| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: fix panic when DSA master device unbinds on shutdown
Rafael reports that on a system with LX2160A and Marvell DSA switches,
if a reboot occurs while the DSA master (dpaa2-eth) is up, the following
panic can be seen:
systemd-shutdown[1]: Rebooting.
Unable to handle kernel paging request at virtual address 00a0000800000041
[00a0000800000041] address between user and kernel address ranges
Internal error: Oops: 96000004 [#1] PREEMPT SMP
CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32
pc : dsa_slave_netdevice_event+0x130/0x3e4
lr : raw_notifier_call_chain+0x50/0x6c
Call trace:
dsa_slave_netdevice_event+0x130/0x3e4
raw_notifier_call_chain+0x50/0x6c
call_netdevice_notifiers_info+0x54/0xa0
__dev_close_many+0x50/0x130
dev_close_many+0x84/0x120
unregister_netdevice_many+0x130/0x710
unregister_netdevice_queue+0x8c/0xd0
unregister_netdev+0x20/0x30
dpaa2_eth_remove+0x68/0x190
fsl_mc_driver_remove+0x20/0x5c
__device_release_driver+0x21c/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x94/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_device_remove+0x24/0x40
__fsl_mc_device_remove+0xc/0x20
device_for_each_child+0x58/0xa0
dprc_remove+0x90/0xb0
fsl_mc_driver_remove+0x20/0x5c
__device_release_driver+0x21c/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_bus_remove+0x80/0x100
fsl_mc_bus_shutdown+0xc/0x1c
platform_shutdown+0x20/0x30
device_shutdown+0x154/0x330
__do_sys_reboot+0x1cc/0x250
__arm64_sys_reboot+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x4c/0x150
el0_svc+0x24/0xb0
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x178/0x17c
It can be seen from the stack trace that the problem is that the
deregistration of the master causes a dev_close(), which gets notified
as NETDEV_GOING_DOWN to dsa_slave_netdevice_event().
But dsa_switch_shutdown() has already run, and this has unregistered the
DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to
call dev_close_many() on those slave interfaces, leading to the problem.
The previous attempt to avoid the NETDEV_GOING_DOWN on the master after
dsa_switch_shutdown() was called seems improper. Unregistering the slave
interfaces is unnecessary and unhelpful. Instead, after the slaves have
stopped being uppers of the DSA master, we can now reset to NULL the
master->dsa_ptr pointer, which will make DSA start ignoring all future
notifier events on the master. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/thermal/loongson2_thermal: Fix incorrect PTR_ERR() judgment
PTR_ERR() returns -ENODEV when thermal-zones are undefined, and we need
-ENODEV as the right value for comparison.
Otherwise, tz->type is NULL when thermal-zones is undefined, resulting
in the following error:
[ 12.290030] CPU 1 Unable to handle kernel paging request at virtual address fffffffffffffff1, era == 900000000355f410, ra == 90000000031579b8
[ 12.302877] Oops[#1]:
[ 12.305190] CPU: 1 PID: 181 Comm: systemd-udevd Not tainted 6.6.0-rc7+ #5385
[ 12.312304] pc 900000000355f410 ra 90000000031579b8 tp 90000001069e8000 sp 90000001069eba10
[ 12.320739] a0 0000000000000000 a1 fffffffffffffff1 a2 0000000000000014 a3 0000000000000001
[ 12.329173] a4 90000001069eb990 a5 0000000000000001 a6 0000000000001001 a7 900000010003431c
