Total
22 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38428 | 2 Gnu, Redhat | 6 Wget, Enterprise Linux, Rhel Aus and 3 more | 2024-11-15 | 9.1 Critical |
| url.c in GNU Wget through 1.24.5 mishandles semicolons in the userinfo subcomponent of a URI, and thus there may be insecure behavior in which data that was supposed to be in the userinfo subcomponent is misinterpreted to be part of the host subcomponent. | ||||
| CVE-2021-1587 | 1 Cisco | 63 Nexus 3000, Nexus 3048, Nexus 31108pc-v and 60 more | 2024-11-07 | 8.6 High |
| A vulnerability in the VXLAN Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific packets with a Transparent Interconnection of Lots of Links (TRILL) OAM EtherType. An attacker could exploit this vulnerability by sending crafted packets, including the TRILL OAM EtherType of 0x8902, to a device that is part of a VXLAN Ethernet VPN (EVPN) fabric. A successful exploit could allow the attacker to cause an affected device to experience high CPU usage and consume excessive system resources, which may result in overall control plane instability and cause the affected device to reload. Note: The NGOAM feature is disabled by default. | ||||
| CVE-2022-20915 | 1 Cisco | 1 Ios Xe | 2024-11-01 | 7.4 High |
| A vulnerability in the implementation of IPv6 VPN over MPLS (6VPE) with Zone-Based Firewall (ZBFW) of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error handling of an IPv6 packet that is forwarded from an MPLS and ZBFW-enabled interface in a 6VPE deployment. An attacker could exploit this vulnerability by sending a crafted IPv6 packet sourced from a device on the IPv6-enabled virtual routing and forwarding (VRF) interface through the affected device. A successful exploit could allow the attacker to reload the device, resulting in a DoS condition. | ||||
| CVE-2024-2004 | 1 Redhat | 1 Jboss Core Services | 2024-10-29 | 3.5 Low |
| When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled. curl --proto -all,-http http://curl.se The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug. | ||||
| CVE-2020-29511 | 2 Golang, Netapp | 2 Go, Trident | 2024-09-17 | 9.8 Critical |
| The encoding/xml package in Go (all versions) does not correctly preserve the semantics of element namespace prefixes during tokenization round-trips, which allows an attacker to craft inputs that behave in conflicting ways during different stages of processing in affected downstream applications. | ||||
| CVE-2020-29509 | 2 Golang, Netapp | 2 Go, Trident | 2024-09-17 | 9.8 Critical |
| The encoding/xml package in Go (all versions) does not correctly preserve the semantics of attribute namespace prefixes during tokenization round-trips, which allows an attacker to craft inputs that behave in conflicting ways during different stages of processing in affected downstream applications. | ||||
| CVE-2021-0207 | 1 Juniper | 14 Ex2300, Ex3400, Ex4300 and 11 more | 2024-09-17 | 7.5 High |
| An improper interpretation conflict of certain data between certain software components within the Juniper Networks Junos OS devices does not allow certain traffic to pass through the device upon receipt from an ingress interface filtering certain specific types of traffic which is then being redirected to an egress interface on a different VLAN. This causes a Denial of Service (DoS) to those clients sending these particular types of traffic. Such traffic being sent by a client may appear genuine, but is non-standard in nature and should be considered as potentially malicious, and can be targeted to the device, or destined through it for the issue to occur. This issues affects IPv4 and IPv6 traffic. An indicator of compromise may be found by checking log files. You may find that traffic on the input interface has 100% of traffic flowing into the device, yet the egress interface shows 0 pps leaving the device. For example: [show interfaces "interface" statistics detail] Output between two interfaces would reveal something similar to: Ingress, first interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/0 Up 9999999999 (9999) 1 (0) -------------------- Egress, second interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 0 (0) 9999999999 (0) -------------------- Dropped packets will not show up in DDoS monitoring/protection counters as issue is not caused by anti-DDoS protection mechanisms. This issue affects: Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S7 on NFX250, QFX5K Series, EX4600; 17.4 versions prior to 17.4R2-S11, 17.4R3-S3 on NFX250, QFX5K Series, EX4600; 18.1 versions prior to 18.1R3-S9 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4600; 18.2 versions prior to 18.2R3-S3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600; 18.3 versions prior to 18.3R3-S1 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.2 versions prior to 19.2R1-S5, 19.2R2 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.3 versions prior to 19.3R2-S3, 19.3R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.4 versions prior to 19.4R1-S2, 19.4R2 on NFX250, NFX350, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series. This issue does not affect Junos OS releases prior to 17.2R2. | ||||
| CVE-2018-7159 | 2 Nodejs, Redhat | 3 Node.js, Enterprise Linux, Rhel Software Collections | 2024-09-17 | 5.3 Medium |
