| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup()
The group variable can't be used to retrieve ptdev in our second loop,
because it points to the previously iterated list_head, not a valid
group. Get the ptdev object from the scheduler instead. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix a possible memory leak
In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails
driver is not freeing the memory allocated for "rdev->chip_ctx". |
| In the Linux kernel, the following vulnerability has been resolved:
net: systemport: fix potential memory leak in bcm_sysport_xmit()
The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb
in case of dma_map_single() fails, add dev_kfree_skb() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix potential memory leak in bcmasp_xmit()
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb
in case of mapping fails, add dev_kfree_skb() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Update rx_bytes on read_skb()
Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt()
calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after
vsock_transport::read_skb().
While here, also inform the peer that we've freed up space and it has more
credit.
Failing to update rx_bytes after packet is dequeued leads to a warning on
SOCK_STREAM recv():
[ 233.396654] rx_queue is empty, but rx_bytes is non-zero
[ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sun3_82586: fix potential memory leak in sun3_82586_send_packet()
The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb
in case of skb->len being too long, add dev_kfree_skb() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
be2net: fix potential memory leak in be_xmit()
The be_xmit() returns NETDEV_TX_OK without freeing skb
in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
fsl/fman: Fix refcount handling of fman-related devices
In mac_probe() there are multiple calls to of_find_device_by_node(),
fman_bind() and fman_port_bind() which takes references to of_dev->dev.
Not all references taken by these calls are released later on error path
in mac_probe() and in mac_remove() which lead to reference leaks.
Add references release. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve param->string when parsing mount options
In bpf_parse_param(), keep the value of param->string intact so it can
be freed later. Otherwise, the kmalloc area pointed to by param->string
will be leaked as shown below:
unreferenced object 0xffff888118c46d20 (size 8):
comm "new_name", pid 12109, jiffies 4295580214
hex dump (first 8 bytes):
61 6e 79 00 38 c9 5c 7e any.8.\~
backtrace (crc e1b7f876):
[<00000000c6848ac7>] kmemleak_alloc+0x4b/0x80
[<00000000de9f7d00>] __kmalloc_node_track_caller_noprof+0x36e/0x4a0
[<000000003e29b886>] memdup_user+0x32/0xa0
[<0000000007248326>] strndup_user+0x46/0x60
[<0000000035b3dd29>] __x64_sys_fsconfig+0x368/0x3d0
[<0000000018657927>] x64_sys_call+0xff/0x9f0
[<00000000c0cabc95>] do_syscall_64+0x3b/0xc0
[<000000002f331597>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Make sure internal and UAPI bpf_redirect flags don't overlap
The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.
With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: devmap: provide rxq after redirect
rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.
This is particularly bad since accessing ingress_ifindex, e.g.
SEC("xdp")
int prog(struct xdp_md *pkt)
{
return bpf_redirect_map(&dev_redirect_map, 0, 0);
}
SEC("xdp/devmap")
int prog_after_redirect(struct xdp_md *pkt)
{
bpf_printk("ifindex %i", pkt->ingress_ifindex);
return XDP_PASS;
}
depends on access to rxq, so a NULL pointer gets dereferenced:
<1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[ 574.475188] #PF: supervisor read access in kernel mode
<1>[ 574.475194] #PF: error_code(0x0000) - not-present page
<6>[ 574.475199] PGD 0 P4D 0
<4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23
<4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023
<4>[ 574.475231] Workqueue: mld mld_ifc_work
<4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b
<4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206
<4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000
<4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0
<4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001
<4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000
<4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000
