batman-adv: tp_meter: directly shut down timer on cleanup

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone

batman-adv: tt: fix TOCTOU race for reported vlans

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix TOCTOU race for reported vlans The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty.

fastschema - TOCTOU Race Condition Bypasses OTP Attempt Limit in Account Recovery

A time-of-check/time-of-use (TOCTOU) race condition in fastschema through v0.15.1 allows an unauthenticated remote attacker to bypass the OTP attempt limit on the account recovery flow, enabling brute-force attacks on 6-digit OTP codes.

Time-of-Check to Time-of-Use Race Condition in ACAP Framework Enables Privilege Escalation on Axis OS

The ACAP framework contains a Time-of-Check to Time-of-Use (TOCTOU) race condition, which could potentially lead to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application.

Time-of-check time-of-use race condition in the BIOS firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access.

watchdog: airoha: Prevent division by zero when clock frequency is zero

In the Linux kernel, the following vulnerability has been resolved: watchdog: airoha: Prevent division by zero when clock frequency is zero clk_get_rate() can return 0 when the clock provider is not properly configured or the clock is unmanaged. The driver uses wdt_freq as a divisor directly in airoha_wdt_probe() to compute max_timeout and in airoha_wdt_get_timeleft() to compute the remaining time, which results in a division by zero. Add a check for wdt_freq == 0 in probe and return -EINVAL with dev_err_probe() to prevent the division by zero and provide a diagnostic message.

kernel: NFSD: Defer sub-object cleanup in export put callbacks

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

kernel: f2fs: fix node_cnt race between extent node destroy and writeback

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Authenticated Denial-of-Service in HTTPD Service in TP-Link Archer A6

A denial-of-service vulnerability exists in httpd service on Archer A6 v4 where the asynchronous systool instruction handlng path in httpd does not properly synchronize or safely manage concurrent systool operations.  By sending crafted systool instructions through the asynchronous request path, successful exploitation may cause the httpd process or device management service to crash and may result in temporary loss of access to the web management interface or device reboot.

Windows Kernel Security Feature Bypass Vulnerability

Windows Kernel Security Feature Bypass Vulnerability

Windows AppX Deployment Extensions Elevation of Privilege Vulnerability

Windows AppX Deployment Extensions Elevation of Privilege Vulnerability

Windows Kernel Elevation of Privilege Vulnerability

Windows Kernel Elevation of Privilege Vulnerability

sched_ext: Preserve rq tracking across local DSQ dispatch

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Preserve rq tracking across local DSQ dispatch dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while ops.dispatch() has recorded the current rq. Moving a task to a local DSQ may switch to the source or destination rq before synchronously invoking ops.dequeue() through the following path: SCX_CALL_OP(dispatch, rq) ops.dispatch() scx_bpf_dsq_move_to_local() scx_flush_dispatch_buf() finish_dispatch() dispatch_to_local_dsq() scx_dispatch_enqueue() local_dsq_post_enq() call_task_dequeue() SCX_CALL_OP_TASK(dequeue, locked_rq, ...) The nested callback saves the recorded rq and restores it on return. If the rq tracking does not follow the lock switch, update_locked_rq() can trigger the following lockdep assertion while restoring an rq which is no longer held: WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170 Call Trace: scx_dispatch_enqueue+0x2b0/0x460 dispatch_to_local_dsq+0x138/0x230 scx_flush_dispatch_buf+0x1af/0x220 scx_bpf_dsq_move_to_local___v2+0xe2/0x1c0 bpf__sched_ext_ops_dispatch+0x4b/0xa7 do_pick_task_scx+0x3b6/0x910 __pick_next_task+0x105/0x1f0 __schedule+0x3e7/0x1980 Introduce switch_rq_lock() to update the tracking state together with each rq lock handoff. Use it in dispatch_to_local_dsq(), move_remote_task_to_local_dsq() and the in-balance paths of scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the rq whose lock is actually held throughout the lock dance.