| The HTTP parser in all current versions of Node.js ignores spaces in the `Content-Length` header, allowing input such as `Content-Length: 1 2` to be interpreted as having a value of `12`. The HTTP specification does not allow for spaces in the `Content-Length` value and the Node.js HTTP parser has been brought into line on this particular difference. The security risk of this flaw to Node.js users is considered to be VERY LOW as it is difficult, and may be impossible, to craft an attack that makes use of this flaw in a way that could not already be achieved by supplying an incorrect value for `Content-Length`. Vulnerabilities may exist in user-code that make incorrect assumptions about the potential accuracy of this value compared to the actual length of the data supplied. Node.js users crafting lower-level HTTP utilities are advised to re-check the length of any input supplied after parsing is complete. | ||||
| CVE-2020-29510 | 2 Golang, Netapp | 2 Go, Trident | 2024-09-16 | 9.8 Critical |
| The encoding/xml package in Go versions 1.15 and earlier does not correctly preserve the semantics of directives during tokenization round-trips, which allows an attacker to craft inputs that behave in conflicting ways during different stages of processing in affected downstream applications. | ||||
| CVE-2024-24790 | 2 Golang, Redhat | 17 Go, Advanced Cluster Security, Ansible Automation Platform and 14 more | 2024-09-05 | 9.8 Critical |
| The various Is methods (IsPrivate, IsLoopback, etc) did not work as expected for IPv4-mapped IPv6 addresses, returning false for addresses which would return true in their traditional IPv4 forms. | ||||
| CVE-2024-24784 | 1 Redhat | 12 Advanced Cluster Security, Enterprise Linux, Kube Descheduler Operator and 9 more | 2024-08-05 | 7.5 High |
| The ParseAddressList function incorrectly handles comments (text within parentheses) within display names. Since this is a misalignment with conforming address parsers, it can result in different trust decisions being made by programs using different parsers. | ||||
| CVE-2018-12123 | 2 Nodejs, Redhat | 2 Node.js, Rhel Software Collections | 2024-08-05 | 4.3 Medium |
| Node.js: All versions prior to Node.js 6.15.0, 8.14.0, 10.14.0 and 11.3.0: Hostname spoofing in URL parser for javascript protocol: If a Node.js application is using url.parse() to determine the URL hostname, that hostname can be spoofed by using a mixed case "javascript:" (e.g. "javAscript:") protocol (other protocols are not affected). If security decisions are made about the URL based on the hostname, they may be incorrect. | ||||
| CVE-2018-12116 | 3 Nodejs, Redhat, Suse | 5 Node.js, Rhel Software Collections, Suse Enterprise Storage and 2 more | 2024-08-05 | 7.5 High |
| Node.js: All versions prior to Node.js 6.15.0 and 8.14.0: HTTP request splitting: If Node.js can be convinced to use unsanitized user-provided Unicode data for the `path` option of an HTTP request, then data can be provided which will trigger a second, unexpected, and user-defined HTTP request to made to the same server. | ||||
| CVE-2020-27846 | 4 Fedoraproject, Grafana, Redhat and 1 more | 7 Fedora, Grafana, Enterprise Linux and 4 more | 2024-08-04 | 9.8 Critical |
| A signature verification vulnerability exists in crewjam/saml. This flaw allows an attacker to bypass SAML Authentication. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. | ||||
| CVE-2021-21366 | 2 Debian, Xmldom Project | 2 Debian Linux, Xmldom | 2024-08-03 | 4.3 Medium |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. xmldom versions 0.4.0 and older do not correctly preserve system identifiers, FPIs or namespaces when repeatedly parsing and serializing maliciously crafted documents. This may lead to unexpected syntactic changes during XML processing in some downstream applications. This is fixed in version 0.5.0. As a workaround downstream applications can validate the input and reject the maliciously crafted documents. | ||||
| CVE-2022-21672 | 1 Linuxfromscratch | 1 Make-ca | 2024-08-03 | 6.5 Medium |
| make-ca is a utility to deliver and manage a complete PKI configuration for workstations and servers. Starting with version 0.9 and prior to version 1.10, make-ca misinterprets Mozilla certdata.txt and treats explicitly untrusted certificates like trusted ones, causing those explicitly untrusted certificates trusted by the system. The explicitly untrusted certificates were used by some CAs already hacked. Hostile attackers may perform a MIM attack exploiting them. Everyone using the affected versions of make-ca should upgrade to make-ca-1.10, and run `make-ca -f -g` as the `root` user to regenerate the trusted store immediately. As a workaround, users may delete the untrusted certificates from /etc/pki/tls and /etc/ssl/certs manually (or by a script), but this is not recommended because the manual changes will be overwritten next time running make-ca to update the trusted anchor. | ||||
| CVE-2022-3224 | 1 Parse-url Project | 1 Parse-url | 2024-08-03 | 6.1 Medium |
| Misinterpretation of Input in GitHub repository ionicabizau/parse-url prior to 8.1.0. | ||||
| CVE-2022-1233 | 1 Uri.js Project | 1 Uri.js | 2024-08-02 | 6.1 Medium |
| URL Confusion When Scheme Not Supplied in GitHub repository medialize/uri.js prior to 1.19.11. | ||||
| CVE-2023-48950 | 1 Openlinksw | 1 Virtuoso | 2024-08-02 | 7.5 High |
| An issue in the box_col_len function in openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) after running a SELECT statement. | ||||
| CVE-2023-32228 | 2024-08-02 | 4.6 Medium | ||
| A firmware bug which may lead to misinterpretation of data in the AMC2-4WCF and AMC2-2WCF allowing an adversary to grant access to the last authorized user. | ||||