[ 12.337606] t0 fffffffffffffff1 t1 54567fd5da9b4fd4 t2 900000010614ec40 t3 00000000000dc901
[ 12.346041] t4 0000000000000000 t5 0000000000000004 t6 900000010614ee20 t7 900000000d00b790
[ 12.354472] t8 00000000000dc901 u0 54567fd5da9b4fd4 s9 900000000402ae10 s0 900000010614ec40
[ 12.362916] s1 90000000039fced0 s2 ffffffffffffffed s3 ffffffffffffffed s4 9000000003acc000
[ 12.362931] s5 0000000000000004 s6 fffffffffffff000 s7 0000000000000490 s8 90000001028b2ec8
[ 12.362938] ra: 90000000031579b8 thermal_add_hwmon_sysfs+0x258/0x300
[ 12.386411] ERA: 900000000355f410 strscpy+0xf0/0x160
[ 12.391626] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 12.397898] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 12.403678] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 12.409859] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 12.415882] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 12.415907] BADV: fffffffffffffff1
[ 12.415911] PRID: 0014a000 (Loongson-64bit, Loongson-2K1000)
[ 12.415917] Modules linked in: loongson2_thermal(+) vfat fat uio_pdrv_genirq uio fuse zram zsmalloc
[ 12.415950] Process systemd-udevd (pid: 181, threadinfo=00000000358b9718, task=00000000ace72fe3)
[ 12.415961] Stack : 0000000000000dc0 54567fd5da9b4fd4 900000000402ae10 9000000002df9358
[ 12.415982] ffffffffffffffed 0000000000000004 9000000107a10aa8 90000001002a3410
[ 12.415999] ffffffffffffffed ffffffffffffffed 9000000107a11268 9000000003157ab0
[ 12.416016] 9000000107a10aa8 ffffff80020fc0c8 90000001002a3410 ffffffffffffffed
[ 12.416032] 0000000000000024 ffffff80020cc1e8 900000000402b2a0 9000000003acc000
[ 12.416048] 90000001002a3410 0000000000000000 ffffff80020f4030 90000001002a3410
[ 12.416065] 0000000000000000 9000000002df6808 90000001002a3410 0000000000000000
[ 12.416081] ffffff80020f4030 0000000000000000 90000001002a3410 9000000002df2ba8
[ 12.416097] 00000000000000b4 90000001002a34f4 90000001002a3410 0000000000000002
[ 12.416114] ffffff80020f4030 fffffffffffffff0 90000001002a3410 9000000002df2f30
[ 12.416131] ...
[ 12.416138] Call Trace:
[ 12.416142] [<900000000355f410>] strscpy+0xf0/0x160
[ 12.416167] [<90000000031579b8>] thermal_add_hwmon_sysfs+0x258/0x300
[ 12.416183] [<9000000003157ab0>] devm_thermal_add_hwmon_sysfs+0x50/0xe0
[ 12.416200] [<ffffff80020cc1e8>] loongson2_thermal_probe+0x128/0x200 [loongson2_thermal]
[ 12.416232] [<9000000002df6808>] platform_probe+0x68/0x140
[ 12.416249] [<9000000002df2ba8>] really_probe+0xc8/0x3c0
[ 12.416269] [<9000000002df2f30>] __driver_probe_device+0x90/0x180
[ 12.416286] [<9000000002df3058>] driver_probe_device+0x38/0x160
[ 12.416302] [<9000000002df33a8>] __driver_attach+0xa8/0x200
[ 12.416314] [<9000000002deffec>] bus_for_each_dev+0x8c/0x120
[ 12.416330] [<9000000002df198c>] bus_add_driver+0x10c/0x2a0
[ 12.416346] [<9000000002df46b4>] driver_register+0x74/0x160
[ 12.416358] [<90000000022201a4>] do_one_initcall+0x84/0x220
[ 12.416372] [<90000000022f3ab8>] do_init_module+0x58/0x2c0
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()")
changed the allocation logic to call put_device() to perform host cleanup
with the assumption that IDA removal and stopping the kthread would
properly be performed in scsi_host_dev_release(). However, in the unlikely
case that the error handler thread fails to spawn, shost->ehandler is set
to ERR_PTR(-ENOMEM).
