| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in SIMATIC PCS neo V4.1 (All versions), SIMATIC PCS neo V5.0 (All versions), SIMATIC PCS neo V6.0 (All versions < V6.0 SP1 Update 1), User Management Component (UMC) (All versions < V2.15.1.3). Affected products contain a out-of-bounds read vulnerability in the integrated UMC component. This could allow an unauthenticated remote attacker to cause a denial of service condition. |
| A vulnerability has been identified in SIMATIC PCS neo V4.1 (All versions), SIMATIC PCS neo V5.0 (All versions), SIMATIC PCS neo V6.0 (All versions < V6.0 SP1 Update 1), User Management Component (UMC) (All versions < V2.15.1.3). Affected products contain a out-of-bounds read vulnerability in the integrated UMC component. This could allow an unauthenticated remote attacker to cause a denial of service condition. |
| A vulnerability has been identified in SIMATIC PCS neo V4.1 (All versions), SIMATIC PCS neo V5.0 (All versions), SIMATIC PCS neo V6.0 (All versions < V6.0 SP1 Update 1), User Management Component (UMC) (All versions < V2.15.1.3). Affected products contain a out-of-bounds read vulnerability in the integrated UMC component. This could allow an unauthenticated remote attacker to cause a denial of service condition. |
| A vulnerability has been identified in SIMATIC PCS neo V4.1 (All versions), SIMATIC PCS neo V5.0 (All versions), SIMATIC PCS neo V6.0 (All versions < V6.0 SP1 Update 1), SIMATIC S7-PLCSIM V17 (All versions), SIMATIC STEP 7 V17 (All versions < V17 Update 9), SIMATIC STEP 7 V18 (All versions), SIMATIC STEP 7 V19 (All versions < V19 Update 4), SIMATIC STEP 7 V20 (All versions < V20 Update 4), SIMATIC WinCC V17 (All versions < V17 Update 9), SIMATIC WinCC V18 (All versions), SIMATIC WinCC V19 (All versions < V19 Update 4), SIMATIC WinCC V20 (All versions < V20 Update 4), SIMOCODE ES V17 (All versions), SIMOCODE ES V18 (All versions), SIMOCODE ES V19 (All versions), SIMOCODE ES V20 (All versions), SIMOTION SCOUT TIA V5.4 (All versions), SIMOTION SCOUT TIA V5.5 (All versions), SIMOTION SCOUT TIA V5.6 (All versions < V5.6 SP1 HF7), SIMOTION SCOUT TIA V5.7 (All versions), SINAMICS Startdrive V17 (All versions), SINAMICS Startdrive V18 (All versions), SINAMICS Startdrive V19 (All versions), SINAMICS Startdrive V20 (All versions), SIRIUS Safety ES V17 (TIA Portal) (All versions), SIRIUS Safety ES V18 (TIA Portal) (All versions), SIRIUS Safety ES V19 (TIA Portal) (All versions), SIRIUS Safety ES V20 (TIA Portal) (All versions), SIRIUS Soft Starter ES V17 (TIA Portal) (All versions), SIRIUS Soft Starter ES V18 (TIA Portal) (All versions), SIRIUS Soft Starter ES V19 (TIA Portal) (All versions), SIRIUS Soft Starter ES V20 (TIA Portal) (All versions), TIA Portal Cloud V17 (All versions), TIA Portal Cloud V18 (All versions), TIA Portal Cloud V19 (All versions < V5.2.1.1), TIA Portal Cloud V20 (All versions < V5.2.2.2), TIA Portal Test Suite V20 (All versions < V20 Update 4). Affected products do not properly sanitize Interprocess Communication input received through a Windows Named Pipe accessible to all local users. This could allow an authenticated local attacker to cause a type confusion and execute arbitrary code within the affected application. |
| ## Summary
The iOS implementation of `cordova-plugin-inappbrowser` passes the `id` field from a `WKScriptMessage` body to `commandDelegate sendPluginResult:callbackId:` with no format validation (`CDVWKInAppBrowser.m:560–574`). Any web content loaded inside the InAppBrowser can fire any pending Cordova callback in the host app by posting a message whose `id` field is a guessable or enumerated callback identifier. An attack abusing this weakness must be tailored to the specific plugins and callback IDs the host app uses. Though an attacker with knowledge of common Cordova plugin configurations could craft reusable payloads targeting widely-adopted plugins.
