| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix double-free and use-after-free in error paths
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths. |
| When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: reject duplicate leaves in GROUP request
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix double free of wq, engine, and group structs
The release callbacks for wq, engine, and group devices
(idxd_conf_wq_release, idxd_conf_engine_release,
idxd_conf_group_release) each call kfree() on the enclosing struct.
The setup error paths and cleanup functions also call kfree()
explicitly after put_device(), producing a double free whenever
put_device() drops the reference count to zero and fires the release.
In the setup functions, device_initialize() is called before
device_add(), so the reference count is exactly 1 at the error sites.
put_device() unconditionally fires the release, which frees the struct;
the subsequent explicit kfree() then operates on freed memory.
For idxd_setup_wqs(), the wq release callback also owns opcap_bmap
and wqcfg. The error unwind additionally freed those fields explicitly
before calling put_device(), causing further double frees on both.
Remove the redundant explicit kfree() calls from all setup error paths
and cleanup functions for wq, engine, and group structs, delegating
sole ownership of those allocations to the release callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context
In the nested state, the physical interrupt has already been
deactivated through the HW bit in the LR. The extra deactivation
would be harmless but can hit an errata case on AmpereOne, so
avoid it here.
On AmpereOne, deactivating a physical interrupt through
ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not
active, but is the highest priority pending interrupt causes the
cpu to lose the interrupt pending state and also prevents the
delivery of future interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix double free in rxe_srq_from_init
In rxe_srq_from_init(), the queue pointer 'q' is assigned to
'srq->rq.queue' before copying the SRQ number to user space.
If copy_to_user() fails, the function calls rxe_queue_cleanup()
to free the queue, but leaves the now-invalid pointer in
'srq->rq.queue'.
The caller of rxe_srq_from_init() (rxe_create_srq) eventually
calls rxe_srq_cleanup() upon receiving the error, which triggers
a second rxe_queue_cleanup() on the same memory, leading to a
double free.
The call trace looks like this:
kmem_cache_free+0x.../0x...
rxe_queue_cleanup+0x1a/0x30 [rdma_rxe]
rxe_srq_cleanup+0x42/0x60 [rdma_rxe]
rxe_elem_release+0x31/0x70 [rdma_rxe]
rxe_create_srq+0x12b/0x1a0 [rdma_rxe]
ib_create_srq_user+0x9a/0x150 [ib_core]
Fix this by moving 'srq->rq.queue = q' after copy_to_user. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sungem: fix probe error cleanup
gem_init_one() calls gem_remove_one() when register_netdev() fails.
gem_remove_one() unregisters and frees resources owned by the net_device,
including the DMA block, MMIO mapping, PCI regions, and the net_device
itself. gem_init_one() then falls through to its own cleanup labels and
frees the same resources again.
Keep the register_netdev() error path in gem_init_one(): clear drvdata so
PM/remove paths do not see a half-registered device, remove the NAPI
instance added during probe, and let the existing cleanup labels release
the resources once.
The issue was found by a local static-analysis checker for probe error
paths. The reported path was manually inspected before sending this fix.
Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed
because no sungem hardware is available. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: fix double free of out_cvts on rawmidi error
snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array
ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with
kfree() but leaves ump->out_cvts pointing at the freed memory. When the
endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts
a second time, resulting in a double free.
The host snd-usb-audio driver attaches the legacy rawmidi for any USB
MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail
reaches this path on enumeration.
Clear ump->out_cvts after freeing it on the error path so it is not
freed again during teardown.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, rdpsnd_server_recv_formats in channels/rdpsnd/server/rdpsnd_main.c frees context->client_formats on a malformed Client Audio Formats PDU without clearing the owning pointer or num_client_formats. An authenticated RDP client can trigger an error such as a cbSize larger than the remaining record, leave the dangling pointer in the server context, and cause rdpsnd_server_context_free to free the same allocation again at session teardown. This reliably terminates the server and can create allocator-dependent heap corruption. This issue is fixed in version 3.28.0. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: don't free uninitialized dev_name on error path
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0
Free of addr ffff8881069ccb80 by task trigger.sh/285
Call Trace:
kfree+0x113/0x3c0
usb_free_urb.part.0+0x91/0xb0
Drop the redundant kfree(buf); usb_free_urb() already releases the transfer
buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free
issue with interrupt buffer allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/hw_engine: Fix double-free of managed BO in error path
The error path in hw_engine_init() explicitly frees a BO allocated
with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm().
Since the managed BO already has a devm cleanup action registered,
this causes a double-free when devm unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit e459a3bdeb117be496d7f229e2ea1f6c9fe4080b) |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: harden rq_procinfo lifecycle to prevent double-free
The svc_release_rqst() function executes the callback inside
rqstp->rq_procinfo->pc_release. However, if a worker thread begins
processing a new request and encounters an early error path (e.g.,
unsupported protocol, short frame, or bad auth) before a valid
rq_procinfo is installed, a stale release hook can be re-triggered
against reused state from the previous RPC, resulting in a double-free
or use-after-free vulnerability.
Harden the lifecycle of rq_procinfo by:
1. Ensuring svc_release_rqst() always clears rq_procinfo after the
optional pc_release() call, regardless of whether the hook exists.
2. Explicitly clearing rq_procinfo at request entry in svc_process()
before any early decode or drop paths.
3. Ensuring svc_process_bc() does the same at backchannel entry.
This guarantees that error flows will not encounter a non-NULL stale
rq_procinfo pointer when there is nothing to release. |
| In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Don't move a peeked OOB message onto the pending queue
rxrpc_recvmsg_oob() takes a received oob message off recvmsg_oobq and,
if a response is needed, moves it onto the pending_oobq tree. However,
only the unlink from recvmsg_oobq is guarded by MSG_PEEK; the move onto
pending_oobq always runs.
As a result, reading a challenge with MSG_PEEK leaves the skb on
recvmsg_oobq while also adding it to pending_oobq. Since struct
sk_buff's rbnode shares storage with its next and prev pointers,
rb_insert_color() overwrites the list linkage, and the skb, which holds
a single reference, becomes reachable from both queues at once.
When the socket is closed both queues are drained in turn. While
draining recvmsg_oobq, __skb_unlink() follows the next and prev
pointers that rbnode has overwritten and writes to a bad address. Also,
as the skb holds a single reference but is freed from each queue, both
the skb and the connection reference it holds are released twice. This
leads to memory corruption and to a use-after-free caused by the
connection refcount underflow.
MSG_PEEK does not consume the message from the queue, so only unlink it
from recvmsg_oobq and then move it onto pending_oobq or free it when
the message is actually consumed. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: nat_keepalive: avoid double free on send error
nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6
send helper reports an error.
That cleanup is only correct before the skb is handed to the output
path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the
networking stack may already have consumed the skb before returning an
error, so freeing it again is unsafe.
Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4()
and nat_keepalive_send_ipv6(), where the caller still owns the skb, and
keep nat_keepalive_send() responsible only for family dispatch and the
unsupported-family cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
