| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix race in do_task() when draining
When do_task() exhausts its iteration budget (!ret), it sets the state
to TASK_STATE_IDLE to reschedule, without a secondary check on the
current task->state. This can overwrite the TASK_STATE_DRAINING state
set by a concurrent call to rxe_cleanup_task() or rxe_disable_task().
While state changes are protected by a spinlock, both rxe_cleanup_task()
and rxe_disable_task() release the lock while waiting for the task to
finish draining in the while(!is_done(task)) loop. The race occurs if
do_task() hits its iteration limit and acquires the lock in this window.
The cleanup logic may then proceed while the task incorrectly
reschedules itself, leading to a potential use-after-free.
This bug was introduced during the migration from tasklets to workqueues,
where the special handling for the draining case was lost.
Fix this by restoring the original pre-migration behavior. If the state is
TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to
force a new loop iteration. This allows the task to finish its work, so
that a subsequent iteration can reach the switch statement and correctly
transition the state to TASK_STATE_DRAINED, stopping the task as intended. |
| IPFire versions prior to 2.29 (Core Update 198) contain a command injection vulnerability that allows an authenticated attacker to execute arbitrary commands as the 'nobody' user via the BE_NAME parameter when installing a blacklist. When a blacklist is installed the application issues an HTTP POST to /cgi-bin/urlfilter.cgi and interpolates the value of BE_NAME directly into a shell invocation without appropriate sanitation. Crafted input can inject shell metacharacters, leading to arbitrary command execution in the context of the 'nobody' user. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: trbe: Return NULL pointer for allocation failures
When the TRBE driver fails to allocate a buffer, it currently returns
the error code "-ENOMEM". However, the caller etm_setup_aux() only
checks for a NULL pointer, so it misses the error. As a result, the
driver continues and eventually causes a kernel panic.
Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on
allocation failures. This allows that the callers can properly handle
the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp_metrics: use dst_dev_net_rcu()
Replace three dst_dev() with a lockdep enabled helper. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the pienumber parameter when updating the firewall country search defaults. When a user updates the default values for the firewall country search, the application issues an HTTP POST request to /cgi-bin/logs.cgi/firewalllogcountry.dat and the default number of countries to display is provided in the pienumber parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitation or encoding, allowing injected scripts to execute in the context of other users who view the affected firewall country search settings. |
| Starting with Firefox 142, it was possible for a compromised child process to trigger a use-after-free in the GPU or browser process using WebGPU-related IPC calls. This may have been usable to escape the child process sandbox. This vulnerability affects Firefox < 144.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Do not validate SSPP when it is not ready
Current code will validate current plane and previous plane to
confirm they can share a SSPP with multi-rect mode. The SSPP
is already allocated for previous plane, while current plane
is not associated with any SSPP yet. Null pointer is referenced
when validating the SSPP of current plane. Skip SSPP validation
for current plane.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: SM8650 EV1 rev1 4slam 2et (DT)
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : dpu_plane_is_multirect_capable+0x68/0x90
lr : dpu_assign_plane_resources+0x288/0x410
sp : ffff800093dcb770
x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000
x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800
x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080
x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff
x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200
x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000
x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950
x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438
x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000
Call trace:
dpu_plane_is_multirect_capable+0x68/0x90 (P)
dpu_crtc_atomic_check+0x5bc/0x650
drm_atomic_helper_check_planes+0x13c/0x220
drm_atomic_helper_check+0x58/0xb8
msm_atomic_check+0xd8/0xf0
drm_atomic_check_only+0x4a8/0x968
drm_atomic_commit+0x50/0xd8
drm_atomic_helper_update_plane+0x140/0x188
__setplane_atomic+0xfc/0x148
drm_mode_setplane+0x164/0x378
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xbc/0xf8
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x144/0x168
el0t_64_sync+0x198/0x1a0
Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1)
---[ end trace 0000000000000000 ]---
Patchwork: https://patchwork.freedesktop.org/patch/669224/ |
