| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| No exception handling vulnerability which revealed sensitive or excessive information to users.
|
| Tooljet v1.6 does not properly handle missing values in the API, allowing attackers to arbitrarily reset passwords via a crafted HTTP request. |
| An issue was discovered in Exynos Mobile Processor and Modem for Exynos Modem 5123, Exynos Modem 5300, Exynos 980, and Exynos 1080. Binding of a wrong resource can occur due to improper handling of parameters while binding a network interface. |
| When sampling randomness for a shared secret, the implementation of Kyber and FrodoKEM, did not check whether crypto/rand.Read() returns an error. In rare deployment cases (error thrown by the Read() function), this could lead to a predictable shared secret.
The tkn20 and blindrsa components did not check whether enough randomness was returned from the user provided randomness source. Typically the user provides crypto/rand.Reader, which in the vast majority of cases will always return the right number random bytes. In the cases where it does not, or the user provides a source that does not, the blinding for blindrsa is weak and integrity of the plaintext is not ensured in tkn20.
|
| Improper conditions check in the Intel(R) SGX SDK software may allow a privileged user to potentially enable information disclosure via local access. |
| Uncaught exception in the Intel(R) Iris(R) Xe MAX drivers for Windows before version 100.0.5.1436(v2) may allow a privileged user to potentially enable denial of service via local access. |
| Uncaught exception in webserver for the Integrated BMC in some Intel(R) platforms before versions 2.86, 2.09 and 2.78 may allow a privileged user to potentially enable denial of service via network access. |
| vm2 is a sandbox that can run untrusted code with Node's built-in modules. In versions 3.9.17 and lower of vm2 it was possible to get a read-write reference to the node `inspect` method and edit options for `console.log`. As a result a threat actor can edit options for the `console.log` command. This vulnerability was patched in the release of version `3.9.18` of `vm2`. Users are advised to upgrade. Users unable to upgrade may make the `inspect` method readonly with `vm.readonly(inspect)` after creating a vm. |
| vm2 is a sandbox that can run untrusted code with Node's built-in modules. A sandbox escape vulnerability exists in vm2 for versions up to and including 3.9.17. It abuses an unexpected creation of a host object based on the specification of `Proxy`. As a result a threat actor can bypass the sandbox protections to gain remote code execution rights on the host running the sandbox. This vulnerability was patched in the release of version `3.9.18` of `vm2`. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Improper handling of alternate encoding occurs when Elastic Defend on Windows systems attempts to scan a file or process encoded as a multibyte character. This leads to an uncaught exception causing Elastic Defend to crash which in turn will prevent it from quarantining the file and/or killing the process. |
| In mintplex-labs/anything-llm, a vulnerability exists in the thread update process that allows users with Default or Manager roles to escalate their privileges to Administrator. The issue arises from improper input validation when handling HTTP POST requests to the endpoint `/workspace/:slug/thread/:threadSlug/update`. Specifically, the application fails to validate or check user input before passing it to the `workspace_thread` Prisma model for execution. This oversight allows attackers to craft a Prisma relation query operation that manipulates the `users` model to change a user's role to admin. Successful exploitation grants attackers the highest level of user privileges, enabling them to see and perform all actions within the system. |
| An Improper Handling of Exceptional Conditions vulnerability in the command-line processing of Juniper Networks Junos OS on SRX1500, SRX4100, and SRX4200 devices allows a local, low-privileged authenticated attacker executing the 'show chassis environment pem' command to cause the chassis daemon (chassisd) to crash and restart, resulting in a temporary Denial of Service (DoS). However, repeated execution of this command will eventually cause the chassisd process to fail to restart, impacting packet processing on the system.
This issue affects Junos OS on SRX1500, SRX4100, SRX4200:
* All versions before 21.4R3-S9,
* from 22.2 before 22.2R3-S5,
* from 22.3 before 22.3R3-S4,
* from 22.4 before 22.4R3-S4,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S1. |
| On the affected platforms running EOS, a malformed DHCP packet might cause the DHCP relay agent to restart. |
| In wlan firmware, there is possible system crash due to an uncaught exception. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07664720; Issue ID: ALPS07664720. |
|
An Improper Handling of Exceptional Conditions vulnerability in AS PATH processing of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a BGP update message with an AS PATH containing a large number of 4-byte ASes, leading to a Denial of Service (DoS). Continued receipt and processing of these BGP updates will create a sustained Denial of Service (DoS) condition.
This issue is hit when the router has Non-Stop Routing (NSR) enabled, has a non-4-byte-AS capable BGP neighbor, receives a BGP update message with a prefix that includes a long AS PATH containing large number of 4-byte ASes, and has to advertise the prefix towards the non-4-byte-AS capable BGP neighbor.
Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability.
This issue affects:
Juniper Networks Junos OS:
* All versions prior to 20.4R3-S8;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S5;
* 22.1 versions prior to 22.1R3-S4;
* 22.2 versions prior to 22.2R3-S2;
* 22.3 versions prior to 22.3R2-S2, 22.3R3-S1;
* 22.4 versions prior to 22.4R2-S1, 22.4R3.
Juniper Networks Junos OS Evolved
* All versions prior to 20.4R3-S8-EVO;
* 21.1 versions 21.1R1-EVO and later;
* 21.2 versions prior to 21.2R3-S6-EVO;
* 21.3 versions prior to 21.3R3-S5-EVO;
* 21.4 versions prior to 21.4R3-S5-EVO;
* 22.1 versions prior to 22.1R3-S4-EVO;
* 22.2 versions prior to 22.2R3-S2-EVO;
* 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO;
* 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO.
|
| Nanopb is a small code-size Protocol Buffers implementation. When the compile time option PB_ENABLE_MALLOC is enabled, the message contains at least one field with FT_POINTER field type, custom stream callback is used with unknown stream length. and the pb_decode_ex() function is used with flag PB_DECODE_DELIMITED, then the pb_decode_ex() function does not automatically call pb_release(), like is done for other failure cases. This could lead to memory leak and potential denial-of-service. This vulnerability is fixed in 0.4.9.1. |
| A vulnerability in the Secure Sockets Layer (SSL) Engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper error handling while processing SSL traffic. An attacker could exploit this vulnerability by sending a large volume of crafted SSL traffic to the vulnerable device. A successful exploit could allow the attacker to degrade the device performance by triggering a persistent high CPU utilization condition. Cisco Bug IDs: CSCvh89340. |
| A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792. |
| A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the firmware of an affected phone incorrectly handles errors that could occur when an incoming phone call is not answered. An attacker could exploit this vulnerability by sending a set of maliciously crafted SIP packets to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition. This vulnerability affects Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware if they are running a Multiplatform Firmware release prior to Release 11.1(2). Cisco Bug IDs: CSCvi24718. |
| The transport_message_handler function in SCP-Firmware release versions 2.11.0-2.15.0 does not properly handle errors, potentially allowing an Application Processor (AP) to cause a buffer overflow in System Control Processor (SCP) firmware. |