fuse-uring: fix race between registration and connection abortion

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix race between registration and connection abortion This fixes this race: - thread a: io_uring_enter -> register sqe -> fuse_uring_create_ring_ent -> allocate ent but doesn't grab queue_ref yet - thread b: fuse_conn_destroy() -> fuse_chan_abort() -> fuse_uring_abort() is a no-op due to queue ref being 0 - thread a: grabs the queue_ref, queue_ref is now 1, rest of fuse_uring_do_register() logic executes - thread b: fuse_chan_abort() returns, fuse_chan_wait_aborted() now runs and calls "wait_event(ring->stop_waitq, atomic_read(&ring->queue_refs) == 0);" The abort/unmount thread will hang indefinitely in unkillable state as nothing will decrement queue_refs or wake stop_waitq, and the ring, queue, and ent are leaked. Fix this by checking fch->connected under fch->lock after the created ent has grabbed a ref count on the queue. This ensures that in the scenario above, it is guaranteed that we either release the queue ref and wake up stop_waitq (in case fuse_chan_wait_aborted() is already waiting) in fuse_uring_do_register() when we detect !fch->connected, or if the connection is aborted after the check, it is guaranteed that the async teardown worker will be running in the background cleaning up ents and decrementing the ent's ref on the queue, which will unblock the eventual queue and ring teardown.

Kata guest escape: runtime-rs guest-root to host-root escape via virtiofs

Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Prior to 3.31.0, the runtime-rs standalone virtio-fs path is vulnerable to a guest-root to host-root escape. In this configuration, Kata runs the host virtiofsd as root with --sandbox none --seccomp none, so an attacker with root-equivalent access inside the guest can bypass the guest virtio-fs client entirely by taking over the virtio-fs PCI device and building a virtqueue in userspace to submit raw FUSE requests directly to the host virtiofsd. A crafted FUSE_SYMLINK request whose new symlink name is an absolute host path is honored outside the configured shared directory, allowing guest root to create root-owned symlinks in sensitive host locations such as /etc/cron.d. By pointing such a symlink at a guest-controlled crontab payload reachable through a live runtime process's mount namespace, the attacker causes the host cron daemon to execute that payload as host root, crossing the Kata isolation boundary. This issue is fixed in version 3.31.0.

Memos Webhook DNS Rebinding TOCTOU SSRF in safeDialContext()

Memos' webhook dispatch function safeDialContext (internal/webhook/webhook.go) resolves the target hostname via net.DefaultResolver.LookupHost and validates the resulting IPs against reserved ranges, but then dials net.JoinHostPort(host, port) using the original hostname rather than the already-validated IP address.

mealie - DNS-Rebinding TOCTOU in SSRF Guard Allows Internal Network and Cloud Metadata Access

Mealie's AsyncSafeTransport SSRF guard (mealie/pkgs/safehttp/transport.py) resolves a target hostname once, checks the resolved IP against private-range rules, but then issues the actual outbound HTTP request using the original hostname, which the underlying async transport re-resolves independently.

fuse-uring: fix data races on ring->ready

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix data races on ring->ready On weakly-ordered architectures, the store to fiq->ops can be reordered past the store to ring->ready, allowing a CPU that sees ring->ready == true via fuse_uring_ready() to dispatch requests through a stale fiq->ops pointer. Upgrade the store to smp_store_release() and the load in fuse_uring_ready() to smp_load_acquire() so that the preceding WRITE_ONCE(fiq->ops, ...) is visible to any CPU that observes ring->ready == true. Additionally, fuse_uring_do_register() publishes ring->ready with WRITE_ONCE() but the fast-path check reads it with a plain load. This is a marked-vs-unmarked access that KCSAN will flag. Wrap it in READ_ONCE() to mark it without adding unnecessary ordering. Also wrap the fc->ring load in fuse_uring_ready() in READ_ONCE() to prevent the compiler from reloading it between the NULL check and the dereference.

net: ethernet: arc: emac: quiesce interrupts before requesting IRQ

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: arc: emac: quiesce interrupts before requesting IRQ Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe should not see interrupt delivery in the usual case. However, hardware may still present stale or latched interrupt status left by firmware or the bootloader. If probe later unwinds after devm_request_irq() has installed the handler, such a stale interrupt can still reach arc_emac_intr() during teardown and race with release of the associated net_device. Avoid that window by putting the device into a known quiescent state before requesting the IRQ: disable all EMAC interrupt sources and clear any pending EMAC interrupt status bits. This keeps the change hardware-focused and minimal, while preventing spurious IRQ delivery from leftover state.

chromium-browser: Google Chrome: OS-level privilege escalation due to a race condition via a malicious file

Race in CredentialProvider in Google Chrome on Windows prior to 151.0.7922.109 allowed a local attacker to perform OS-level privilege escalation via a malicious file. (Chromium security severity: High)