| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: tcon: Drop TCON TOP device reference
of_find_device_by_node() takes a device reference. Drop it after mux
configuration succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold QP references for AE and CM processing
AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa
and then use or reference them outside the xarray lock.
erdma_destroy_qp() can drop the destroy-path reference and free QP
resources while such a lookup is in flight.
Add erdma_qp_get_by_qpn() to acquire a kref under the xarray
lock with kref_get_unless_zero(). Remove the QP from the xarray
before dropping the destroy-path reference so no new lookup can acquire
it while destruction waits for existing users. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Reject short reads
Steam Controller FEATURE reports encode the size of the message in the
message itself. Previously we were trusting that the size reported matched
the size we actually read, leading to a potential issue with short reads.
Instead, we should actually verify the length of the read. |
| The LiteSpeed Cache plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'esi' parameter in all versions up to, and including, 7.9 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires that the attacker supply a validly signed 'esi' value in the GET query string while submitting a separate attacker-controlled 'esi' payload as a POST body field, relying on PHP's default $_REQUEST merge order to have the POST value take precedence at the point of execution. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix UAF in ODP init error-handling path
rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before
calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails,
rxe_odp_mr_init_user() releases umem_odp and returns an error.
rxe_reg_user_mr() then unwinds the error through rxe_cleanup(),
rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an
IS_ERR_OR_NULL(umem) check at the start of ib_umem_release().
But since mr->umem is NOT reset to NULL in the error handling
path of rxe_odp_mr_init_user(), the check passes and it reads
already-freed fields like umem->is_dmabuf, causing UAF.
Fix the UAF by clearing mr->umem after releasing the failed
ODP umem so the MR cleanup path does not release it again. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Propagate sdma_txinit_ahg() errors
set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg().
If sdma_txinit_ahg() fails, it returns before initializing tx->txreq.
However, set_txreq_header_ahg() ignores the error and returns the AHG
change count, causing the caller to continue processing the request as
though initialization had succeeded.
Propagate sdma_txinit_ahg() failures to the caller and abort request
processing when initialization fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init
A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from
the destroy callback and from the init-failure unwind in the alloc handler.
It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but
nothing serializes that against the error interrupt: tegra241_cmdqv_isr()
reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can
make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is
about to be freed (a use-after-free).
deinit_vintf() also returns idx to the IDA before clearing the slot, so a
concurrent create that reuses idx can publish its new vintf into the slot,
only for this teardown to erase it again with the stale NULL store.
On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a
plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of
a published vintf such as vintf->base. A plain store gives no ordering on a
weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make
the ISR pick a vintf the moment it is published, before its fields are set
or tegra241_vintf_hw_init() runs.
The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures()
first creates VINTF0, so the slot 0 read needs the same NULL check.
Publish every slot with an smp_store_release(), and read each slot in the
ISR with an smp_load_acquire() under a NULL check, so the ISR always sees
a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and
synchronize_irq() prior to returning idx to the IDA, so no vintf is freed
under a running handler and no reused idx is clobbered. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: int3400: clean up ODVP on probe failures
evaluate_odvp() creates per-ODVP sysfs files before the thermal zone
and later probe resources are registered. The current unwind path only
calls cleanup_odvp() from the late sysfs failure path, so failures after
evaluate_odvp() but before that label, including
thermal_tripless_zone_device_register() failures, leave the ODVP files
and storage behind.
Move the ODVP cleanup to the common ART/TRT unwind path so every failure
after evaluate_odvp() releases the ODVP state. Also clear the cached
ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call
it for partial setup failures while probe continues. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_destroy_cq_user()
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_cq_user(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_cq_user(), ensuring that the CQ is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a CQ that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of input during web page generation. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of input during web page generation. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to bypass security restrictions due to improper authorization. |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread name.
A corrupted image can therefore provide an oversized thread name length
and make hfs_bnode_read() write past the catalog search-key allocation.
Read the CNID record through hfsplus_brec_read_cat(), which bounds the
record read to sizeof(hfsplus_cat_entry) and verifies that a thread
record's size exactly matches nodeName.length. Together, these checks
ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread
records before building the delete key from the validated thread name.
Share the thread-record-type helper between hfsplus_find_cat() and
hfsplus_delete_cat(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths
The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation
failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which
calls dma_fence_put() on the fence. However, at that point the fence has
only been kmalloc'd — dma_fence_init() has not been called yet, so the
refcount and the fence ops are uninitialized. Calling dma_fence_put() on
such an object leads to undefined behavior.
Use kfree() instead, since the fence is just a plain allocation at this
stage, and rename the label to err_fence_free to reflect the actual
cleanup action. |
| NUUO Network Video Recorder 2.0.0 is vulnerable to Command Injection in handle_import_privilege.php. |
| Cotonti through 1.0.0 derives password recovery validation tokens from md5(microtime()) in users.passrecover.php, creating a predictable token space of approximately one million values per second. Unauthenticated attackers can read the server Date header, precompute candidate tokens within a narrow time window, and probe them against the passrecover authentication endpoint to reset any account password including administrators. |
| The Pochipp plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'keyword' parameter in versions up to, and including, 1.20.2. This is due to insufficient output escaping , which reads $_GET['keyword'], applies only sanitize_text_field() (which strips tags but leaves double quotes intact) and interpolates the value directly into the value attribute of the search input via a PHP heredoc, without esc_attr(). This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user with upload_files capability (Author or above) into performing an action such as clicking on a specially crafted link to /wp-admin/media-upload. |