| By making minor configuration changes to the TropOS 4th Gen device, an authenticated user with the ability to run user level shell commands can enable access via secure shell (SSH) to an unrestricted root shell. This is possible through abuse of a particular set of scripts and executables that allow for certain commands to be run as root from an unprivileged context. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the UPDATE_VALUE parameter when updating the default time synchronization settings. When the default values displayed on the Time Server page are updated, the application issues an HTTP POST request to /cgi-bin/time.cgi, and the synchronization value is provided in the UPDATE_VALUE parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitation or encoding, allowing injected scripts to execute in the context of other users who view the affected Time Server configuration page. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid overflow while left shift operation
Should cast type of folio->index from pgoff_t to loff_t to avoid overflow
while left shift operation. |
| IPFire versions prior to 2.29 (Core Update 198) contain a command injection vulnerability that allows an authenticated attacker to execute arbitrary commands as the user 'nobody' via multiple parameters when creating a Proxy report. When a user creates a Proxy report the application issues an HTTP POST to /cgi-bin/logs.cgi/calamaris.dat and reads the values of DAY_BEGIN, MONTH_BEGIN, YEAR_BEGIN, DAY_END, MONTH_END, YEAR_END, NUM_DOMAINS, PERF_INTERVAL, NUM_CONTENT, HIST_LEVEL, NUM_HOSTS, NUM_URLS, and BYTE_UNIT, which are interpolated directly into the shell invocation of the mkreport helper. Because these parameters are never sanitized for improper characters or constructs, a crafted POST can inject shell metacharacters into one or more fields, causing arbitrary commands to run with the privileges of the 'nobody' user. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the REMOTELOG_ADDR parameter when updating the remote syslog server address. When a user updates the Remote logging Syslog server, the application issues an HTTP POST request to /cgi-bin/logs.cgi/config.dat and the server address is provided in the REMOTELOG_ADDR parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitation or encoding, allowing injected scripts to execute in the context of other users who view the affected configuration page. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
When the initialization of qm->debug.acc_diff_reg fails,
the probe process does not exit. However, after qm->debug.qm_diff_regs is
freed, it is not set to NULL. This can lead to a double free when the
remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs
should be set to NULL after it is freed. |
| The “Diagnostics Tools” page of the web-based configuration utility does not properly validate user-controlled input, allowing an authenticated user with high privileges to inject commands into the command shell of the TropOS 4th Gen device. The injected commands can be exploited to execute several set-uid (SUID) applications to ultimately gain root access to the TropOS device. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the PROT parameter when creating a new service. When a user adds a service, the application issues an HTTP POST request with the ACTION parameter set to saveservice, and the protocol type is specified in the PROT parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitization or encoding, allowing injected scripts to execute in the context of other users viewing the affected service entry. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: vringh: Modify the return value check
The return value of copy_from_iter and copy_to_iter can't be negative,
check whether the copied lengths are equal. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()
BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186
Read of size 2 at addr ffff8880289ef218 by task syz.6.248/14290
CPU: 0 UID: 0 PID: 14290 Comm: syz.6.248 Not tainted 6.16.4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x5f0 mm/kasan/report.c:482
kasan_report+0xca/0x100 mm/kasan/report.c:595
hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186
hfsplus_listxattr+0x5b6/0xbd0 fs/hfsplus/xattr.c:738
vfs_listxattr+0xbe/0x140 fs/xattr.c:493
listxattr+0xee/0x190 fs/xattr.c:924
filename_listxattr fs/xattr.c:958 [inline]
path_listxattrat+0x143/0x360 fs/xattr.c:988
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe0e9fae16d
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe0eae67f98 EFLAGS: 00000246 ORIG_RAX: 00000000000000c3
RAX: ffffffffffffffda RBX: 00007fe0ea205fa0 RCX: 00007fe0e9fae16d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000000
RBP: 00007fe0ea0480f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fe0ea206038 R14: 00007fe0ea205fa0 R15: 00007fe0eae48000
</TASK>
Allocated by task 14290:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4333 [inline]
__kmalloc_noprof+0x219/0x540 mm/slub.c:4345
kmalloc_noprof include/linux/slab.h:909 [inline]
hfsplus_find_init+0x95/0x1f0 fs/hfsplus/bfind.c:21
hfsplus_listxattr+0x331/0xbd0 fs/hfsplus/xattr.c:697
vfs_listxattr+0xbe/0x140 fs/xattr.c:493
listxattr+0xee/0x190 fs/xattr.c:924
filename_listxattr fs/xattr.c:958 [inline]
path_listxattrat+0x143/0x360 fs/xattr.c:988
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When hfsplus_uni2asc is called from hfsplus_listxattr,
it actually passes in a struct hfsplus_attr_unistr*.
