| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Arbitrary file read in NetScaler Console and NetScaler SDX (SVM) |
| Improper access control on the NetScaler Management Interface in NetScaler ADC and NetScaler Gateway |
| A flaw was found in pdfTeX. Insufficient sanitizing in the TeX notation filter resulted in an arbitrary file read risk on sites where pdfTeX is available, such as those with TeX Live installed. |
| A vulnerability in the implementation of the Simple Network Management Protocol Version 3 (SNMPv3) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to poll an affected device using SNMP, even if the device is configured to deny SNMP traffic from an unauthorized source or the SNMPv3 username is removed from the configuration.
This vulnerability exists because of the way that the SNMPv3 configuration is stored in the Cisco IOS Software and Cisco IOS XE Software startup configuration. An attacker could exploit this vulnerability by polling an affected device from a source address that should have been denied. A successful exploit could allow the attacker to perform SNMP operations from a source that should be denied.
Note: The attacker has no control of the SNMPv3 configuration. To exploit this vulnerability, the attacker must have valid SNMPv3 user credentials.
For more information, see the section of this advisory. |
| A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM). |
| A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device.
This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. |
| A vulnerability in the bootstrap loading of Cisco IOS XE Software could allow an authenticated, local attacker to write arbitrary files to an affected system.
This vulnerability is due to insufficient input validation of the bootstrap file that is read by the system software when a device is first deployed in SD-WAN mode or when an administrator configures SD-Routing on the device. An attacker could exploit this vulnerability by modifying a bootstrap file generated by Cisco Catalyst SD-WAN Manager, loading it into the device flash, and then either reloading the device in a green field deployment in SD-WAN mode or configuring the device with SD-Routing. A successful exploit could allow the attacker to perform arbitrary file writes to the underlying operating system. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mdiobus: Fix potential out-of-bounds clause 45 read/write access
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation. |
| Improper validation of specified quantity in input issue exists in Real-time Bus Tracking System versions prior to 1.1. If exploited, a denial of service (DoS) condition may be caused by an attacker who can log in to the administrative page of the affected product. |
| Incorrect authentication vulnerability in ParkingDoor. Through this vulnerability it is possible to operate the device without the access being logged in the application and even if the access permissions have been revoked. |
| The initial code parsing the manifest did not check the content of the file names yet later code assumed that it was checked and panicked when encountering illegal characters, resulting in a crash of Routinator. |
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01231341 / MOLY01263331 / MOLY01233835; Issue ID: MSV-2165. |
| A key used in logging.json does not follow the least privilege principle by default and is exposed to local users in the Rapid7 Platform. This allows an attacker with local access to a machine with the logging.json file to use that key to authenticate to the platform with high privileges. This was fixed in the Rapid7 platform starting 3 April 2024 via the introduction of a restricted role and the removal of automatic API key generation on installation of an agent. |
| Eclipse Jetty is a lightweight, highly scalable, Java-based web server and Servlet engine . It includes a utility class, HttpURI, for URI/URL parsing.
The HttpURI class does insufficient validation on the authority segment of a URI. However the behaviour of HttpURI
differs from the common browsers in how it handles a URI that would be
considered invalid if fully validated against the RRC. Specifically HttpURI
and the browser may differ on the value of the host extracted from an
invalid URI and thus a combination of Jetty and a vulnerable browser may
be vulnerable to a open redirect attack or to a SSRF attack if the URI
is used after passing validation checks. |
| Nokia Single RAN baseband software versions earlier than 24R1-SR 2.1 MP contain a SOAP message input validation flaw, which in theory could potentially be used for causing resource exhaustion in the Single RAN baseband OAM service.
No practical exploit has been detected for this flaw. However, the issue has been corrected starting from release 24R1-SR 2.1 MP by adding sufficient input validation for received SOAP requests, effectively mitigating the reported issue. |
| An issue was discovered in Samsung Mobile Processor and Wearable Processor Exynos 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, Modem 5123, and Modem 5300. The baseband software does not properly check the length specified by the MM (Mobility Management) module, which can lead to Denial of Service. |
| Net::IP::LPM version 1.10 for Perl does not properly consider leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses.
Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation. |
| An unauthenticated attacker who can connect to the Web Services feature (HTTP TCP port 80) can issue a WS-Scan SOAP request containing an unexpected JobToken value which will crash the target device. The device will reboot, after which the attacker can reissue the command to repeatedly crash the device. |
| Meshtastic-Android is an Android application for the mesh radio software Meshtastic. Prior to version 2.5.21, an attacker is able to send an unencrypted direct message to a victim impersonating any other node of the mesh. This message will be displayed in the same chat that the victim normally communicates with the other node and it will appear as using PKC, while it is not. This means that the victim will be provided with a false sense of security due to the green padlock displayed when using PKC and they'll read the attacker's message as legitimate. Version 2.5.21 contains a patch for the issue. It is suggested to implement a stricter control on whether a message has been received using PKC or using the shared Meshtastic channel key. Moreover, instead of showing no green padlock icon in the chat with no PKC, consider using an explicit indicator like, for example, the yellow half-open padlock displayed when in HAM mode. This remediation, however, applies to the client applications rather than the Meshtastic firmware. |
| An unauthenticated attacker who can connect to TCP port 9100 can issue a Printer Job Language (PJL) command that will crash the target device. The device will reboot, after which the attacker can reissue the command to repeatedly crash the device. A malformed PJL variable FORMLINES is set to a non number value causing the target to crash. |
