| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when uninstalling driver
When the driver is uninstalled and the VF is disabled concurrently, a
kernel crash occurs. The reason is that the two actions call function
pci_disable_sriov(). The num_VFs is checked to determine whether to
release the corresponding resources. During the second calling, num_VFs
is not 0 and the resource release function is called. However, the
corresponding resource has been released during the first invoking.
Therefore, the problem occurs:
[15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[15278.131557][T50670] Call trace:
[15278.134686][T50670] klist_put+0x28/0x12c
[15278.138682][T50670] klist_del+0x14/0x20
[15278.142592][T50670] device_del+0xbc/0x3c0
[15278.146676][T50670] pci_remove_bus_device+0x84/0x120
[15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80
[15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c
[15278.162485][T50670] sriov_disable+0x50/0x11c
[15278.166829][T50670] pci_disable_sriov+0x24/0x30
[15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3]
[15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge]
[15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230
[15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30
[15278.193848][T50670] invoke_syscall+0x50/0x11c
[15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164
[15278.203837][T50670] do_el0_svc+0x34/0xcc
[15278.207834][T50670] el0_svc+0x20/0x30
For details, see the following figure.
rmmod hclge disable VFs
----------------------------------------------------
hclge_exit() sriov_numvfs_store()
... device_lock()
pci_disable_sriov() hns3_pci_sriov_configure()
pci_disable_sriov()
sriov_disable()
sriov_disable() if !num_VFs :
if !num_VFs : return;
return; sriov_del_vfs()
sriov_del_vfs() ...
... klist_put()
klist_put() ...
... num_VFs = 0;
num_VFs = 0; device_unlock();
In this patch, when driver is removing, we get the device_lock()
to protect num_VFs, just like sriov_numvfs_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: stm32: spdifrx: fix dma channel release in stm32_spdifrx_remove
In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not
null. So the release of the dma channel leads to the following issue:
[ 4.879000] st,stm32-spdifrx 500d0000.audio-controller:
dma_request_slave_channel error -19
[ 4.888975] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000003d
[...]
[ 5.096577] Call trace:
[ 5.099099] dma_release_channel+0x24/0x100
[ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx]
[ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx]
To avoid this issue, release channel only if the pointer is valid. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove():
[ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12
[ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry
[ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004
[...]
[ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[...]
[ 57.331328] Call Trace:
[ 57.331477] <TASK>
[...]
[ 57.333511] ? do_user_addr_fault+0x3e5/0x740
[ 57.333778] ? exc_page_fault+0x70/0x170
[ 57.334016] ? asm_exc_page_fault+0x2b/0x30
[ 57.334263] ? __pfx_ocfs2_xa_block_wipe_namevalue+0x10/0x10
[ 57.334596] ? ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[ 57.334913] ocfs2_xa_remove_entry+0x23/0xc0
[ 57.335164] ocfs2_xa_set+0x704/0xcf0
[ 57.335381] ? _raw_spin_unlock+0x1a/0x40
[ 57.335620] ? ocfs2_inode_cache_unlock+0x16/0x20
[ 57.335915] ? trace_preempt_on+0x1e/0x70
[ 57.336153] ? start_this_handle+0x16c/0x500
[ 57.336410] ? preempt_count_sub+0x50/0x80
[ 57.336656] ? _raw_read_unlock+0x20/0x40
[ 57.336906] ? start_this_handle+0x16c/0x500
[ 57.337162] ocfs2_xattr_block_set+0xa6/0x1e0
[ 57.337424] __ocfs2_xattr_set_handle+0x1fd/0x5d0
[ 57.337706] ? ocfs2_start_trans+0x13d/0x290
[ 57.337971] ocfs2_xattr_set+0xb13/0xfb0
[ 57.338207] ? dput+0x46/0x1c0
[ 57.338393] ocfs2_xattr_trusted_set+0x28/0x30
[ 57.338665] ? ocfs2_xattr_trusted_set+0x28/0x30
[ 57.338948] __vfs_removexattr+0x92/0xc0
[ 57.339182] __vfs_removexattr_locked+0xd5/0x190
[ 57.339456] ? preempt_count_sub+0x50/0x80
[ 57.339705] vfs_removexattr+0x5f/0x100
[...]
Reproducer uses faultinject facility to fail ocfs2_xa_remove() ->
ocfs2_xa_value_truncate() with -ENOMEM.
In this case the comment mentions that we can return 0 if
ocfs2_xa_cleanup_value_truncate() is going to wipe the entry
anyway. But the following 'rc' check is wrong and execution flow do
'ocfs2_xa_remove_entry(loc);' twice:
* 1st: in ocfs2_xa_cleanup_value_truncate();
* 2nd: returning back to ocfs2_xa_remove() instead of going to 'out'.
Fix this by skipping the 2nd removal of the same entry and making
syzkaller repro happy. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
I got a syzbot report without a repro [1] crashing in nf_send_reset6()
I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.
Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.
