| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| It was found that cephx authentication protocol did not verify ceph clients correctly and was vulnerable to replay attack. Any attacker having access to ceph cluster network who is able to sniff packets on network can use this vulnerability to authenticate with ceph service and perform actions allowed by ceph service. Ceph branches master, mimic, luminous and jewel are believed to be vulnerable. |
| An issue was discovered on KT MC01507L Z-Wave S0 devices. It occurs because HPKP is not implemented. The communication architecture is APP > Server > Controller (HUB) > Node (products which are controlled by HUB). The prerequisite is that the attacker is on the same network as the target HUB, and can use IP Changer to change destination IP addresses (of all packets whose destination IP address is Server) to a proxy-server IP address. This allows sniffing of cleartext between Server and Controller. The cleartext command data is transmitted to Controller using the proxy server's fake certificate, and it is able to control each Node of the HUB. Also, by operating HUB in Z-Wave Pairing Mode, it is possible to obtain the Z-Wave network key. |
| The vulnerability have been reported to affect earlier versions of Helpdesk. If exploited, this improper certificate validation vulnerability could allow an attacker to spoof a trusted entity by interfering in the communication path between the host and client. QNAP has already fixed the issue in Helpdesk 3.0.3 and later. |
| In JUUKO K-808, an attacker could specially craft a packet that encodes an arbitrary command, which could be executed on the K-808 (Firmware versions prior to numbers ending ...9A, ...9B, ...9C, etc.). |
| Hetronic Nova-M prior to verson r161 uses fixed codes that are reproducible by sniffing and re-transmission. This can lead to unauthorized replay of a command, spoofing of an arbitrary message, or keeping the controlled load in a permanent "stop" state. |
| A man in the middle vulnerability exists in Jenkins Inedo BuildMaster Plugin 1.3 and earlier in BuildMasterConfiguration.java, BuildMasterConfig.java, BuildMasterApi.java that allows attackers to impersonate any service that Jenkins connects to. |
| A man in the middle vulnerability exists in Jenkins Inedo ProGet Plugin 0.8 and earlier in ProGetApi.java, ProGetConfig.java, ProGetConfiguration.java that allows attackers to impersonate any service that Jenkins connects to. |
| A man in the middle vulnerability exists in Jenkins TraceTronic ECU-TEST Plugin 2.3 and earlier in ATXPublisher.java, ATXValidator.java that allows attackers to impersonate any service that Jenkins connects to. |
| Polycom VVX 500 and 601 devices 5.8.0.12848 and earlier allows man-in-the-middle attackers to obtain sensitive credential information by leveraging failure to validate X.509 certificates when used with an on-premise installation with Skype for Business. |
| AudioCodes 440HD and 450HD devices 3.1.2.89 and earlier allows man-in-the-middle attackers to obtain sensitive credential information by leveraging failure to validate X.509 certificates when used with an on-premise installation with Skype for Business. |
| All versions of Telecrane F25 Series Radio Controls before 00.0A use fixed codes that are reproducible by sniffing and re-transmission. This can lead to unauthorized replay of a command, spoofing of an arbitrary message, or keeping the controlled load in a permanent "stop" state. |
| JUUKO K-800 (Firmware versions prior to numbers ending ...9A, ...9B, ...9C, etc.) is vulnerable to a replay attack and command forgery, which could allow attackers to replay commands, control the device, view commands, or cause the device to stop running. |
| SAGA1-L8B with any firmware versions prior to A0.10 are vulnerable to a replay attack and command forgery. |
| Sennheiser HeadSetup 7.3.4903 places Certification Authority (CA) certificates into the Trusted Root CA store of the local system, and publishes the private key in the SennComCCKey.pem file within the public software distribution, which allows remote attackers to spoof arbitrary web sites or software publishers for several years, even if the HeadSetup product is uninstalled. NOTE: a vulnerability-assessment approach must check all Windows systems for CA certificates with a CN of 127.0.0.1 or SennComRootCA, and determine whether those certificates are unwanted. |
| An information-disclosure issue was discovered in Postman through 6.3.0. It validates a server's X.509 certificate and presents an error if the certificate is not valid. Unfortunately, the associated HTTPS request data is sent anyway. Only the response is not displayed. Thus, all contained information of the HTTPS request is disclosed to a man-in-the-middle attacker (for example, user credentials). |
| The Apache Qpid Proton-J transport includes an optional wrapper layer to perform TLS, enabled by use of the 'transport.ssl(...)' methods. Unless a verification mode was explicitly configured, client and server modes previously defaulted as documented to not verifying a peer certificate, with options to configure this explicitly or select a certificate verification mode with or without hostname verification being performed. The latter hostname verifying mode was not implemented in Apache Qpid Proton-J versions 0.3 to 0.29.0, with attempts to use it resulting in an exception. This left only the option to verify the certificate is trusted, leaving such a client vulnerable to Man In The Middle (MITM) attack. Uses of the Proton-J protocol engine which do not utilise the optional transport TLS wrapper are not impacted, e.g. usage within Qpid JMS. Uses of Proton-J utilising the optional transport TLS wrapper layer that wish to enable hostname verification must be upgraded to version 0.30.0 or later and utilise the VerifyMode#VERIFY_PEER_NAME configuration, which is now the default for client mode usage unless configured otherwise. |
| A replay issue was discovered on Neato Botvac Connected 2.2.0 devices. Manual control mode requires authentication, but once recorded, the authentication (always transmitted in cleartext) can be replayed to /bin/webserver on port 8081. There are no nonces, and timestamps are not checked at all. |
| The crypto/x509 package of Go before 1.10.6 and 1.11.x before 1.11.3 does not limit the amount of work performed for each chain verification, which might allow attackers to craft pathological inputs leading to a CPU denial of service. Go TLS servers accepting client certificates and TLS clients are affected. |
| A deficiency in the access control in module express-cart <=1.1.5 allows unprivileged users to add new users to the application as administrators. |
| An issue was discovered in the OpenSSL library in Ruby before 2.3.8, 2.4.x before 2.4.5, 2.5.x before 2.5.2, and 2.6.x before 2.6.0-preview3. When two OpenSSL::X509::Name objects are compared using ==, depending on the ordering, non-equal objects may return true. When the first argument is one character longer than the second, or the second argument contains a character that is one less than a character in the same position of the first argument, the result of == will be true. This could be leveraged to create an illegitimate certificate that may be accepted as legitimate and then used in signing or encryption operations. |