## Impact
An unauthenticated remote attacker who controls content displayed in the InAppBrowser — via a URL the app opens (OAuth redirect, marketing link, deep-link target) or a network interception — can call `window.webkit.messageHandlers.cordova_iab.postMessage({id: '<victim-callback-id>', d: '...'})` to fire callbacks belonging to any other installed Cordova plugin (Camera, Contacts, File, Geolocation). Cordova callback IDs follow the predictable format `<PluginName><sequential-integer>`, making enumeration feasible. Successful exploitation allows the attacker to spoof plugin results across trust boundaries — for example, injecting a forged camera approval, a fabricated contacts list, or a crafted file-read response.
This issue affects Cordova Plugin InAppBrowser: from 3.1.0 through 6.0.0.
Users are recommended to upgrade to version 6.0.1, which fixes the issue. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory.
By creating resources of certain types and presenting a set of parameters to the affected interface the exploit can be used to corrupt kernel memory. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to cause mismanagement of a mapping state maintained for a sparse memory allocation.
The product accidentally refers to the wrong memory due to the semantics of how math operations are implicitly scaled across buffers of different sizes. |
| A high-severity vulnerability in the deployment of Genetec RabbitMQ that allows a privilege escalation attack. |
| SAP NetWeaver Application Server ABAP and ABAP Platform allows an authenticated attacker with normal privileges to obtain a valid signed message and send modified signed XML documents to the verifier. This may result in acceptance of tampered identity information, unauthorized access to sensitive user data and potential disruption of normal system usage. |
| Stack buffer overflow in Skia in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to potentially exploit stack corruption via a crafted HTML page. (Chromium security severity: Medium) |
| Integer overflow in Skia in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
Add validation in xe_vm_madvise_ioctl() to reject PAT indices with
XE_COH_NONE coherency mode when applied to CPU cached memory.
Using coh_none with CPU cached buffers is a security issue. When the
kernel clears pages before reallocation, the clear operation stays in
CPU cache (dirty). GPU with coh_none can bypass CPU caches and read
stale sensitive data directly from DRAM, potentially leaking data from
previously freed pages of other processes.
This aligns with the existing validation in vm_bind path
(xe_vm_bind_ioctl_validate_bo).
v2(Matthew brost)
- Add fixes
- Move one debug print to better place
v3(Matthew Auld)
- Should be drm/xe/uapi
- More Cc
v4(Shuicheng Lin)
- Fix kmem leak issues by the way
v5
- Remove kmem leak because it has been merged by another patch
v6
- Remove the fix which is not related to current fix
v7
- No change
v8
- Rebase
v9
- Limit the restrictions to iGPU
v10
- No change
(cherry picked from commit 016ccdb674b8c899940b3944952c96a6a490d10a) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/alloc_tag: clear codetag for pages allocated before page_ext initialization
Due to initialization ordering, page_ext is allocated and initialized
relatively late during boot. Some pages have already been allocated and
freed before page_ext becomes available, leaving their codetag
uninitialized.
A clear example is in init_section_page_ext(): alloc_page_ext() calls
kmemleak_alloc(). If the slab cache has no free objects, it falls back to
the buddy allocator to allocate memory. However, at this point page_ext
is not yet fully initialized, so these newly allocated pages have no
codetag set. These pages may later be reclaimed by KASAN, which causes
the warning to trigger when they are freed because their codetag ref is
still empty.
