| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM DB2 High Performance Unload 6.1.0.3, 5.1.0.1, 6.1.0.2, 6.5, 6.5.0.0 IF1, 6.1.0.1, 6.1, 5.1, 6.1.0.3, 5.1.0.1, 6.1.0.2, 6.5, 6.5.0.0 IF1, 6.1.0.1, 6.1, 5.1, 6.1.0.3, 5.1.0.1, 6.1.0.2, 6.5, 6.5.0.0 IF1, 6.1.0.1, 6.1, 5.1, 6.1.0.3, 5.1.0.1, 6.1.0.2, 6.5, 6.5.0.0 IF1, 6.1.0.1, 6.1, and 5.1 could allow an authenticated user to cause the program to crash due to the incorrect calculation of a buffer size. |
| Memory corruption during PlayReady APP usecase while processing TA commands. |
| Memory corruption while processing a GP command response. |
| An invalid memory write issue in Jasper-Software Jasper v.4.1.1 and before allows a local attacker to execute arbitrary code. |
| Sudo before 1.9.15 might allow row hammer attacks (for authentication bypass or privilege escalation) because application logic sometimes is based on not equaling an error value (instead of equaling a success value), and because the values do not resist flips of a single bit. |
| An out-of-bounds write vulnerability exists in the sopen_FAMOS_read functionality of The Biosig Project libbiosig 2.5.0 and Master Branch (ab0ee111). A specially crafted .famos file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix Virtual Memory mapping boundaries calculation
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
[Joonas: Add Requires: tag]
Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) |
| In PHP from 8.1.* before 8.1.32, from 8.2.* before 8.2.28, from 8.3.* before 8.3.19, from 8.4.* before 8.4.5, when parsing HTTP redirect in the response to an HTTP request, there is currently limit on the location value size caused by limited size of the location buffer to 1024. However as per RFC9110, the limit is recommended to be 8000. This may lead to incorrect URL truncation and redirecting to a wrong location. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix freeing of the HMB descriptor table
The HMB descriptor table is sized to the maximum number of descriptors
that could be used for a given device, but __nvme_alloc_host_mem could
break out of the loop earlier on memory allocation failure and end up
using less descriptors than planned for, which leads to an incorrect
size passed to dma_free_coherent.
In practice this was not showing up because the number of descriptors
tends to be low and the dma coherent allocator always allocates and
frees at least a page. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: set the right AMDGPU sg segment limitation
The driver needs to set the correct max_segment_size;
otherwise debug_dma_map_sg() will complain about the
over-mapping of the AMDGPU sg length as following:
WARNING: CPU: 6 PID: 1964 at kernel/dma/debug.c:1178 debug_dma_map_sg+0x2dc/0x370
[ 364.049444] Modules linked in: veth amdgpu(OE) amdxcp drm_exec gpu_sched drm_buddy drm_ttm_helper ttm(OE) drm_suballoc_helper drm_display_helper drm_kms_helper i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc amd_atl intel_rapl_msr intel_rapl_common sunrpc sch_fq_codel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd binfmt_misc snd_hda_codec snd_pci_acp6x snd_hda_core snd_acp_config snd_hwdep snd_soc_acpi kvm_amd snd_pcm kvm snd_seq_midi snd_seq_midi_event crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 snd_rawmidi sha256_ssse3 sha1_ssse3 aesni_intel snd_seq nls_iso8859_1 crypto_simd snd_seq_device cryptd snd_timer rapl input_leds snd
[ 364.049532] ipmi_devintf wmi_bmof ccp serio_raw k10temp sp5100_tco soundcore ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport drm efi_pstore ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii
[ 364.049576] CPU: 6 PID: 1964 Comm: rocminfo Tainted: G OE 6.10.0-custom #492
[ 364.049579] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021
[ 364.049582] RIP: 0010:debug_dma_map_sg+0x2dc/0x370
