Filtered by vendor Tenable
Subscriptions
Total
141 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2020-7065 | 5 Canonical, Debian, Php and 2 more | 6 Ubuntu Linux, Debian Linux, Php and 3 more | 2024-09-17 | 7.4 High |
| In PHP versions 7.3.x below 7.3.16 and 7.4.x below 7.4.4, while using mb_strtolower() function with UTF-32LE encoding, certain invalid strings could cause PHP to overwrite stack-allocated buffer. This could lead to memory corruption, crashes and potentially code execution. | ||||
| CVE-2019-1559 | 13 Canonical, Debian, F5 and 10 more | 91 Ubuntu Linux, Debian Linux, Big-ip Access Policy Manager and 88 more | 2024-09-17 | 5.9 Medium |
| If an application encounters a fatal protocol error and then calls SSL_shutdown() twice (once to send a close_notify, and once to receive one) then OpenSSL can respond differently to the calling application if a 0 byte record is received with invalid padding compared to if a 0 byte record is received with an invalid MAC. If the application then behaves differently based on that in a way that is detectable to the remote peer, then this amounts to a padding oracle that could be used to decrypt data. In order for this to be exploitable "non-stitched" ciphersuites must be in use. Stitched ciphersuites are optimised implementations of certain commonly used ciphersuites. Also the application must call SSL_shutdown() twice even if a protocol error has occurred (applications should not do this but some do anyway). Fixed in OpenSSL 1.0.2r (Affected 1.0.2-1.0.2q). | ||||
| CVE-2018-1148 | 1 Tenable | 1 Nessus | 2024-09-17 | N/A |
| In Nessus before 7.1.0, Session Fixation exists due to insufficient session management within the application. An authenticated attacker could maintain system access due to session fixation after a user password change. | ||||
| CVE-2020-7069 | 9 Canonical, Debian, Fedoraproject and 6 more | 10 Ubuntu Linux, Debian Linux, Fedora and 7 more | 2024-09-17 | 5.4 Medium |
| In PHP versions 7.2.x below 7.2.34, 7.3.x below 7.3.23 and 7.4.x below 7.4.11, when AES-CCM mode is used with openssl_encrypt() function with 12 bytes IV, only first 7 bytes of the IV is actually used. This can lead to both decreased security and incorrect encryption data. | ||||
| CVE-2021-23358 | 5 Debian, Fedoraproject, Redhat and 2 more | 6 Debian Linux, Fedora, Acm and 3 more | 2024-09-17 | 3.3 Low |
| The package underscore from 1.13.0-0 and before 1.13.0-2, from 1.3.2 and before 1.12.1 are vulnerable to Arbitrary Code Injection via the template function, particularly when a variable property is passed as an argument as it is not sanitized. | ||||
| CVE-2021-3449 | 13 Checkpoint, Debian, Fedoraproject and 10 more | 172 Multi-domain Management, Multi-domain Management Firmware, Quantum Security Gateway and 169 more | 2024-09-17 | 5.9 Medium |
| An OpenSSL TLS server may crash if sent a maliciously crafted renegotiation ClientHello message from a client. If a TLSv1.2 renegotiation ClientHello omits the signature_algorithms extension (where it was present in the initial ClientHello), but includes a signature_algorithms_cert extension then a NULL pointer dereference will result, leading to a crash and a denial of service attack. A server is only vulnerable if it has TLSv1.2 and renegotiation enabled (which is the default configuration). OpenSSL TLS clients are not impacted by this issue. All OpenSSL 1.1.1 versions are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1-1.1.1j). | ||||
| CVE-2021-21707 | 5 Debian, Netapp, Php and 2 more | 6 Debian Linux, Clustered Data Ontap, Php and 3 more | 2024-09-17 | 5.3 Medium |
| In PHP versions 7.3.x below 7.3.33, 7.4.x below 7.4.26 and 8.0.x below 8.0.13, certain XML parsing functions, like simplexml_load_file(), URL-decode the filename passed to them. If that filename contains URL-encoded NUL character, this may cause the function to interpret this as the end of the filename, thus interpreting the filename differently from what the user intended, which may lead it to reading a different file than intended. | ||||
| CVE-2017-11506 | 1 Tenable | 1 Nessus | 2024-09-17 | N/A |
| When linking a Nessus scanner or agent to Tenable.io or other manager, Nessus 6.x before 6.11 does not verify the manager's TLS certificate when making the initial outgoing connection. This could allow man-in-the-middle attacks. | ||||
| CVE-2020-7060 | 6 Debian, Opensuse, Oracle and 3 more | 7 Debian Linux, Leap, Communications Diameter Signaling Router and 4 more | 2024-09-17 | 6.5 Medium |
| When using certain mbstring functions to convert multibyte encodings, in PHP versions 7.2.x below 7.2.27, 7.3.x below 7.3.14 and 7.4.x below 7.4.2 it is possible to supply data that will cause function mbfl_filt_conv_big5_wchar to read past the allocated buffer. This may lead to information disclosure or crash. | ||||
| CVE-2018-1142 | 1 Tenable | 1 Appliance | 2024-09-17 | N/A |
| Tenable Appliance versions 4.6.1 and earlier have been found to contain a single XSS vulnerability. Utilizing a specially crafted request, an authenticated attacker could potentially execute arbitrary JavaScript code by manipulating certain URL parameters related to offline plugins. | ||||
| CVE-2020-1967 | 10 Broadcom, Debian, Fedoraproject and 7 more | 26 Fabric Operating System, Debian Linux, Fedora and 23 more | 2024-09-17 | 7.5 High |
