Filtered by vendor Netapp
Subscriptions
Filtered by product H300e
Subscriptions
Total
150 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-1434 | 2 Netapp, Openssl | 43 A250, A250 Firmware, A700s and 40 more | 2024-09-17 | 5.9 Medium |
| The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the AAD data as the MAC key. This makes the MAC key trivially predictable. An attacker could exploit this issue by performing a man-in-the-middle attack to modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that the modified data would still pass the MAC integrity check. Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint will always be rejected by the recipient and the connection will fail at that point. Many application protocols require data to be sent from the client to the server first. Therefore, in such a case, only an OpenSSL 3.0 server would be impacted when talking to a non-OpenSSL 3.0 client. If both endpoints are OpenSSL 3.0 then the attacker could modify data being sent in both directions. In this case both clients and servers could be affected, regardless of the application protocol. Note that in the absence of an attacker this bug means that an OpenSSL 3.0 endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the handshake when using this ciphersuite. The confidentiality of data is not impacted by this issue, i.e. an attacker cannot decrypt data that has been encrypted using this ciphersuite - they can only modify it. In order for this attack to work both endpoints must legitimately negotiate the RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0, and is not available within the default provider or the default ciphersuite list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must have occurred: 1) OpenSSL must have been compiled with the (non-default) compile time option enable-weak-ssl-ciphers 2) OpenSSL must have had the legacy provider explicitly loaded (either through application code or via configuration) 3) The ciphersuite must have been explicitly added to the ciphersuite list 4) The libssl security level must have been set to 0 (default is 1) 5) A version of SSL/TLS below TLSv1.3 must have been negotiated 6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any others that both endpoints have in common Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | ||||
| CVE-2022-1343 | 3 Netapp, Openssl, Redhat | 44 A250, A250 Firmware, A700s and 41 more | 2024-09-17 | 5.3 Medium |
| The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | ||||
| CVE-2021-4044 | 3 Netapp, Nodejs, Openssl | 26 500f, 500f Firmware, A250 and 23 more | 2024-09-17 | 7.5 High |
| Internally libssl in OpenSSL calls X509_verify_cert() on the client side to verify a certificate supplied by a server. That function may return a negative return value to indicate an internal error (for example out of memory). Such a negative return value is mishandled by OpenSSL and will cause an IO function (such as SSL_connect() or SSL_do_handshake()) to not indicate success and a subsequent call to SSL_get_error() to return the value SSL_ERROR_WANT_RETRY_VERIFY. This return value is only supposed to be returned by OpenSSL if the application has previously called SSL_CTX_set_cert_verify_callback(). Since most applications do not do this the SSL_ERROR_WANT_RETRY_VERIFY return value from SSL_get_error() will be totally unexpected and applications may not behave correctly as a result. The exact behaviour will depend on the application but it could result in crashes, infinite loops or other similar incorrect responses. This issue is made more serious in combination with a separate bug in OpenSSL 3.0 that will cause X509_verify_cert() to indicate an internal error when processing a certificate chain. This will occur where a certificate does not include the Subject Alternative Name extension but where a Certificate Authority has enforced name constraints. This issue can occur even with valid chains. By combining the two issues an attacker could induce incorrect, application dependent behaviour. Fixed in OpenSSL 3.0.1 (Affected 3.0.0). | ||||
| CVE-2020-8832 | 2 Canonical, Netapp | 60 Ubuntu Linux, Aff 8300, Aff 8300 Firmware and 57 more | 2024-09-17 | 5.5 Medium |
| The fix for the Linux kernel in Ubuntu 18.04 LTS for CVE-2019-14615 ("The Linux kernel did not properly clear data structures on context switches for certain Intel graphics processors.") was discovered to be incomplete, meaning that in versions of the kernel before 4.15.0-91.92, an attacker could use this vulnerability to expose sensitive information. | ||||