[ 364.049585] Code: 89 4d b8 e8 36 b1 86 00 8b 4d b8 48 8b 55 b0 44 8b 45 a8 4c 8b 4d a0 48 89 c6 48 c7 c7 00 4b 74 bc 4c 89 4d b8 e8 b4 73 f3 ff <0f> 0b 4c 8b 4d b8 8b 15 c8 2c b8 01 85 d2 0f 85 ee fd ff ff 8b 05
[ 364.049588] RSP: 0018:ffff9ca600b57ac0 EFLAGS: 00010286
[ 364.049590] RAX: 0000000000000000 RBX: ffff88b7c132b0c8 RCX: 0000000000000027
[ 364.049592] RDX: ffff88bb0f521688 RSI: 0000000000000001 RDI: ffff88bb0f521680
[ 364.049594] RBP: ffff9ca600b57b20 R08: 000000000000006f R09: ffff9ca600b57930
[ 364.049596] R10: ffff9ca600b57928 R11: ffffffffbcb46328 R12: 0000000000000000
[ 364.049597] R13: 0000000000000001 R14: ffff88b7c19c0700 R15: ffff88b7c9059800
[ 364.049599] FS: 00007fb2d3516e80(0000) GS:ffff88bb0f500000(0000) knlGS:0000000000000000
[ 364.049601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 364.049603] CR2: 000055610bd03598 CR3: 00000001049f6000 CR4: 0000000000350ef0
[ 364.049605] Call Trace:
[ 364.049607] <TASK>
[ 364.049609] ? show_regs+0x6d/0x80
[ 364.049614] ? __warn+0x8c/0x140
[ 364.049618] ? debug_dma_map_sg+0x2dc/0x370
[ 364.049621] ? report_bug+0x193/0x1a0
[ 364.049627] ? handle_bug+0x46/0x80
[ 364.049631] ? exc_invalid_op+0x1d/0x80
[ 364.049635] ? asm_exc_invalid_op+0x1f/0x30
[ 364.049642] ? debug_dma_map_sg+0x2dc/0x370
[ 364.049647] __dma_map_sg_attrs+0x90/0xe0
[ 364.049651] dma_map_sgtable+0x25/0x40
[ 364.049654] amdgpu_bo_move+0x59a/0x850 [amdgpu]
[ 364.049935] ? srso_return_thunk+0x5/0x5f
[ 364.049939] ? amdgpu_ttm_tt_populate+0x5d/0xc0 [amdgpu]
[ 364.050095] ttm_bo_handle_move_mem+0xc3/0x180 [ttm]
[ 364.050103] ttm_bo_validate+0xc1/0x160 [ttm]
[ 364.050108] ? amdgpu_ttm_tt_get_user_pages+0xe5/0x1b0 [amdgpu]
[ 364.050263] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0xa12/0xc90 [amdgpu]
[ 364.050473] kfd_ioctl_alloc_memory_of_gpu+0x16b/0x3b0 [amdgpu]
[ 364.050680] kfd_ioctl+0x3c2/0x530 [amdgpu]
[ 364.050866] ? __pfx_kfd_ioctl_alloc_memory_of_gpu+0x10/0x10 [amdgpu]
[ 364.05105
---truncated--- |
| Incorrect Calculation of Buffer Size in GitHub repository vim/vim prior to 9.0.1378. |
| In the Linux kernel, the following vulnerability has been resolved:
rtnetlink: Allocate vfinfo size for VF GUIDs when supported
Commit 30aad41721e0 ("net/core: Add support for getting VF GUIDs")
added support for getting VF port and node GUIDs in netlink ifinfo
messages, but their size was not taken into consideration in the
function that allocates the netlink message, causing the following
warning when a netlink message is filled with many VF port and node
GUIDs:
# echo 64 > /sys/bus/pci/devices/0000\:08\:00.0/sriov_numvfs
# ip link show dev ib0
RTNETLINK answers: Message too long
Cannot send link get request: Message too long
Kernel warning:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1930 at net/core/rtnetlink.c:4151 rtnl_getlink+0x586/0x5a0
Modules linked in: xt_conntrack xt_MASQUERADE nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay mlx5_ib macsec mlx5_core tls rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm iw_cm ib_ipoib fuse ib_cm ib_core
CPU: 2 UID: 0 PID: 1930 Comm: ip Not tainted 6.14.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:rtnl_getlink+0x586/0x5a0
Code: cb 82 e8 3d af 0a 00 4d 85 ff 0f 84 08 ff ff ff 4c 89 ff 41 be ea ff ff ff e8 66 63 5b ff 49 c7 07 80 4f cb 82 e9 36 fc ff ff <0f> 0b e9 16 fe ff ff e8 de a0 56 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ffff888113557348 EFLAGS: 00010246
RAX: 00000000ffffffa6 RBX: ffff88817e87aa34 RCX: dffffc0000000000
RDX: 0000000000000003 RSI: 0000000000000000 RDI: ffff88817e87afb8
RBP: 0000000000000009 R08: ffffffff821f44aa R09: 0000000000000000
R10: ffff8881260f79a8 R11: ffff88817e87af00 R12: ffff88817e87aa00
R13: ffffffff8563d300 R14: 00000000ffffffa6 R15: 00000000ffffffff
FS: 00007f63a5dbf280(0000) GS:ffff88881ee00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63a5ba4493 CR3: 00000001700fe002 CR4: 0000000000772eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa5/0x230
