| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RSSHub is an open source RSS feed generator. Prior to version 1.0.0-master.a429472, RSSHub allows remote attackers to use the server as a proxy to send HTTP GET requests to arbitrary targets and retrieve information in the internal network or conduct Denial-of-Service (DoS) attacks. The attacker can send malicious requests to a RSSHub server, to make the server send HTTP GET requests to arbitrary destinations and see partial responses. This may lead to leak the server IP address, which could be hidden behind a CDN; retrieving information in the internal network, e.g. which addresses/ports are accessible, the titles and meta descriptions of HTML pages; and denial of service amplification. The attacker could request the server to download some large files, or chain several SSRF requests in a single attacker request. |
| Use after free in Media Stream in Google Chrome prior to 143.0.7499.41 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Low) |
| Inappropriate implementation in WebRTC in Google Chrome prior to 143.0.7499.41 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: Low) |
| A denial-of-service vulnerability exists in github.com/sirupsen/logrus when using Entry.Writer() to log a single-line payload larger than 64KB without newline characters. Due to limitations in the internal bufio.Scanner, the read fails with "token too long" and the writer pipe is closed, leaving Writer() unusable and causing application unavailability (DoS). This affects versions < 1.8.3, 1.9.0, and 1.9.2. The issue is fixed in 1.8.3, 1.9.1, and 1.9.3+, where the input is chunked and the writer continues to function even if an error is logged. |
| Waveshare RS232/485 TO WIFI ETH (B) Serial to Ethernet/Wi-Fi Gateway Firmware V3.1.1.0: HW 4.3.2.1: Webpage V7.04T.07.002880.0301 allows attackers to set the Administrator password and username as blank values, allowing attackers to bypass authentication. |
| Waveshare RS232/485 TO WIFI ETH (B) Serial to Ethernet/Wi-Fi Gateway Firmware V3.1.1.0: HW 4.3.2.1: Webpage V7.04T.07.002880.0301 was discovered to render the Administrator password in plaintext. |
| Cross-site scripting (XSS) vulnerability in a reachable files_pdfviewer example directory in Nextcloud with versions before 22.2.10.33, 23.0.12.29, 24.0.12.28, 25.0.13.23, 26.0.13.20, 27.1.11.20, 28.0.14.11, 29.0.16.8, 30.0.17, 31.0.10, and 32.0.1 allows attackers to execute arbitrary JavaScript in the context of a user's browser via a crafted PDF file to viewer.html. This issue is related to CVE-2024-4367, but the root cause of this Nextcloud issue is that the product exposes executable example code on a same-origin basis. |
| Ruoyi v4.8.0 vulnerable to Incorrect Access Control. There is a missing checkUserDataScope permission check in the resetPwd Method of SysUserController.java. |
| A security vulnerability has been detected in macrozheng mall-swarm up to 1.0.3. Affected is the function delete of the file /member/readHistory/delete. Such manipulation of the argument ids leads to improper authorization. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in H3C Magic B0 up to 100R002. This impacts the function EditWlanMacList of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in JIZHICMS up to 2.5.5. The impacted element is an unknown function of the file /index.php/admins/Comment/addcomment.html of the component Comment Handler. The manipulation of the argument body leads to cross site scripting. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| PHPGurukul Billing System 1.0 is vulnerable to SQL Injection in the /admin/password-recovery.php endpoint. Specifically, the username and mobileno parameters accepts unvalidated user input, which is then concatenated directly into a backend SQL query. |
| FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. Prior to version 1.4.0, a business logic flaw in FileRise’s file/folder handling allows low-privilege users to perform unauthorized operations (view/delete/modify) on files created by other users. The root cause was inferring ownership/visibility from folder names (e.g., a folder named after a username) and missing server-side authorization/ownership checks across file operation endpoints. This amounted to an IDOR pattern: an attacker could operate on resources identified only by predictable names. This issue has been patched in version 1.4.0 and further hardened in version 1.5.0. A workaround for this issue involves restricting non-admin users to read-only or disable delete/rename APIs server-side, avoid creating top-level folders named after other usernames, and adding server-side checks that verify ownership before delete/rename/move. |
| FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. In version 1.4.0, a regression allowed folder visibility/ownership to be inferred from folder names. Low-privilege users could see or interact with folders matching their username and, in some cases, other users’ content. This issue has been patched in version 1.5.0, where it introduces explicit per-folder ACLs (owners/read/write/share/read_own) and strict server-side checks across list, read, write, share, rename, copy/move, zip, and WebDAV paths. |
| PHPGurukul Billing System 1.0 is vulnerable to SQL Injection in the admin/index.php endpoint. Specifically, the username parameter accepts unvalidated user input, which is then concatenated directly into a backend SQL query. |
| Snipe-IT before 8.3.4 allows stored XSS, allowing a low-privileged authenticated user to inject JavaScript that executes in an administrator's session, enabling privilege escalation. |
| PublicCMS V5.202506.b is vulnerable to Cross Site Request Forgery (CSRF) in the CkEditorAdminController. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()
In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.
Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
chardev: fix error handling in cdev_device_add()
While doing fault injection test, I got the following report:
------------[ cut here ]------------
kobject: '(null)' (0000000039956980): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 3 PID: 6306 at kobject_put+0x23d/0x4e0
CPU: 3 PID: 6306 Comm: 283 Tainted: G W 6.1.0-rc2-00005-g307c1086d7c9 #1253
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kobject_put+0x23d/0x4e0
Call Trace:
<TASK>
cdev_device_add+0x15e/0x1b0
__iio_device_register+0x13b4/0x1af0 [industrialio]
__devm_iio_device_register+0x22/0x90 [industrialio]
max517_probe+0x3d8/0x6b4 [max517]
i2c_device_probe+0xa81/0xc00
When device_add() is injected fault and returns error, if dev->devt is not set,
cdev_add() is not called, cdev_del() is not needed. Fix this by checking dev->devt
in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: add missing of_node_get() in dynamic partitions code
This fixes unbalanced of_node_put():
[ 1.078910] 6 cmdlinepart partitions found on MTD device gpmi-nand
[ 1.085116] Creating 6 MTD partitions on "gpmi-nand":
[ 1.090181] 0x000000000000-0x000008000000 : "nandboot"
[ 1.096952] 0x000008000000-0x000009000000 : "nandfit"
[ 1.103547] 0x000009000000-0x00000b000000 : "nandkernel"
[ 1.110317] 0x00000b000000-0x00000c000000 : "nanddtb"
[ 1.115525] ------------[ cut here ]------------
[ 1.120141] refcount_t: addition on 0; use-after-free.
[ 1.125328] WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xdc/0x148
[ 1.133528] Modules linked in:
[ 1.136589] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc7-next-20220930-04543-g8cf3f7
[ 1.146342] Hardware name: Freescale i.MX8DXL DDR3L EVK (DT)
[ 1.151999] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.158965] pc : refcount_warn_saturate+0xdc/0x148
[ 1.163760] lr : refcount_warn_saturate+0xdc/0x148
[ 1.168556] sp : ffff800009ddb080
[ 1.171866] x29: ffff800009ddb080 x28: ffff800009ddb35a x27: 0000000000000002
[ 1.179015] x26: ffff8000098b06ad x25: ffffffffffffffff x24: ffff0a00ffffff05
[ 1.186165] x23: ffff00001fdf6470 x22: ffff800009ddb367 x21: 0000000000000000
[ 1.193314] x20: ffff00001fdfebe8 x19: ffff00001fdfec50 x18: ffffffffffffffff
[ 1.200464] x17: 0000000000000000 x16: 0000000000000118 x15: 0000000000000004
[ 1.207614] x14: 0000000000000fff x13: ffff800009bca248 x12: 0000000000000003
[ 1.214764] x11: 00000000ffffefff x10: c0000000ffffefff x9 : 4762cb2ccb52de00
[ 1.221914] x8 : 4762cb2ccb52de00 x7 : 205d313431303231 x6 : 312e31202020205b
[ 1.229063] x5 : ffff800009d55c1f x4 : 0000000000000001 x3 : 0000000000000000
[ 1.236213] x2 : 0000000000000000 x1 : ffff800009954be6 x0 : 000000000000002a
[ 1.243365] Call trace:
[ 1.245806] refcount_warn_saturate+0xdc/0x148
[ 1.250253] kobject_get+0x98/0x9c
[ 1.253658] of_node_get+0x20/0x34
[ 1.257072] of_fwnode_get+0x3c/0x54
[ 1.260652] fwnode_get_nth_parent+0xd8/0xf4
[ 1.264926] fwnode_full_name_string+0x3c/0xb4
[ 1.269373] device_node_string+0x498/0x5b4
[ 1.273561] pointer+0x41c/0x5d0
[ 1.276793] vsnprintf+0x4d8/0x694
[ 1.280198] vprintk_store+0x164/0x528
[ 1.283951] vprintk_emit+0x98/0x164
[ 1.287530] vprintk_default+0x44/0x6c
[ 1.291284] vprintk+0xf0/0x134
[ 1.294428] _printk+0x54/0x7c
[ 1.297486] of_node_release+0xe8/0x128
[ 1.301326] kobject_put+0x98/0xfc
[ 1.304732] of_node_put+0x1c/0x28
[ 1.308137] add_mtd_device+0x484/0x6d4
[ 1.311977] add_mtd_partitions+0xf0/0x1d0
[ 1.316078] parse_mtd_partitions+0x45c/0x518
[ 1.320439] mtd_device_parse_register+0xb0/0x274
[ 1.325147] gpmi_nand_probe+0x51c/0x650
[ 1.329074] platform_probe+0xa8/0xd0
[ 1.332740] really_probe+0x130/0x334
[ 1.336406] __driver_probe_device+0xb4/0xe0
[ 1.340681] driver_probe_device+0x3c/0x1f8
[ 1.344869] __driver_attach+0xdc/0x1a4
[ 1.348708] bus_for_each_dev+0x80/0xcc
[ 1.352548] driver_attach+0x24/0x30
[ 1.356127] bus_add_driver+0x108/0x1f4
[ 1.359967] driver_register+0x78/0x114
[ 1.363807] __platform_driver_register+0x24/0x30
[ 1.368515] gpmi_nand_driver_init+0x1c/0x28
[ 1.372798] do_one_initcall+0xbc/0x238
[ 1.376638] do_initcall_level+0x94/0xb4
[ 1.380565] do_initcalls+0x54/0x94
[ 1.384058] do_basic_setup+0x1c/0x28
[ 1.387724] kernel_init_freeable+0x110/0x188
[ 1.392084] kernel_init+0x20/0x1a0
[ 1.395578] ret_from_fork+0x10/0x20
[ 1.399157] ---[ end trace 0000000000000000 ]---
[ 1.403782] ------------[ cut here ]------------ |
