| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sudo 1.8.0 through 1.9.12, with the crypt() password backend, contains a plugins/sudoers/auth/passwd.c array-out-of-bounds error that can result in a heap-based buffer over-read. This can be triggered by arbitrary local users with access to Sudo by entering a password of seven characters or fewer. The impact could vary depending on the system libraries, compiler, and processor architecture. |
| "IBM InfoSphere Information Server 11.7 is potentially vulnerable to CSV Injection. A remote attacker could execute arbitrary commands on the system, caused by improper validation of csv file contents. IBM X-Force ID: 223598." |
| A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability. |
| ldebug.c in Lua 5.4.0 allows a negation overflow and segmentation fault in getlocal and setlocal, as demonstrated by getlocal(3,2^31). |
| In drivers/char/virtio_console.c in the Linux kernel before 5.13.4, data corruption or loss can be triggered by an untrusted device that supplies a buf->len value exceeding the buffer size. NOTE: the vendor indicates that the cited data corruption is not a vulnerability in any existing use case; the length validation was added solely for robustness in the face of anomalous host OS behavior |
| Buffer Overflow vulnerability in LibRaw::stretch() function in libraw\src\postprocessing\aspect_ratio.cpp. |
| An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU. |
|
Heap based buffer overflow in HTTP Server functionality in Micrium uC-HTTP 3.01.01 allows remote code execution via HTTP request.
|
| Buffer Overflow vulnerability in FreeImage_Load function in FreeImage Library 3.19.0(r1828) allows attackers to cuase a denial of service via crafted PFM file. |
| Buffer Overflow vulnerability in function LoadPixelDataRLE8 in PluginBMP.cpp in FreeImage 3.18.0 allows remote attackers to run arbitrary code and cause other impacts via crafted image file. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix increasing MSI-X on VF
Increasing MSI-X value on a VF leads to invalid memory operations. This
is caused by not reallocating some arrays.
Reproducer:
modprobe ice
echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe
echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs
echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count
Default MSI-X is 16, so 17 and above triggers this issue.
KASAN reports:
BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
Read of size 8 at addr ffff8888b937d180 by task bash/28433
(...)
Call Trace:
(...)
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
kasan_report+0xed/0x120
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_cfg_def+0x3360/0x4770 [ice]
? mutex_unlock+0x83/0xd0
? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice]
? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vf_reconfig_vsi+0x114/0x210 [ice]
ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice]
sriov_vf_msix_count_store+0x21c/0x300
(...)
Allocated by task 28201:
(...)
ice_vsi_cfg_def+0x1c8e/0x4770 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vsi_setup+0x179/0xa30 [ice]
ice_sriov_configure+0xcaa/0x1520 [ice]
sriov_numvfs_store+0x212/0x390
(...)
To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This
causes the required arrays to be reallocated taking the new queue count
into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq
before ice_vsi_rebuild(), so that realloc uses the newly set queue
count.
Additionally, ice_vsi_rebuild() does not remove VSI filters
(ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer
necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
net: test for not too small csum_start in virtio_net_hdr_to_skb()
syzbot was able to trigger this warning [1], after injecting a
malicious packet through af_packet, setting skb->csum_start and thus
the transport header to an incorrect value.
We can at least make sure the transport header is after
the end of the network header (with a estimated minimal size).
[1]
[ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0
mac=(-1,-1) mac_len=0 net=(16,-6) trans=10
shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0))
csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0
priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0
encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0)
[ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9
[ 67.877764] sk family=17 type=3 proto=0
[ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00
[ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02
[ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00
[ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e
[ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00
[ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.887384] skb frag: 00000100: 00 00
[ 67.887878] ------------[ cut here ]------------
[ 67.887908] offset (-6) >= skb_headlen() (14)
[ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2))
[ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs
[ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011
[ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2))
[ 67.891043] Call Trace:
[ 67.891173] <TASK>
[ 67.891274] ? __warn (kernel/panic.c:741)
[ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2))
[ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219)
[ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239)
[ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
[ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
[ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2))
[ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2))
[ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1))
[ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 ne
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm: vmalloc: ensure vmap_block is initialised before adding to queue
Commit 8c61291fd850 ("mm: fix incorrect vbq reference in
purge_fragmented_block") extended the 'vmap_block' structure to contain a
'cpu' field which is set at allocation time to the id of the initialising
CPU.