[1]
skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
eth_header+0x38/0x1f0 net/ethernet/eth.c:83
dev_hard_header include/linux/netdevice.h:3208 [inline]
nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358
nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:277 [inline]
br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424
__netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562
__netif_receive_skb_one_core net/core/dev.c:5666 [inline]
__netif_receive_skb+0x12f/0x650 net/core/dev.c:5781
netif_receive_skb_internal net/core/dev.c:5867 [inline]
netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926
tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550
tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053
new_sync_write fs/read_write.c:590 [inline]
vfs_write+0xa6d/0xc90 fs/read_write.c:683
ksys_write+0x183/0x2b0 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdbeeb7d1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48
RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff
RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8
RBP: 00007fdbeebf12be R08: 0000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline]
hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline]
hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline]
hci_init_sync net/bluetooth/hci_sync.c:4742 [inline]
hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline]
hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994
hci_dev_do_open net/bluetooth/hci_core.c:483 [inline]
hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015
process_one_work kernel/workqueue.c:3267 [inline]
process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348
worker_thread+0x91f/0xe50 kernel/workqueue.c:3429
kthread+0x2cb/0x360 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: veml6030: fix IIO device retrieval from embedded device
The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.
dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.
This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs8409: Fix possible NULL dereference
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then
NULL pointer dereference will occur in the next line.
Since dolphin_fixups function is a hda_fixup function which is not supposed
to return any errors, add simple check before dereference, ignore the fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()
If the allocation in msm_disp_state_dump_regs() failed then
`block->state` can be NULL. The msm_disp_state_print_regs() function
_does_ have code to try to handle it with:
if (*reg)
dump_addr = *reg;
...but since "dump_addr" is initialized to NULL the above is actually
a noop. The code then goes on to dereference `dump_addr`.
Make the function print "Registers not stored" when it sees a NULL to
solve this. Since we're touching the code, fix
msm_disp_state_print_regs() not to pointlessly take a double-pointer
and properly mark the pointer as `const`.
Patchwork: https://patchwork.freedesktop.org/patch/619657/ |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix command bitmask initialization
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx()
build_skb() returns NULL in case of a memory allocation failure so handle
it inside __octep_oq_process_rx() to avoid NULL pointer dereference.
__octep_oq_process_rx() is called during NAPI polling by the driver. If
skb allocation fails, keep on pulling packets out of the Rx DMA queue: we
shouldn't break the polling immediately and thus falsely indicate to the
octep_napi_poll() that the Rx pressure is going down. As there is no
associated skb in this case, don't process the packets and don't push them
up the network stack - they are skipped.
Helper function is implemented to unmmap/flush all the fragment buffers
used by the dropped packet. 'alloc_failures' counter is incremented to
mark the skb allocation error in driver statistics.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Don't crash in stack_top() for tasks without vDSO
Not all tasks have a vDSO mapped, for example kthreads never do. If such
a task ever ends up calling stack_top(), it will derefence the NULL vdso
pointer and crash.
This can for example happen when using kunit:
[<9000000000203874>] stack_top+0x58/0xa8
[<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220
[<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c
[<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c
[<90000000003c2704>] kunit_vm_mmap+0x88/0xc8
[<9000000000410b14>] usercopy_test_init+0xbc/0x25c
[<90000000003c1db4>] kunit_try_run_case+0x5c/0x184
[<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48
[<900000000022e4bc>] kthread+0xc8/0xd4
[<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Guard against bad data for ATIF ACPI method
If a BIOS provides bad data in response to an ATIF method call
this causes a NULL pointer dereference in the caller.
```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```
It has been encountered on at least one system, so guard for it.
(cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could
possibly return NULL pointer. NULL Pointer Dereference may be
triggerred without addtional check.
Add a NULL check for the returned pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: apple: check devm_kasprintf() returned value
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointer before dereferencing se
[WHAT & HOW]
se is null checked previously in the same function, indicating
it might be null; therefore, it must be checked when used again.
This fixes 1 FORWARD_NULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
syzbot has found a NULL pointer dereference bug in fbcon.
Here is the simplified C reproducer:
struct param {
uint8_t type;
struct tiocl_selection ts;
};
int main()
{
struct fb_con2fbmap con2fb;
struct param param;
int fd = open("/dev/fb1", 0, 0);
con2fb.console = 0x19;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
param.type = 2;
param.ts.xs = 0; param.ts.ys = 0;
param.ts.xe = 0; param.ts.ye = 0;
param.ts.sel_mode = 0;
int fd1 = open("/dev/tty1", O_RDWR, 0);
ioctl(fd1, TIOCLINUX, ¶m);
con2fb.console = 1;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
return 0;
}
After calling ioctl(fd1, TIOCLINUX, ¶m), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb)
causes the kernel to follow a different execution path:
set_con2fb_map
-> con2fb_init_display
-> fbcon_set_disp
-> redraw_screen
-> hide_cursor
-> clear_selection
-> highlight
-> invert_screen
-> do_update_region
-> fbcon_putcs
-> ops->putcs
Since ops->putcs is a NULL pointer, this leads to a kernel panic.
To prevent this, we need to call set_blitting_type() within set_con2fb_map()
to properly initialize ops->putcs. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix system hang while resume with TBT monitor
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
(cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85) |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc()
In mlx5e_tir_builder_alloc() kvzalloc() may return NULL
which is dereferenced on the next line in a reference
to the modify field.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
gso: fix udp gso fraglist segmentation after pull from frag_list
Detect gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.
In extreme cases they pull all data into skb linear. For UDP, this
causes a NULL ptr deref in __udpv4_gso_segment_list_csum at
udp_hdr(seg->next)->dest.
Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package()
ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0
ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause
NULL pointer dereference later.
[ rjw: Subject and changelog edits ] |