The error handler cleanup code in scsi_host_dev_release() will call
kthread_stop() if shost->ehandler != NULL which will always be the case
whether the kthread was successfully spawned or not. In the case that it
failed to spawn this has the nasty side effect of trying to dereference an
invalid pointer when kthread_stop() is called. The following splat provides
an example of this behavior in the wild:
scsi host11: error handler thread failed to spawn, error = -4
Kernel attempted to read user page (10c) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x0000010c
Faulting instruction address: 0xc00000000818e9a8
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region
hash dm_log dm_mod fuse overlay squashfs loop
CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1
NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8
REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28228228
XER: 20040001
CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0
GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc
GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000
GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff
GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0
GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288
GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898
GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000
GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc
NIP [c00000000818e9a8] kthread_stop+0x38/0x230
LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160
Call Trace:
[c000000033bb2c48] 0xc000000033bb2c48 (unreliable)
[c0000000089846e8] scsi_host_dev_release+0x98/0x160
[c00000000891e960] device_release+0x60/0x100
[c0000000087e55c4] kobject_release+0x84/0x210
[c00000000891ec78] put_device+0x28/0x40
[c000000008984ea4] scsi_host_alloc+0x314/0x430
[c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi]
[c000000008110104] vio_bus_probe+0xa4/0x4b0
[c00000000892a860] really_probe+0x140/0x680
[c00000000892aefc] driver_probe_device+0x15c/0x200
[c00000000892b63c] device_driver_attach+0xcc/0xe0
[c00000000892b740] __driver_attach+0xf0/0x200
[c000000008926f28] bus_for_each_dev+0xa8/0x130
[c000000008929ce4] driver_attach+0x34/0x50
[c000000008928fc0] bus_add_driver+0x1b0/0x300
[c00000000892c798] driver_register+0x98/0x1a0
[c00000000810eb60] __vio_register_driver+0x80/0xe0
[c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi]
[c0000000080121d0] do_one_initcall+0x60/0x2d0
[c000000008261abc] do_init_module+0x7c/0x320
[c000000008265700] load_module+0x2350/0x25b0
[c000000008265cb4] __do_sys_finit_module+0xd4/0x160
[c000000008031110] system_call_exception+0x150/0x2d0
[c00000000800d35c] system_call_common+0xec/0x278
Fix this be nulling shost->ehandler when the kthread fails to spawn. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in ext4_fill_super
Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.
If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.
This can easily be reproduced by calling an infinite loop of:
systemctl start <ext4_on_lvm>.mount, and
systemctl stop <ext4_on_lvm>.mount
... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed. |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: fix memory leak in virtio_fs_probe()
When accidentally passing twice the same tag to qemu, kmemleak ended up
reporting a memory leak in virtiofs. Also, looking at the log I saw the
following error (that's when I realised the duplicated tag):
virtiofs: probe of virtio5 failed with error -17
Here's the kmemleak log for reference:
unreferenced object 0xffff888103d47800 (size 1024):
comm "systemd-udevd", pid 118, jiffies 4294893780 (age 18.340s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 80 90 02 a0 ff ff ff ff ................
backtrace:
[<000000000ebb87c1>] virtio_fs_probe+0x171/0x7ae [virtiofs]
[<00000000f8aca419>] virtio_dev_probe+0x15f/0x210
[<000000004d6baf3c>] really_probe+0xea/0x430
[<00000000a6ceeac8>] device_driver_attach+0xa8/0xb0
[<00000000196f47a7>] __driver_attach+0x98/0x140
[<000000000b20601d>] bus_for_each_dev+0x7b/0xc0
[<00000000399c7b7f>] bus_add_driver+0x11b/0x1f0
[<0000000032b09ba7>] driver_register+0x8f/0xe0
[<00000000cdd55998>] 0xffffffffa002c013
[<000000000ea196a2>] do_one_initcall+0x64/0x2e0
[<0000000008f727ce>] do_init_module+0x5c/0x260
[<000000003cdedab6>] __do_sys_finit_module+0xb5/0x120
[<00000000ad2f48c6>] do_syscall_64+0x33/0x40
