| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use-after-free vulnerability was found in the siano smsusb module in the Linux kernel. The bug occurs during device initialization when the siano device is plugged in. This flaw allows a local user to crash the system, causing a denial of service condition. |
| An issue was discovered in the GPU driver in Samsung Mobile Processor Exynos 1480, 2400, 1580, 2500. There is a use-after-free in the Xclipse GPU Driver. |
| An issue was discovered in the GPU in Samsung Mobile Processor and Wearable Processor Exynos 1280, 2200, 1330, 1380, 1480, 2400. A Use-After-Free leads to privilege escalation. |
| The use-after-free vulnerability was found in the AuthentIC driver in OpenSC packages, occuring in the card enrolment process using pkcs15-init when a user or administrator enrols or modifies cards. An attacker must have physical access to the computer system and requires a crafted USB device or smart card to present the system with specially crafted responses to the APDUs, which are considered high complexity and low severity. This manipulation can allow for compromised card management operations during enrolment. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: avoid putting the realm twice when decoding snaps fails
When decoding the snaps fails it maybe leaving the 'first_realm'
and 'realm' pointing to the same snaprealm memory. And then it'll
put it twice and could cause random use-after-free, BUG_ON, etc
issues. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: take paired job reference
For paired jobs, have the fragment job take a reference on the
geometry job, so that the geometry job cannot be freed until
the fragment job has finished with it.
The geometry job structure is accessed when the fragment job is being
prepared by the GPU scheduler. Taking the reference prevents the
geometry job being freed until the fragment job no longer requires it.
Fixes a use after free bug detected by KASAN:
[ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr]
[ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF in decryption with multichannel
After commit f7025d861694 ("smb: client: allocate crypto only for
primary server") and commit b0abcd65ec54 ("smb: client: fix UAF in
async decryption"), the channels started reusing AEAD TFM from primary
channel to perform synchronous decryption, but that can't done as
there could be multiple cifsd threads (one per channel) simultaneously
accessing it to perform decryption.
This fixes the following KASAN splat when running fstest generic/249
with 'vers=3.1.1,multichannel,max_channels=4,seal' against Windows
Server 2022:
BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xba/0x110
Read of size 8 at addr ffff8881046c18a0 by task cifsd/986
CPU: 3 UID: 0 PID: 986 Comm: cifsd Not tainted 6.15.0-rc1 #1
PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41
04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
print_report+0x156/0x528
? gf128mul_4k_lle+0xba/0x110
? __virt_addr_valid+0x145/0x300
? __phys_addr+0x46/0x90
? gf128mul_4k_lle+0xba/0x110
kasan_report+0xdf/0x1a0
? gf128mul_4k_lle+0xba/0x110
gf128mul_4k_lle+0xba/0x110
ghash_update+0x189/0x210
shash_ahash_update+0x295/0x370
? __pfx_shash_ahash_update+0x10/0x10
? __pfx_shash_ahash_update+0x10/0x10
? __pfx_extract_iter_to_sg+0x10/0x10
? ___kmalloc_large_node+0x10e/0x180
? __asan_memset+0x23/0x50
crypto_ahash_update+0x3c/0xc0
gcm_hash_assoc_remain_continue+0x93/0xc0
crypt_message+0xe09/0xec0 [cifs]
? __pfx_crypt_message+0x10/0x10 [cifs]
? _raw_spin_unlock+0x23/0x40
? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs]
decrypt_raw_data+0x229/0x380 [cifs]
? __pfx_decrypt_raw_data+0x10/0x10 [cifs]
? __pfx_cifs_read_iter_from_socket+0x10/0x10 [cifs]
smb3_receive_transform+0x837/0xc80 [cifs]
? __pfx_smb3_receive_transform+0x10/0x10 [cifs]
? __pfx___might_resched+0x10/0x10
? __pfx_smb3_is_transform_hdr+0x10/0x10 [cifs]
cifs_demultiplex_thread+0x692/0x1570 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? rcu_lockdep_current_cpu_online+0x62/0xb0
? find_held_lock+0x32/0x90
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xd/0xd0
? trace_irq_enable.constprop.0+0xa8/0xe0
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0x1fe/0x380
? kthread+0x10f/0x380
? __pfx_kthread+0x10/0x10
? local_clock_noinstr+0xd/0xd0
? ret_from_fork+0x1b/0x60
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
? rcu_is_watching+0x20/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Fix a UAF vulnerability in class handling
This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class
handling. The issue occurs due to a time-of-check/time-of-use condition
in hfsc_change_class() when working with certain child qdiscs like netem
or codel.
The vulnerability works as follows:
1. hfsc_change_class() checks if a class has packets (q.qlen != 0)
2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g.,
codel, netem) might drop packets and empty the queue
3. The code continues assuming the queue is still non-empty, adding
the class to vttree
4. This breaks HFSC scheduler assumptions that only non-empty classes
are in vttree
5. Later, when the class is destroyed, this can lead to a Use-After-Free
The fix adds a second queue length check after qdisc_peek_len() to verify
the queue wasn't emptied. |
| A use-after-free vulnerability was found in the cxgb4 driver in the Linux kernel. The bug occurs when the cxgb4 device is detaching due to a possible rearming of the flower_stats_timer from the work queue. This flaw allows a local user to crash the system, causing a denial of service condition. |
| A use-after-free flaw was found in vcs_read in drivers/tty/vt/vc_screen.c in vc_screen in the Linux Kernel. This issue may allow an attacker with local user access to cause a system crash or leak internal kernel information. |
| A use-after-free flaw was found in vmxnet3_rq_alloc_rx_buf in drivers/net/vmxnet3/vmxnet3_drv.c in VMware's vmxnet3 ethernet NIC driver in the Linux Kernel. This issue could allow a local attacker to crash the system due to a double-free while cleaning up vmxnet3_rq_cleanup_all, which could also lead to a kernel information leak problem. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: detect and prevent references to a freed transport in sendmsg
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]). |
| Kitware VTK (Visualization Toolkit) through 9.5.0 contains a heap use-after-free vulnerability in vtkGLTFDocumentLoader. The vulnerability manifests during mesh object copy operations where vector members are accessed after the underlying memory has been freed, specifically when handling GLTF files with corrupted or invalid mesh reference structures. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix __dst_negative_advice() race
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets. |
| NetSurf 3.11 is vulnerable to Use After Free in dom_node_set_text_content function. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix off-by-one error in do_split
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| Poppler is a PDF rendering library. Versions prior to 25.06.0 use `std::atomic_int` for reference counting. Because `std::atomic_int` is only 32 bits, it is possible to overflow the reference count and trigger a use-after-free. Version 25.06.0 patches the issue. |
| Ashlar-Vellum Cobalt CO File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ashlar-Vellum Cobalt. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of CO files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26631. |
| Adobe Acrobat Reader versions 23.006.20360 (and earlier) and 20.005.30524 (and earlier) are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in macOS Ventura 13.6.3, macOS Sonoma 14.2, macOS Monterey 12.7.2. A local attacker may be able to elevate their privileges. |
