.888975] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000003d
[...]
[ 5.096577] Call trace:
[ 5.099099] dma_release_channel+0x24/0x100
[ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx]
[ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx]
To avoid this issue, release channel only if the pointer is valid. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: add missing buffer index check
dvb_vb2_expbuf() didn't check if the given buffer index was
for a valid buffer. Add this check. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx24116: prevent overflows on SNR calculus
as reported by Coverity, if reading SNR registers fail, a negative
number will be returned, causing an underflow when reading SNR
registers.
Prevent that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: fix buffer overwrite when using > 32 buffers
The maximum number of buffers that can be requested was increased to
64 for the video capture queue. But video capture used a must_blank
array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an
out-of-bounds write when using buffer indices >= 32.
Create a new define MAX_VID_CAP_BUFFERS that is used to access the
must_blank array and set max_num_buffers for the video capture queue.
This solves a crash reported by:
https://bugzilla.kernel.org/show_bug.cgi?id=219258 |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-tpg: prevent the risk of a division by zero
As reported by Coverity, the logic at tpg_precalculate_line()
blindly rescales the buffer even when scaled_witdh is equal to
zero. If this ever happens, this will cause a division by zero.
Instead, add a WARN_ON_ONCE() to trigger such cases and return
without doing any precalculation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: check outstanding simultaneous SMB operations
If Client send simultaneous SMB operations to ksmbd, It exhausts too much
memory through the "ksmbd_work_cache”. It will cause OOM issue.
ksmbd has a credit mechanism but it can't handle this problem. This patch
add the check if it exceeds max credits to prevent this problem by assuming
that one smb request consumes at least one credit. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix the missing xa_store error check
xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot
be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed,
so check error for xa_store() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
When sealing or unsealing a key blob we currently do not wait for
the AEAD cipher operation to finish and simply return after submitting
the request. If there is some load on the system we can exit before
the cipher operation is done and the buffer we read from/write to
is already removed from the stack. This will e.g. result in NULL
pointer dereference errors in the DCP driver during blob creation.
Fix this by waiting for the AEAD cipher operation to finish before
resuming the seal and unseal calls. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix out-of-bounds access to the dirty bitset when resizing
dm-cache checks the dirty bits of the cache blocks to be dropped when
shrinking the fast device, but an index bug in bitset iteration causes
out-of-bounds access.
Reproduce steps:
1. create a cache device of 1024 cache blocks (128 bytes dirty bitset)
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. shrink the fast device to 512 cache blocks, triggering out-of-bounds
access to the dirty bitset (offset 0x80)
dmsetup suspend cache
dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0
Read of size 8 at addr ffffc900000f3080 by task dmsetup/131
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc900000f3000, ffffc900000f5000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by making the index post-incremented. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix potential out-of-bounds access on the first resume
Out-of-bounds access occurs if the fast device is expanded unexpectedly
before the first-time resume of the cache table. This happens because
expanding the fast device requires reloading the cache table for
cache_create to allocate new in-core data structures that fit the new
size, and the check in cache_preresume is not performed during the
first resume, leading to the issue.
Reproduce steps:
1. prepare component devices:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
2. load a cache table of 512 cache blocks, and deliberately expand the
fast device before resuming the cache, making the in-core data
structures inadequate.
dmsetup create cache --notable
dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
3. suspend the cache to write out the in-core dirty bitset and hint
array, leading to out-of-bounds access to the dirty bitset at offset
0x40:
dmsetup suspend cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80
Read of size 8 at addr ffffc90000085040 by task dmsetup/90
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc90000085000, ffffc90000087000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by checking the size change on the first resume. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix a crash if blk_alloc_disk fails
If blk_alloc_disk fails, the variable md->disk is set to an error value.
cleanup_mapped_device will see that md->disk is non-NULL and it will
attempt to access it, causing a crash on this statement
"md->disk->private_data = NULL;". |
| In the Linux kernel, the following vulnerability has been resolved:
net: vertexcom: mse102x: Fix possible double free of TX skb
The scope of the TX skb is wider than just mse102x_tx_frame_spi(),
so in case the TX skb room needs to be expanded, we should free the
the temporary skb instead of the original skb. Otherwise the original
TX skb pointer would be freed again in mse102x_tx_work(), which leads
to crashes:
Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP
CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23
Hardware name: chargebyte Charge SOM DC-ONE (DT)
Workqueue: events mse102x_tx_work [mse102x]
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_release_data+0xb8/0x1d8
lr : skb_release_data+0x1ac/0x1d8
sp : ffff8000819a3cc0
x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0
x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff
x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50
x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc
x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000
x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000
x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8
x8 : fffffc00001bc008
x7 : 0000000000000000 x6 : 0000000000000008
x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009
x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
skb_release_data+0xb8/0x1d8
kfree_skb_reason+0x48/0xb0
mse102x_tx_work+0x164/0x35c [mse102x]
process_one_work+0x138/0x260
worker_thread+0x32c/0x438
kthread+0x118/0x11c
ret_from_fork+0x10/0x20
Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660) |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: avoid vport access in idpf_get_link_ksettings
When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.
To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reinitialize delayed ref list after deleting it from the list
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: restore the override_rlimit logic
Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
damon_feed_loop_next_input() is inefficient and fragile to overflows.
Specifically, 'score_goal_diff_bp' calculation can overflow when 'score'
is high. The calculation is actually unnecessary at all because 'goal' is
a constant of value 10,000. Calculation of 'compensation' is again
fragile to overflow. Final calculation of return value for under-achiving
case is again fragile to overflow when the current score is
under-achieving the target.
Add two corner cases handling at the beginning of the function to make the
body easier to read, and rewrite the body of the function to avoid
overflows and the unnecessary bp value calcuation. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: sunxi: Fix accessing an released usb phy
Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit(). |