| Server or client applications that call the SSL_check_chain() function during or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a result of incorrect handling of the "signature_algorithms_cert" TLS extension. The crash occurs if an invalid or unrecognised signature algorithm is received from the peer. This could be exploited by a malicious peer in a Denial of Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this issue. This issue did not affect OpenSSL versions prior to 1.1.1d. Fixed in OpenSSL 1.1.1g (Affected 1.1.1d-1.1.1f). | ||||
| CVE-2021-3450 | 11 Fedoraproject, Freebsd, Mcafee and 8 more | 39 Fedora, Freebsd, Web Gateway and 36 more | 2024-09-17 | 7.4 High |
| The X509_V_FLAG_X509_STRICT flag enables additional security checks of the certificates present in a certificate chain. It is not set by default. Starting from OpenSSL version 1.1.1h a check to disallow certificates in the chain that have explicitly encoded elliptic curve parameters was added as an additional strict check. An error in the implementation of this check meant that the result of a previous check to confirm that certificates in the chain are valid CA certificates was overwritten. This effectively bypasses the check that non-CA certificates must not be able to issue other certificates. If a "purpose" has been configured then there is a subsequent opportunity for checks that the certificate is a valid CA. All of the named "purpose" values implemented in libcrypto perform this check. Therefore, where a purpose is set the certificate chain will still be rejected even when the strict flag has been used. A purpose is set by default in libssl client and server certificate verification routines, but it can be overridden or removed by an application. In order to be affected, an application must explicitly set the X509_V_FLAG_X509_STRICT verification flag and either not set a purpose for the certificate verification or, in the case of TLS client or server applications, override the default purpose. OpenSSL versions 1.1.1h and newer are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1h-1.1.1j). | ||||
| CVE-2020-1971 | 9 Debian, Fedoraproject, Netapp and 6 more | 55 Debian Linux, Fedora, Active Iq Unified Manager and 52 more | 2024-09-17 | 5.9 Medium |
| The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an attacker can control both items being compared then that attacker could trigger a crash. For example if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL's s_server, s_client and verify tools have support for the "-crl_download" option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w). | ||||
| CVE-2014-2848 | 1 Tenable | 2 Nessus, Plugin-set | 2024-09-17 | N/A |
| A race condition in the wmi_malware_scan.nbin plugin before 201402262215 for Nessus 5.2.1 allows local users to gain privileges by replacing the dissolvable agent executable in the Windows temp directory with a Trojan horse program. | ||||
| CVE-2020-7059 | 6 Debian, Opensuse, Oracle and 3 more | 7 Debian Linux, Leap, Communications Diameter Signaling Router and 4 more | 2024-09-17 | 6.5 Medium |
| When using fgetss() function to read data with stripping tags, in PHP versions 7.2.x below 7.2.27, 7.3.x below 7.3.14 and 7.4.x below 7.4.2 it is possible to supply data that will cause this function to read past the allocated buffer. This may lead to information disclosure or crash. | ||||
| CVE-2020-7067 | 4 Debian, Oracle, Php and 1 more | 4 Debian Linux, Communications Diameter Signaling Router, Php and 1 more | 2024-09-17 | 7.5 High |
| In PHP versions 7.2.x below 7.2.30, 7.3.x below 7.3.17 and 7.4.x below 7.4.5, if PHP is compiled with EBCDIC support (uncommon), urldecode() function can be made to access locations past the allocated memory, due to erroneously using signed numbers as array indexes. | ||||
| CVE-2021-23840 | 8 Debian, Fujitsu, Mcafee and 5 more | 31 Debian Linux, M10-1, M10-1 Firmware and 28 more | 2024-09-17 | 7.5 High |
| Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument in some cases where the input length is close to the maximum permissable length for an integer on the platform. In such cases the return value from the function call will be 1 (indicating success), but the output length value will be negative. This could cause applications to behave incorrectly or crash. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). | ||||
| CVE-2019-11042 | 7 Apple, Canonical, Debian and 4 more | 9 Mac Os X, Ubuntu Linux, Debian Linux and 6 more | 2024-09-17 | 7.1 High |
| When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.1.x below 7.1.31, 7.2.x below 7.2.21 and 7.3.x below 7.3.8 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash. | ||||
| CVE-2019-3923 | 1 Tenable | 1 Nessus | 2024-09-17 | N/A |
| Nessus versions 8.2.1 and earlier were found to contain a stored XSS vulnerability due to improper validation of user-supplied input. An authenticated, remote attacker could potentially exploit this vulnerability via a specially crafted request to execute arbitrary script code in a user's browser session. Tenable has released Nessus 8.2.2 to address this issue. | ||||
| CVE-2013-5911 | 1 Tenable | 1 Securitycenter | 2024-09-17 | N/A |
| Cross-site scripting (XSS) vulnerability in devform.php in Tenable SecurityCenter 4.6 through 4.7 allows remote attackers to inject arbitrary web script or HTML via the message parameter. | ||||