When a new 'vmap_block' is being instantiated by new_vmap_block(), the
partially initialised structure is added to the local 'vmap_block_queue'
xarray before the 'cpu' field has been initialised. If another CPU is
concurrently walking the xarray (e.g. via vm_unmap_aliases()), then it
may perform an out-of-bounds access to the remote queue thanks to an
uninitialised index.
This has been observed as UBSAN errors in Android:
| Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
|
| Call trace:
| purge_fragmented_block+0x204/0x21c
| _vm_unmap_aliases+0x170/0x378
| vm_unmap_aliases+0x1c/0x28
| change_memory_common+0x1dc/0x26c
| set_memory_ro+0x18/0x24
| module_enable_ro+0x98/0x238
| do_init_module+0x1b0/0x310
Move the initialisation of 'vb->cpu' in new_vmap_block() ahead of the
addition to the xarray. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix prime with external buffers
Make sure that for external buffers mapping goes through the dma_buf
interface instead of trying to access pages directly.
External buffers might not provide direct access to readable/writable
pages so to make sure the bo's created from external dma_bufs can be
read dma_buf interface has to be used.
Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't
trigger this due to the fact that virtual machines will not have
multiple GPUs but it enables better test coverage in IGT. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix overflow check in adjust_jmp_off()
adjust_jmp_off() incorrectly used the insn->imm field for all overflow check,
which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case,
not the general jump instruction case. Fix it by using insn->off for overflow
check in the general case. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Ignore too large handle values in BIG
hci_le_big_sync_established_evt is necessary to filter out cases where the
handle value is belonging to ida id range, otherwise ida will be erroneously
released in hci_conn_cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Add a timeout to acquire the command queue semaphore
Prevent forced completion handling on an entry that has not yet been
assigned an index, causing an out of bounds access on idx = -22.
Instead of waiting indefinitely for the sem, blocking flow now waits for
index to be allocated or a sem acquisition timeout before beginning the
timer for FW completion.
Kernel log example:
mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
Unfortunately the commit `fd8958efe877` introduced another error
causing the `descs` array to overflow. This reults in further crashes
easily reproducible by `sendmsg` system call.
[ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI
[ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1]
--
[ 1080.974535] Call Trace:
[ 1080.976990] <TASK>
[ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1]
[ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1]
[ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1]
[ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib]
[ 1081.046978] dev_hard_start_xmit+0xc4/0x210
--
[ 1081.148347] __sys_sendmsg+0x59/0xa0
crash> ipoib_txreq 0xffff9cfeba229f00
struct ipoib_txreq {
txreq = {
list = {
next = 0xffff9cfeba229f00,
prev = 0xffff9cfeba229f00
},
descp = 0xffff9cfeba229f40,
coalesce_buf = 0x0,
wait = 0xffff9cfea4e69a48,
complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>,
packet_len = 0x46d,
tlen = 0x0,
num_desc = 0x0,
desc_limit = 0x6,
next_descq_idx = 0x45c,
coalesce_idx = 0x0,
flags = 0x0,
descs = {{
qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63)
}, {
qw = { 0x3800014231b108, 0x4}
}, {
qw = { 0x310000e4ee0fcf0, 0x8}
}, {
qw = { 0x3000012e9f8000, 0x8}
}, {
qw = { 0x59000dfb9d0000, 0x8}
}, {
qw = { 0x78000e02e40000, 0x8}
}}
},
sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure
sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62)
complete = 0x0,
priv = 0x0,
txq = 0xffff9cfea4e69880,
skb = 0xffff9d099809f400
}
If an SDMA send consists of exactly 6 descriptors and requires dword
padding (in the 7th descriptor), the sdma_txreq descriptor array is not
properly expanded and the packet will overflow into the container
structure. This results in a panic when the send completion runs. The
exact panic varies depending on what elements of the container structure
get corrupted. The fix is to use the correct expression in
_pad_sdma_tx_descs() to test the need to expand the descriptor array.
With this patch the crashes are no longer reproducible and the machine is
stable. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: pass correct message length to ip6_append_data
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Fix out-of-bounds memory access
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package. |