? rtnl_getlink+0x586/0x5a0
? report_bug+0x22d/0x240
? handle_bug+0x53/0xa0
? exc_invalid_op+0x14/0x50
? asm_exc_invalid_op+0x16/0x20
? skb_trim+0x6a/0x80
? rtnl_getlink+0x586/0x5a0
? __pfx_rtnl_getlink+0x10/0x10
? rtnetlink_rcv_msg+0x1e5/0x860
? __pfx___mutex_lock+0x10/0x10
? rcu_is_watching+0x34/0x60
? __pfx_lock_acquire+0x10/0x10
? stack_trace_save+0x90/0xd0
? filter_irq_stacks+0x1d/0x70
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
rtnetlink_rcv_msg+0x21c/0x860
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
? arch_stack_walk+0x9e/0xf0
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd5/0x410
? rcu_is_watching+0x34/0x60
netlink_rcv_skb+0xe0/0x210
? __pfx_rtnetlink_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? rcu_is_watching+0x34/0x60
? __pfx___netlink_lookup+0x10/0x10
? lock_release+0x62/0x200
? netlink_deliver_tap+0xfd/0x290
? rcu_is_watching+0x34/0x60
? lock_release+0x62/0x200
? netlink_deliver_tap+0x95/0x290
netlink_unicast+0x31f/0x480
? __pfx_netlink_unicast+0x10/0x10
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd5/0x410
netlink_sendmsg+0x369/0x660
? lock_release+0x62/0x200
? __pfx_netlink_sendmsg+0x10/0x10
? import_ubuf+0xb9/0xf0
? __import_iovec+0x254/0x2b0
? lock_release+0x62/0x200
? __pfx_netlink_sendmsg+0x10/0x10
____sys_sendmsg+0x559/0x5a0
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
? rcu_is_watching+0x34/0x60
? do_read_fault+0x213/0x4a0
? rcu_is_watching+0x34/0x60
___sys_sendmsg+0xe4/0x150
? __pfx____sys_sendmsg+0x10/0x10
? do_fault+0x2cc/0x6f0
? handle_pte_fault+0x2e3/0x3d0
? __pfx_handle_pte_fault+0x10/0x10
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add rough attr alloc_size check |
| ImageMagick is free and open-source software used for editing and manipulating digital images. ImageMagick versions lower than 14.8.2 include insecure functions: SeekBlob(), which permits advancing the stream offset beyond the current end without increasing capacity, and WriteBlob(), which then expands by quantum + length (amortized) instead of offset + length, and copies to data + offset. When offset ≫ extent, the copy targets memory beyond the allocation, producing a deterministic heap write on 64-bit builds. No 2⁶⁴ arithmetic wrap, external delegates, or policy settings are required. This is fixed in version 14.8.2. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
In clustermd, separate write-intent-bitmaps are used for each cluster
node:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
So in node 1, pg_index in __write_sb_page() could equal to
bitmap->storage.file_pages. Then bitmap_limit will be calculated to
0. md_super_write() will be called with 0 size.
That means the first 4k sb area of node 1 will never be updated
through filemap_write_page().
This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize.
Here use (pg_index % bitmap->storage.file_pages) to make calculation
of bitmap_limit correct. |
| sysstat is a set of system performance tools for the Linux operating system. On 32 bit systems, in versions 9.1.16 and newer but prior to 12.7.1, allocate_structures contains a size_t overflow in sa_common.c. The allocate_structures function insufficiently checks bounds before arithmetic multiplication, allowing for an overflow in the size allocated for the buffer representing system activities. This issue may lead to Remote Code Execution (RCE). This issue has been patched in version 12.7.1. |
| Windows Kernel Local Elevation of Privilege Vulnerability |
| In OpenBSD 7.3 before errata 016, npppd(8) could crash by a l2tp message which has an AVP (Attribute-Value Pair) with wrong length.
|
| In OpenBSD 7.4 before errata 002 and OpenBSD 7.3 before errata 019, a network buffer that had to be split at certain length that could crash the kernel after receiving specially crafted escape sequences. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start. |