| CVE-2022-0635 | 2 Isc, Netapp | 17 Bind, H300e, H300e Firmware and 14 more | 2024-09-17 | 7.5 High |
| Versions affected: BIND 9.18.0 When a vulnerable version of named receives a series of specific queries, the named process will eventually terminate due to a failed assertion check. | ||||
| CVE-2020-8835 | 4 Canonical, Fedoraproject, Linux and 1 more | 47 Ubuntu Linux, Fedora, Linux Kernel and 44 more | 2024-09-17 | 7.8 High |
| In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780) | ||||
| CVE-2021-25214 | 6 Debian, Fedoraproject, Isc and 3 more | 25 Debian Linux, Fedora, Bind and 22 more | 2024-09-17 | 6.5 Medium |
| In BIND 9.8.5 -> 9.8.8, 9.9.3 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.9.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND 9 Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.11 of the BIND 9.17 development branch, when a vulnerable version of named receives a malformed IXFR triggering the flaw described above, the named process will terminate due to a failed assertion the next time the transferred secondary zone is refreshed. | ||||
| CVE-2021-22543 | 5 Debian, Fedoraproject, Linux and 2 more | 29 Debian Linux, Fedora, Linux Kernel and 26 more | 2024-09-16 | 7.8 High |
| An issue was discovered in Linux: KVM through Improper handling of VM_IO|VM_PFNMAP vmas in KVM can bypass RO checks and can lead to pages being freed while still accessible by the VMM and guest. This allows users with the ability to start and control a VM to read/write random pages of memory and can result in local privilege escalation. | ||||
| CVE-2021-25216 | 4 Debian, Isc, Netapp and 1 more | 23 Debian Linux, Bind, Active Iq Unified Manager and 20 more | 2024-09-16 | 8.1 High |
| In BIND 9.5.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.11.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch, BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting values for the tkey-gssapi-keytab or tkey-gssapi-credential configuration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. For servers that meet these conditions, the ISC SPNEGO implementation is vulnerable to various attacks, depending on the CPU architecture for which BIND was built: For named binaries compiled for 64-bit platforms, this flaw can be used to trigger a buffer over-read, leading to a server crash. For named binaries compiled for 32-bit platforms, this flaw can be used to trigger a server crash due to a buffer overflow and possibly also to achieve remote code execution. We have determined that standard SPNEGO implementations are available in the MIT and Heimdal Kerberos libraries, which support a broad range of operating systems, rendering the ISC implementation unnecessary and obsolete. Therefore, to reduce the attack surface for BIND users, we will be removing the ISC SPNEGO implementation in the April releases of BIND 9.11 and 9.16 (it had already been dropped from BIND 9.17). We would not normally remove something from a stable ESV (Extended Support Version) of BIND, but since system libraries can replace the ISC SPNEGO implementation, we have made an exception in this case for reasons of stability and security. | ||||
| CVE-2022-1292 | 6 Debian, Fedoraproject, Netapp and 3 more | 57 Debian Linux, Fedora, A250 and 54 more | 2024-09-16 | 9.8 Critical |
| The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). | ||||
| CVE-2022-0667 | 2 Isc, Netapp | 17 Bind, H300e, H300e Firmware and 14 more | 2024-09-16 | 7.5 High |
| When the vulnerability is triggered the BIND process will exit. BIND 9.18.0 | ||||
| CVE-2021-25215 | 7 Debian, Fedoraproject, Isc and 4 more | 31 Debian Linux, Fedora, Bind and 28 more | 2024-09-16 | 7.5 High |
| In BIND 9.0.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.9.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.11 of the BIND 9.17 development branch, when a vulnerable version of named receives a query for a record triggering the flaw described above, the named process will terminate due to a failed assertion check. The vulnerability affects all currently maintained BIND 9 branches (9.11, 9.11-S, 9.16, 9.16-S, 9.17) as well as all other versions of BIND 9. | ||||
| CVE-2022-0396 | 5 Fedoraproject, Isc, Netapp and 2 more | 20 Fedora, Bind, H300e and 17 more | 2024-09-16 | 5.3 Medium |
