| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "riscv: Define TASK_SIZE_MAX for __access_ok()"
This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fix runtime constant support for nommu kernels
the `__runtime_fixup_32` function does not handle the case where `val` is
zero correctly (as might occur when patching a nommu kernel and referring
to a physical address below the 4GiB boundary whose upper 32 bits are all
zero) because nothing in the existing logic prevents the code from taking
the `else` branch of both nop-checks and emitting two `nop` instructions.
This leaves random garbage in the register that is supposed to receive the
upper 32 bits of the pointer instead of zero that when combined with the
value for the lower 32 bits yields an invalid pointer and causes a kernel
panic when that pointer is eventually accessed.
The author clearly considered the fact that if the `lui` is converted into
a `nop` that the second instruction needs to be adjusted to become an `li`
instead of an `addi`, hence introducing the `addi_insn_mask` variable, but
didn't follow that logic through fully to the case where the `else` branch
executes. To fix it just adjust the logic to ensure that the second `else`
branch is not taken if the first instruction will be patched to a `nop`. |
| A vulnerability was determined in D-Link DIR-816L 2_06_b09_beta. This issue affects the function soapcgi_main of the file /soap.cgi. This manipulation causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer. |
| An issue in Advanced Plugins ultimateimagetool module for PrestaShop before v.2.2.01, allows a remote attacker to escalate privileges and obtain sensitive information via Improper Access Control. |
| An issue has been discovered in GitLab EE affecting all versions from 18.1 before 18.3.6, 18.4 before 18.4.4, and 18.5 before 18.5.2 that, under certain circumstances, could have allowed an attacker to remove Duo flows of another user. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
[Adjusted commit message. - Paolo] |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Correct signedness in skb remaining space calculation
Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow.
When we send data, if an skb exists at the tail of the write queue, the
kernel will attempt to append the new data to that skb. However, the code
that checks for available space in the skb is flawed:
'''
copy = size_goal - skb->len
'''
The types of the variables involved are:
'''
copy: ssize_t (s64 on 64-bit systems)
size_goal: int
skb->len: unsigned int
'''
Due to C's type promotion rules, the signed size_goal is converted to an
unsigned int to match skb->len before the subtraction. The result is an
unsigned int.
When this unsigned int result is then assigned to the s64 copy variable,
it is zero-extended, preserving its non-negative value. Consequently, copy
is always >= 0.
Assume we are sending 2GB of data and size_goal has been adjusted to a
value smaller than skb->len. The subtraction will result in copy holding a
very large positive integer. In the subsequent logic, this large value is
used to update sk->sk_forward_alloc, which can easily cause it to overflow.
The syzkaller reproducer uses TCP_REPAIR to reliably create this
condition. However, this can also occur in real-world scenarios. The
tcp_bound_to_half_wnd() function can also reduce size_goal to a small
value. This would cause the subsequent tcp_wmem_schedule() to set
sk->sk_forward_alloc to a value close to INT_MAX. Further memory
allocation requests would then cause sk_forward_alloc to wrap around and
become negative.
[1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp()
Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a
potential NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU
syzbot reports that defer/local task_work adding via msg_ring can hit
a request that has been freed:
CPU: 1 UID: 0 PID: 19356 Comm: iou-wrk-19354 Not tainted 6.16.0-rc4-syzkaller-00108-g17bbde2e1716 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
io_req_local_work_add io_uring/io_uring.c:1184 [inline]
__io_req_task_work_add+0x589/0x950 io_uring/io_uring.c:1252
io_msg_remote_post io_uring/msg_ring.c:103 [inline]
io_msg_data_remote io_uring/msg_ring.c:133 [inline]
__io_msg_ring_data+0x820/0xaa0 io_uring/msg_ring.c:151
io_msg_ring_data io_uring/msg_ring.c:173 [inline]
io_msg_ring+0x134/0xa00 io_uring/msg_ring.c:314
__io_issue_sqe+0x17e/0x4b0 io_uring/io_uring.c:1739
io_issue_sqe+0x165/0xfd0 io_uring/io_uring.c:1762
io_wq_submit_work+0x6e9/0xb90 io_uring/io_uring.c:1874
io_worker_handle_work+0x7cd/0x1180 io_uring/io-wq.c:642
io_wq_worker+0x42f/0xeb0 io_uring/io-wq.c:696
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
which is supposed to be safe with how requests are allocated. But msg
ring requests alloc and free on their own, and hence must defer freeing
to a sane time.
Add an rcu_head and use kfree_rcu() in both spots where requests are
freed. Only the one in io_msg_tw_complete() is strictly required as it
has been visible on the other ring, but use it consistently in the other
spot as well.