<4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000
<4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0
<4>[ 574.475303] PKRU: 55555554
<4>[ 574.475306] Call Trace:
<4>[ 574.475313] <IRQ>
<4>[ 574.475318] ? __die+0x23/0x70
<4>[ 574.475329] ? page_fault_oops+0x180/0x4c0
<4>[ 574.475339] ? skb_pp_cow_data+0x34c/0x490
<4>[ 574.475346] ? kmem_cache_free+0x257/0x280
<4>[ 574.475357] ? exc_page_fault+0x67/0x150
<4>[ 574.475368] ? asm_exc_page_fault+0x26/0x30
<4>[ 574.475381] ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[ 574.475386] bq_xmit_all+0x158/0x420
<4>[ 574.475397] __dev_flush+0x30/0x90
<4>[ 574.475407] veth_poll+0x216/0x250 [veth]
<4>[ 574.475421] __napi_poll+0x28/0x1c0
<4>[ 574.475430] net_rx_action+0x32d/0x3a0
<4>[ 574.475441] handle_softirqs+0xcb/0x2c0
<4>[ 574.475451] do_softirq+0x40/0x60
<4>[ 574.475458] </IRQ>
<4>[ 574.475461] <TASK>
<4>[ 574.475464] __local_bh_enable_ip+0x66/0x70
<4>[ 574.475471] __dev_queue_xmit+0x268/0xe40
<4>[ 574.475480] ? selinux_ip_postroute+0x213/0x420
<4>[ 574.475491] ? alloc_skb_with_frags+0x4a/0x1d0
<4>[ 574.475502] ip6_finish_output2+0x2be/0x640
<4>[ 574.475512] ? nf_hook_slow+0x42/0xf0
<4>[ 574.475521] ip6_finish_output+0x194/0x300
<4>[ 574.475529] ? __pfx_ip6_finish_output+0x10/0x10
<4>[ 574.475538] mld_sendpack+0x17c/0x240
<4>[ 574.475548] mld_ifc_work+0x192/0x410
<4>[ 574.475557] process_one_work+0x15d/0x380
<4>[ 574.475566] worker_thread+0x29d/0x3a0
<4>[ 574.475573] ? __pfx_worker_thread+0x10/0x10
<4>[ 574.475580] ? __pfx_worker_thread+0x10/0x10
<4>[ 574.475587] kthread+0xcd/0x100
<4>[ 574.475597] ? __pfx_kthread+0x10/0x10
<4>[ 574.475606] ret_from_fork+0x31/0x50
<4>[ 574.475615] ? __pfx_kthread+0x10/0x10
<4>[ 574.475623] ret_from_fork_asm+0x1a/0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the remaining info_cnt before repeating btf fields
When trying to repeat the btf fields for array of nested struct, it
doesn't check the remaining info_cnt. The following splat will be
reported when the value of ret * nelems is greater than BTF_FIELDS_MAX:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49
index 11 is out of range for type 'btf_field_info [11]'
CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_out_of_bounds+0x6f/0x80
? kallsyms_lookup_name+0x48/0xb0
btf_parse_fields+0x992/0xce0
map_create+0x591/0x770
__sys_bpf+0x229/0x2410
__x64_sys_bpf+0x1f/0x30
x64_sys_call+0x199/0x9f0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fea56f2cc5d
......
</TASK>
---[ end trace ]---
Fix it by checking the remaining info_cnt in btf_repeat_fields() before
repeating the btf fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs8409: Fix possible NULL dereference
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then
NULL pointer dereference will occur in the next line.
Since dolphin_fixups function is a hda_fixup function which is not supposed
to return any errors, add simple check before dereference, ignore the fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix out of bound check
Driver exports pacing stats only on GenP5 and P7 adapters. But while
parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This
caused a trace when KASAN is enabled.
BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re]
Write of size 8 at addr ffff8885942a6340 by task modprobe/4809 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()
If the allocation in msm_disp_state_dump_regs() failed then
`block->state` can be NULL. The msm_disp_state_print_regs() function
_does_ have code to try to handle it with:
if (*reg)
dump_addr = *reg;
...but since "dump_addr" is initialized to NULL the above is actually
a noop. The code then goes on to dereference `dump_addr`.
Make the function print "Registers not stored" when it sees a NULL to
solve this. Since we're touching the code, fix
msm_disp_state_print_regs() not to pointlessly take a double-pointer
and properly mark the pointer as `const`.
Patchwork: https://patchwork.freedesktop.org/patch/619657/ |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: use cond_resched() in nsim_dev_trap_report_work()
I am still seeing many syzbot reports hinting that syzbot
might fool nsim_dev_trap_report_work() with hundreds of ports [1]
Lets use cond_resched(), and system_unbound_wq
instead of implicit system_wq.
[1]
INFO: task syz-executor:20633 blocked for more than 143 seconds.
Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:25856 pid:20633 tgid:20633 ppid:1 flags:0x00004006
...