[<00000000809526b5>] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| debian/tor.init in the Debian tor_0.2.9.11-1~deb9u1 package for Tor was designed to execute aa-exec from the standard system pathname if the apparmor package is installed, but implements this incorrectly (with a wrong assumption that the specific pathname would remain the same forever), which allows attackers to bypass intended AppArmor restrictions by leveraging the silent loss of this protection mechanism. NOTE: this does not affect systems, such as default Debian stretch installations, on which Tor startup relies on a systemd unit file (instead of this tor.init script). |
| Stack-based buffer overflow in the getpwnam and getgrnam functions of the NSS module nss-mymachines in systemd. |
| The agent in Bomgar Remote Support 15.2.x before 15.2.3, 16.1.x before 16.1.5, and 16.2.x before 16.2.4 allows DLL hijacking because of weak %SYSTEMDRIVE%\ProgramData permissions. |
| systemd v233 and earlier fails to safely parse usernames starting with a numeric digit (e.g. "0day"), running the service in question with root privileges rather than the user intended. |
| A flaw in systemd v228 in /src/basic/fs-util.c caused world writable suid files to be created when using the systemd timers features, allowing local attackers to escalate their privileges to root. This is fixed in v229. |
| An issue was discovered in AppArmor before 2.12. Incorrect handling of unknown AppArmor profiles in AppArmor init scripts, upstart jobs, and/or systemd unit files allows an attacker to possibly have increased attack surfaces of processes that were intended to be confined by AppArmor. This is due to the common logic to handle 'restart' operations removing AppArmor profiles that aren't found in the typical filesystem locations, such as /etc/apparmor.d/. Userspace projects that manage their own AppArmor profiles in atypical directories, such as what's done by LXD and Docker, are affected by this flaw in the AppArmor init script logic. |
| Unquoted Windows search path vulnerability in the guest service in Unisys s-Par before 4.4.20 allows local users to gain privileges via a Trojan horse executable file in the %SYSTEMDRIVE% directory, as demonstrated by program.exe. |
| LightDM through 1.22.0, when systemd is used in Ubuntu 16.10 and 17.x, allows physically proximate attackers to bypass intended AppArmor restrictions and visit the home directories of arbitrary users by establishing a guest session. |
| In Adam Kropelin adk0212 APC UPS Daemon through 3.14.14, the default installation of APCUPSD allows a local authenticated, but unprivileged, user to run arbitrary code with elevated privileges by replacing the service executable apcupsd.exe with a malicious executable that will run with SYSTEM privileges at startup. This occurs because of "RW NT AUTHORITY\Authenticated Users" permissions for %SYSTEMDRIVE%\apcupsd\bin\apcupsd.exe. |
| systemd-resolved through 233 allows remote attackers to cause a denial of service (daemon crash) via a crafted DNS response with an empty question section. |
| In systemd 223 through 235, a remote DNS server can respond with a custom crafted DNS NSEC resource record to trigger an infinite loop in the dns_packet_read_type_window() function of the 'systemd-resolved' service and cause a DoS of the affected service. |
| In systemd through 233, certain sizes passed to dns_packet_new in systemd-resolved can cause it to allocate a buffer that's too small. A malicious DNS server can exploit this via a response with a specially crafted TCP payload to trick systemd-resolved into allocating a buffer that's too small, and subsequently write arbitrary data beyond the end of it. |
| Net Monitor for Employees Pro through 5.3.4 has an unquoted service path, which allows a Security Feature Bypass of its documented "Block applications" design goal. The local attacker must have privileges to write to program.exe in a protected directory, such as the %SYSTEMDRIVE% directory, and thus the issue is not interpreted as a direct privilege escalation. However, the local attacker might have the goal of executing program.exe even though program.exe is a blocked application. |
| The lxd-unix.socket systemd unit file in the Ubuntu lxd package before 0.20-0ubuntu4.1 uses world-readable permissions for /var/lib/lxd/unix.socket, which allows local users to gain privileges via unspecified vectors. |
| Unquoted Windows search path vulnerability in the autorun value in Dell SonicWall NetExtender before 7.5.227 and 8.0.x before 8.0.238, as used in the SRA firmware before 7.5.1.2-40sv and 8.x before 8.0.0.3-23sv, allows local users to gain privileges via a Trojan horse program in the %SYSTEMDRIVE% folder. |