Use a global array to track pages allocated before page_ext is fully
initialized. The array size is fixed at 8192 entries, and will emit a
warning if this limit is exceeded. When page_ext initialization
completes, set their codetag to empty to avoid warnings when they are
freed later.
This warning is only observed with CONFIG_MEM_ALLOC_PROFILING_DEBUG=Y and
mem_profiling_compressed disabled:
[ 9.582133] ------------[ cut here ]------------
[ 9.582137] alloc_tag was not set
[ 9.582139] WARNING: ./include/linux/alloc_tag.h:164 at __pgalloc_tag_sub+0x40f/0x550, CPU#5: systemd/1
[ 9.582190] CPU: 5 UID: 0 PID: 1 Comm: systemd Not tainted 7.0.0-rc4 #1 PREEMPT(lazy)
[ 9.582192] Hardware name: Red Hat KVM, BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 9.582194] RIP: 0010:__pgalloc_tag_sub+0x40f/0x550
[ 9.582196] Code: 00 00 4c 29 e5 48 8b 05 1f 88 56 05 48 8d 4c ad 00 48 8d 2c c8 e9 87 fd ff ff 0f 0b 0f 0b e9 f3 fe ff ff 48 8d 3d 61 2f ed 03 <67> 48 0f b9 3a e9 b3 fd ff ff 0f 0b eb e4 e8 5e cd 14 02 4c 89 c7
[ 9.582197] RSP: 0018:ffffc9000001f940 EFLAGS: 00010246
[ 9.582200] RAX: dffffc0000000000 RBX: 1ffff92000003f2b RCX: 1ffff110200d806c
[ 9.582201] RDX: ffff8881006c0360 RSI: 0000000000000004 RDI: ffffffff9bc7b460
[ 9.582202] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff3a62324
[ 9.582203] R10: ffffffff9d311923 R11: 0000000000000000 R12: ffffea0004001b00
[ 9.582204] R13: 0000000000002000 R14: ffffea0000000000 R15: ffff8881006c0360
[ 9.582206] FS: 00007ffbbcf2d940(0000) GS:ffff888450479000(0000) knlGS:0000000000000000
[ 9.582208] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9.582210] CR2: 000055ee3aa260d0 CR3: 0000000148b67005 CR4: 0000000000770ef0
[ 9.582211] PKRU: 55555554
[ 9.582212] Call Trace:
[ 9.582213] <TASK>
[ 9.582214] ? __pfx___pgalloc_tag_sub+0x10/0x10
[ 9.582216] ? check_bytes_and_report+0x68/0x140
[ 9.582219] __free_frozen_pages+0x2e4/0x1150
[ 9.582221] ? __free_slab+0xc2/0x2b0
[ 9.582224] qlist_free_all+0x4c/0xf0
[ 9.582227] kasan_quarantine_reduce+0x15d/0x180
[ 9.582229] __kasan_slab_alloc+0x69/0x90
[ 9.582232] kmem_cache_alloc_noprof+0x14a/0x500
[ 9.582234] do_getname+0x96/0x310
[ 9.582237] do_readlinkat+0x91/0x2f0
[ 9.582239] ? __pfx_do_readlinkat+0x10/0x10
[ 9.582240] ? get_random_bytes_user+0x1df/0x2c0
[ 9.582244] __x64_sys_readlinkat+0x96/0x100
[ 9.582246] do_syscall_64+0xce/0x650
[ 9.582250] ? __x64_sys_getrandom+0x13a/0x1e0
[ 9.582252] ? __pfx___x64_sys_getrandom+0x10/0x10
[ 9.582254] ? do_syscall_64+0x114/0x650
[ 9.582255] ? ksys_read+0xfc/0x1d0
[ 9.582258] ? __pfx_ksys_read+0x10/0x10
[ 9.582260] ? do_syscall_64+0x114/0x650
[ 9.582262] ? do_syscall_64+0x114/0x650
[ 9.582264] ? __pfx_fput_close_sync+0x10/0x10
[ 9.582266] ? file_close_fd_locked+0x178/0x2a0
[ 9.582268] ? __x64_sys_faccessat2+0x96/0x100
[ 9.582269] ? __x64_sys_close+0x7d/0xd0
[ 9.582271] ? do_syscall_64+0x114/0x650
[ 9.582273] ? do_syscall_64+0x114/0x650
[ 9.582275] ? clear_bhb_loop+0x50/0xa0
[ 9.582277] ? clear_bhb_l
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix buffer overflow in vrealloc_node_align()
Commit 4c5d3365882d ("mm/vmalloc: allow to set node and align in
vrealloc") added the ability to force a new allocation if the current
pointer is on the wrong NUMA node, or if an alignment constraint is not
met, even if the user is shrinking the allocation.