NMI backtrace for cpu 1
CPU: 1 UID: 0 PID: 16760 Comm: kworker/1:0 Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events nsim_dev_trap_report_work
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:210
Code: 89 fb e8 23 00 00 00 48 8b 3d 04 fb 9c 0c 48 89 de 5b e9 c3 c7 5d 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0c 25 c0 d7 03 00 65 8b 15 60 f0
RSP: 0018:ffffc90000a187e8 EFLAGS: 00000246
RAX: 0000000000000100 RBX: ffffc90000a188e0 RCX: ffff888027d3bc00
RDX: ffff888027d3bc00 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88804a2e6000 R08: ffffffff8a4bc495 R09: ffffffff89da3577
R10: 0000000000000004 R11: ffffffff8a4bc2b0 R12: dffffc0000000000
R13: ffff88806573b503 R14: dffffc0000000000 R15: ffff8880663cca00
FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc90a747f98 CR3: 000000000e734000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 000000000000002b DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
spin_unlock_bh include/linux/spinlock.h:396 [inline]
nsim_dev_trap_report drivers/net/netdevsim/dev.c:820 [inline]
nsim_dev_trap_report_work+0x75d/0xaa0 drivers/net/netdevsim/dev.c:850
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
There is a null-ptr-deref issue reported by KASAN:
BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod]
...
kasan_report+0xb9/0xf0
target_alloc_device+0xbc4/0xbe0 [target_core_mod]
core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod]
target_core_init_configfs+0x205/0x420 [target_core_mod]
do_one_initcall+0xdd/0x4e0
...
entry_SYSCALL_64_after_hwframe+0x76/0x7e
In target_alloc_device(), if allocing memory for dev queues fails, then
dev will be freed by dev->transport->free_device(), but dev->transport
is not initialized at that time, which will lead to a null pointer
reference problem.
Fixing this bug by freeing dev with hba->backend->ops->free_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOBs when building SMB2_IOCTL request
When using encryption, either enforced by the server or when using
'seal' mount option, the client will squash all compound request buffers
down for encryption into a single iov in smb2_set_next_command().
SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the
SMB2_IOCTL request in the first iov, and if the user passes an input
buffer that is greater than 328 bytes, smb2_set_next_command() will
end up writing off the end of @rqst->iov[0].iov_base as shown below:
mount.cifs //srv/share /mnt -o ...,seal
ln -s $(perl -e "print('a')for 1..1024") /mnt/link
BUG: KASAN: slab-out-of-bounds in
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
Write of size 4116 at addr ffff8881148fcab8 by task ln/859
CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
print_report+0x156/0x4d9
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
? __virt_addr_valid+0x145/0x310
? __phys_addr+0x46/0x90
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_report+0xda/0x110
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_check_range+0x10f/0x1f0
__asan_memcpy+0x3c/0x60
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
smb2_compound_op+0x238c/0x3840 [cifs]
? kasan_save_track+0x14/0x30
? kasan_save_free_info+0x3b/0x70
? vfs_symlink+0x1a1/0x2c0
? do_symlinkat+0x108/0x1c0
? __pfx_smb2_compound_op+0x10/0x10 [cifs]
? kmem_cache_free+0x118/0x3e0
? cifs_get_writable_path+0xeb/0x1a0 [cifs]
smb2_get_reparse_inode+0x423/0x540 [cifs]
? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? __kmalloc_noprof+0x37c/0x480
? smb2_create_reparse_symlink+0x257/0x490 [cifs]
? smb2_create_reparse_symlink+0x38f/0x490 [cifs]
smb2_create_reparse_symlink+0x38f/0x490 [cifs]
? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs]
? find_held_lock+0x8a/0xa0
? hlock_class+0x32/0xb0
? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs]
cifs_symlink+0x24f/0x960 [cifs]
? __pfx_make_vfsuid+0x10/0x10
? __pfx_cifs_symlink+0x10/0x10 [cifs]
? make_vfsgid+0x6b/0xc0
? generic_permission+0x96/0x2d0
vfs_symlink+0x1a1/0x2c0
do_symlinkat+0x108/0x1c0
? __pfx_do_symlinkat+0x10/0x10
? strncpy_from_user+0xaa/0x160
__x64_sys_symlinkat+0xb9/0xf0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08d75c13bb |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: fix wild-memory-access in proto_unregister
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
<TASK>
__do_sys_delete_module+0x318/0x580
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init()
will cleanup all resource. Then when remove bnep module will call
bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in
bnep_exit(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix command bitmask initialization
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK> |