| BIND 9.16.11 -> 9.16.26, 9.17.0 -> 9.18.0 and versions 9.16.11-S1 -> 9.16.26-S1 of the BIND Supported Preview Edition. Specifically crafted TCP streams can cause connections to BIND to remain in CLOSE_WAIT status for an indefinite period of time, even after the client has terminated the connection. | ||||
| CVE-2021-23133 | 6 Broadcom, Debian, Fedoraproject and 3 more | 25 Brocade Fabric Operating System, Debian Linux, Fedora and 22 more | 2024-09-16 | 6.7 Medium |
| A race condition in Linux kernel SCTP sockets (net/sctp/socket.c) before 5.12-rc8 can lead to kernel privilege escalation from the context of a network service or an unprivileged process. If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock then an element is removed from the auto_asconf_splist list without any proper locking. This can be exploited by an attacker with network service privileges to escalate to root or from the context of an unprivileged user directly if a BPF_CGROUP_INET_SOCK_CREATE is attached which denies creation of some SCTP socket. | ||||
| CVE-2022-1473 | 3 Netapp, Openssl, Redhat | 44 A250, A250 Firmware, A700s and 41 more | 2024-09-16 | 7.5 High |
| The OPENSSL_LH_flush() function, which empties a hash table, contains a bug that breaks reuse of the memory occuppied by the removed hash table entries. This function is used when decoding certificates or keys. If a long lived process periodically decodes certificates or keys its memory usage will expand without bounds and the process might be terminated by the operating system causing a denial of service. Also traversing the empty hash table entries will take increasingly more time. Typically such long lived processes might be TLS clients or TLS servers configured to accept client certificate authentication. The function was added in the OpenSSL 3.0 version thus older releases are not affected by the issue. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | ||||
| CVE-2021-25219 | 7 Debian, Fedoraproject, Isc and 4 more | 24 Debian Linux, Fedora, Bind and 21 more | 2024-09-16 | 5.3 Medium |
| In BIND 9.3.0 -> 9.11.35, 9.12.0 -> 9.16.21, and versions 9.9.3-S1 -> 9.11.35-S1 and 9.16.8-S1 -> 9.16.21-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.18 of the BIND 9.17 development branch, exploitation of broken authoritative servers using a flaw in response processing can cause degradation in BIND resolver performance. The way the lame cache is currently designed makes it possible for its internal data structures to grow almost infinitely, which may cause significant delays in client query processing. | ||||
| CVE-2021-25220 | 6 Fedoraproject, Isc, Juniper and 3 more | 50 Fedora, Bind, Junos and 47 more | 2024-09-16 | 6.8 Medium |
| BIND 9.11.0 -> 9.11.36 9.12.0 -> 9.16.26 9.17.0 -> 9.18.0 BIND Supported Preview Editions: 9.11.4-S1 -> 9.11.36-S1 9.16.8-S1 -> 9.16.26-S1 Versions of BIND 9 earlier than those shown - back to 9.1.0, including Supported Preview Editions - are also believed to be affected but have not been tested as they are EOL. The cache could become poisoned with incorrect records leading to queries being made to the wrong servers, which might also result in false information being returned to clients. | ||||
| CVE-2022-0185 | 3 Linux, Netapp, Redhat | 20 Linux Kernel, H300e, H300e Firmware and 17 more | 2024-09-04 | 8.4 High |
| A heap-based buffer overflow flaw was found in the way the legacy_parse_param function in the Filesystem Context functionality of the Linux kernel verified the supplied parameters length. An unprivileged (in case of unprivileged user namespaces enabled, otherwise needs namespaced CAP_SYS_ADMIN privilege) local user able to open a filesystem that does not support the Filesystem Context API (and thus fallbacks to legacy handling) could use this flaw to escalate their privileges on the system. | ||||
| CVE-2017-5123 | 2 Linux, Netapp | 16 Linux Kernel, Cloud Backup, H300e and 13 more | 2024-08-05 | 8.8 High |
| Insufficient data validation in waitid allowed an user to escape sandboxes on Linux. | ||||
| CVE-2018-25020 | 2 Linux, Netapp | 18 Linux Kernel, Cloud Backup, H300e and 15 more | 2024-08-05 | 7.8 High |
| The BPF subsystem in the Linux kernel before 4.17 mishandles situations with a long jump over an instruction sequence where inner instructions require substantial expansions into multiple BPF instructions, leading to an overflow. This affects kernel/bpf/core.c and net/core/filter.c. | ||||