This should not cause any other issues outside of KASAN rightfully
complaining about it. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.4 before 18.4.4, and 18.5 before 18.5.2 that could have allowed an authenticated user to gain CSRF tokens by exploiting improper input validation in repository references combined with redirect handling weaknesses. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: rtsn: Fix a null pointer dereference in rtsn_probe()
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload()
Add a NULL check for msta->vif before accessing its members to prevent
a kernel panic in AP mode deployment. This also fix the issue reported
in [1].
The crash occurs when this function is triggered before the station is
fully initialized. The call trace shows a page fault at
mt7925_sta_set_decap_offload() due to accessing resources when msta->vif
is NULL.
Fix this by adding an early return if msta->vif is NULL and also check
wcid.sta is ready. This ensures we only proceed with decap offload
configuration when the station's state is properly initialized.
[14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0
[14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G
[14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE
[14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common]
[14739.851985] sp : ffffffc085efb500
[14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158
[14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001
[14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88
[14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000
[14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080
[14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000
[14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0
[14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100
[14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000
[14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8
[14739.926686] Call trace:
[14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211]
[14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211]
[14739.946860] sta_info_move_state+0x1c/0x30 [mac80211]
[14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211]
[14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211]
[14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211]
[14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211]
[14739.975516] genl_family_rcv_msg_doit+0xdc/0x150
[14739.980158] genl_rcv_msg+0x218/0x298
[14739.983830] netlink_rcv_skb+0x64/0x138
[14739.987670] genl_rcv+0x40/0x60
[14739.990816] netlink_unicast+0x314/0x380
[14739.994742] netlink_sendmsg+0x198/0x3f0
[14739.998664] __sock_sendmsg+0x64/0xc0
[14740.002324] ____sys_sendmsg+0x260/0x298
[14740.006242] ___sys_sendmsg+0xb4/0x110 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Acquire references on GEM handles for framebuffers
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af06000 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag |
| Action1 Uncontrolled Search Path Element Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Action1. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the configuration of OpenSSL. The product loads an OpenSSL configuration file from an unsecured location. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-26767. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix potential out-of-bounds page table access during batched unmap
As pointed out by David[1], the batched unmap logic in
try_to_unmap_one() may read past the end of a PTE table when a large
folio's PTE mappings are not fully contained within a single page
table.
While this scenario might be rare, an issue triggerable from userspace
must be fixed regardless of its likelihood. This patch fixes the
out-of-bounds access by refactoring the logic into a new helper,
folio_unmap_pte_batch().
The new helper correctly calculates the safe batch size by capping the
scan at both the VMA and PMD boundaries. To simplify the code, it also
supports partial batching (i.e., any number of pages from 1 up to the
calculated safe maximum), as there is no strong reason to special-case
for fully mapped folios. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
When num_parents is 4, __clk_register() occurs an out-of-bounds
when accessing parent_names member. Use ARRAY_SIZE() instead of
hardcode number here.
BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8
Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59
Hardware name: NXP i.MX95 19X19 board (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x8c/0xcc
print_report+0x398/0x5fc
kasan_report+0xd4/0x114
__asan_report_load8_noabort+0x20/0x2c
__clk_register+0x1844/0x20d8
clk_hw_register+0x44/0x110
__clk_hw_register_mux+0x284/0x3a8
imx95_bc_probe+0x4f4/0xa70 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-bufio: fix sched in atomic context
If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP
is enabled for dm-bufio. However, when bufio tries to evict buffers, there
is a chance to trigger scheduling in spin_lock_bh, the following warning
is hit:
BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
4 locks held by kworker/2:2/123:
#0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970
#1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970
#2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710
#3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 #305 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: dm_bufio_cache do_global_cleanup
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
__might_resched+0x360/0x4e0
do_global_cleanup+0x2f5/0x710
process_one_work+0x7db/0x1970
worker_thread+0x518/0xea0
kthread+0x359/0x690
ret_from_fork+0xf3/0x1b0
ret_from_fork_asm+0x1a/0x30
</TASK>
That can be reproduced by:
veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb
SIZE=$(blockdev --getsz /dev/vda)
dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet"
mount /dev/dm-0 /mnt -o ro
echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes
[read files in /mnt] |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix crash in timerlat_dump_stack()
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix race between cache write completion and ALL_QUEUED being set
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.7 before 18.3.6, 18.4 before 18.4.4, and 18.5 before 18.5.2, that could have allowed a blocked user to access sensitive information by establishing GraphQL subscriptions through WebSocket connections. |