On this path (need_realloc), the code allocates a new object of 'size'
bytes and then memcpy()s 'old_size' bytes into it. If the request is to
shrink the object (size < old_size), this results in an out-of-bounds
write on the new buffer.
Fix this by bounding the copy length by the new allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: microchip: mpfs-ccc: fix out of bounds access during output registration
UBSAN reported an out of bounds access during registration of the last
two outputs. This out of bounds access occurs because space is only
allocated in the hws array for two PLLs and the four output dividers
that each has, but the defined IDs contain two DLLS and their two
outputs each, which are not supported by the driver. The ID order is
PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs
by two while adding them to the array to avoid the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: topcliff-pch: fix use-after-free on unbind
Give the driver a chance to flush its queue before releasing the DMA
buffers on driver unbind |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: docg3: fix use-after-free in docg3_release()
In docg3_release(), the docg3 pointer is obtained from
cascade->floors[0]->priv before the loop that calls
doc_release_device() on each floor. doc_release_device() frees the
docg3 struct via kfree(docg3) at line 1881. After the loop,
docg3->cascade->bch dereferences the already-freed pointer.
Fix this by accessing cascade->bch directly, which is equivalent
since docg3->cascade points back to the same cascade struct, and
is already available as a local variable. This also removes the
now-unused docg3 local variable. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix a buffer overflow in ioctl processing
Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the
function retrieve_status:
1. The code in retrieve_status checks that the output string fits into
the output buffer and writes the output string there
2. Then, the code aligns the "outptr" variable to the next 8-byte
boundary:
outptr = align_ptr(outptr);
3. The alignment doesn't check overflow, so outptr could point past the
buffer end
4. The "for" loop is iterated again, it executes:
remaining = len - (outptr - outbuf);
5. If "outptr" points past "outbuf + len", the arithmetics wraps around
and the variable "remaining" contains unusually high number
6. With "remaining" being high, the code writes more data past the end of
the buffer
Luckily, this bug has no security implications because:
1. Only root can issue device mapper ioctls
2. The commonly used libraries that communicate with device mapper
(libdevmapper and devicemapper-rs) use buffer size that is aligned to
8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input
buffer and the bug can't happen accidentally |
| joaquimserafim/json-web-token is a javascript library use to interact with JSON Web Tokens (JWT) which are a compact URL-safe means of representing claims to be transferred between two parties. Versions prior to 4.0.0 are vulnerable to a JWT algorithm confusion attack. On line 86 of the 'index.js' file, the algorithm to use for verifying the signature of the JWT token is taken from the JWT token, which at that point is still unverified and thus shouldn't be trusted. To exploit this vulnerability, an attacker needs to craft a malicious JWT token containing the HS256 algorithm, signed with the public RSA key of the victim application. This attack will only work against this library is the RS256 algorithm is in use, however it is a best practice to use that algorithm. Version 4.0.0 fixes the issue. |
| A DLL hijacking vulnerability in Wassimulator (GitHub) CactusViewer v2.3.0 allows attackers to escalate privileges and execute arbitrary code via a crafted DLL. |