The size of the corresponding structure is different from that of hfsplus_unistr,
so the previous fix (94458781aee6) is insufficient.
The pointer on the unicode buffer is still going beyond the allocated memory.
This patch introduces two warpper functions hfsplus_uni2asc_xattr_str and
hfsplus_uni2asc_str to process two unicode buffers,
struct hfsplus_attr_unistr* and struct hfsplus_unistr* respectively.
When ustrlen value is bigger than the allocated memory size,
the ustrlen value is limited to an safe size. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the TLS_HOSTNAME parameter when adding a new DNS entry. When a user adds a DNS entry, the application issues an HTTP POST request to /cgi-bin/dns.cgi and the TLS hostname is provided in the TLS_HOSTNAME parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitation or encoding, allowing injected scripts to execute in the context of other users who view the affected DNS configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF issue in f2fs_merge_page_bio()
As JY reported in bugzilla [1],
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : [0xffffffe51d249484] f2fs_is_cp_guaranteed+0x70/0x98
lr : [0xffffffe51d24adbc] f2fs_merge_page_bio+0x520/0x6d4
CPU: 3 UID: 0 PID: 6790 Comm: kworker/u16:3 Tainted: P B W OE 6.12.30-android16-5-maybe-dirty-4k #1 5f7701c9cbf727d1eebe77c89bbbeb3371e895e5
Tainted: [P]=PROPRIETARY_MODULE, [B]=BAD_PAGE, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Workqueue: writeback wb_workfn (flush-254:49)
Call trace:
f2fs_is_cp_guaranteed+0x70/0x98
f2fs_inplace_write_data+0x174/0x2f4
f2fs_do_write_data_page+0x214/0x81c
f2fs_write_single_data_page+0x28c/0x764
f2fs_write_data_pages+0x78c/0xce4
do_writepages+0xe8/0x2fc
__writeback_single_inode+0x4c/0x4b4
writeback_sb_inodes+0x314/0x540
__writeback_inodes_wb+0xa4/0xf4
wb_writeback+0x160/0x448
wb_workfn+0x2f0/0x5dc
process_scheduled_works+0x1c8/0x458
worker_thread+0x334/0x3f0
kthread+0x118/0x1ac
ret_from_fork+0x10/0x20
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220575
The panic was caused by UAF issue w/ below race condition:
kworker
- writepages
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #1 into bio & cache bio in
io->bio_list
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #2 into bio which is linked
in io->bio_list
write
- f2fs_write_begin
: write page #1
- f2fs_folio_wait_writeback
- f2fs_submit_merged_ipu_write
- f2fs_submit_write_bio
: submit bio which inclues page #1 and #2
software IRQ
- f2fs_write_end_io
- fscrypt_free_bounce_page
: freed bounced page which belongs to page #2
- inc_page_count( , WB_DATA_TYPE(data_folio), false)
: data_folio points to fio->encrypted_page
the bounced page can be freed before
accessing it in f2fs_is_cp_guarantee()
It can reproduce w/ below testcase:
Run below script in shell #1:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
Run below script in shell #2:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
So, in f2fs_merge_page_bio(), let's avoid using fio->encrypted_page after
commit page into internal ipu cache. |
| Command injection vulnerability exists in the “Logging” page of the web-based configuration utility. An authenticated user with low privileged network access for the configuration utility can execute arbitrary commands on the underlying OS to obtain root SSH access to the TropOS 4th Gen device. |
