| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A path traversal vulnerability was found in Undertow. This issue may allow a remote attacker to append a specially-crafted sequence to an HTTP request for an application deployed to JBoss EAP, which may permit access to privileged or restricted files and directories. |
| A flaw was found in the mod_auth_openidc module for Apache httpd. This flaw allows a remote, unauthenticated attacker to trigger a denial of service by sending an empty POST request when the OIDCPreservePost directive is enabled. The server crashes consistently, affecting availability. |
| A flaw was found in libnbd. A server can reply with a block size larger than 2^63 (the NBD spec states the size is a 64-bit unsigned value). This issue could lead to an application crash or other unintended behavior for NBD clients that doesn't treat the return value of the nbd_get_size() function correctly. |
| Unchecked Error Condition vulnerability in Apache Tomcat. If Tomcat is configured to use a custom Jakarta Authentication (formerly JASPIC) ServerAuthContext component which may throw an exception during the authentication process without explicitly setting an HTTP status to indicate failure, the authentication may not fail, allowing the user to bypass the authentication process. There are no known Jakarta Authentication components that behave in this way.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M26, from 10.1.0-M1 through 10.1.30, from 9.0.0-M1 through 9.0.95.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fix the issue. |
| Protocol manipulation might lead to denial of service.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5 . |
| A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the "certtool --verify-chain" command. |
| A path traversal vulnerability was identified in SourceCodester Pet Grooming Management System 1.0, affecting the admin/manage_website.php component. An authenticated user with administrative privileges can leverage this flaw by submitting a specially crafted POST request, enabling the deletion of arbitrary files on the web server or underlying operating system. |
| Output Messenger before 2.0.63 was vulnerable to a directory traversal attack through improper file path handling. By using ../ sequences in parameters, attackers could access sensitive files outside the intended directory, potentially leading to configuration leakage or arbitrary file access. |
| An issue in NetSurf v3.11 causes the application to read uninitialized heap memory when creating a dom_event structure. |
| Uncaught exception in Microsoft Office allows an unauthorized attacker to deny service locally. |
| In FRRouting (FRR) through 9.1, an attacker using a malformed Prefix SID attribute in a BGP UPDATE packet can cause the bgpd daemon to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to don't dirty inode for readonly filesystem
syzbot reports f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:933!
RIP: 0010:f2fs_evict_inode+0x1576/0x1590 fs/f2fs/inode.c:933
Call Trace:
evict+0x2a4/0x620 fs/inode.c:664
dispose_list fs/inode.c:697 [inline]
evict_inodes+0x5f8/0x690 fs/inode.c:747
generic_shutdown_super+0x9d/0x2c0 fs/super.c:675
kill_block_super+0x44/0x90 fs/super.c:1667
kill_f2fs_super+0x303/0x3b0 fs/f2fs/super.c:4894
deactivate_locked_super+0xc1/0x130 fs/super.c:484
cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256
task_work_run+0x24a/0x300 kernel/task_work.c:180
ptrace_notify+0x2cd/0x380 kernel/signal.c:2399
ptrace_report_syscall include/linux/ptrace.h:411 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:473 [inline]
syscall_exit_work kernel/entry/common.c:251 [inline]
syscall_exit_to_user_mode_prepare kernel/entry/common.c:278 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x15c/0x280 kernel/entry/common.c:296
do_syscall_64+0x50/0x110 arch/x86/entry/common.c:88
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The root cause is:
- do_sys_open
- f2fs_lookup
- __f2fs_find_entry
- f2fs_i_depth_write
- f2fs_mark_inode_dirty_sync
- f2fs_dirty_inode
- set_inode_flag(inode, FI_DIRTY_INODE)
- umount
- kill_f2fs_super
- kill_block_super
- generic_shutdown_super
- sync_filesystem
: sb is readonly, skip sync_filesystem()
- evict_inodes
- iput
- f2fs_evict_inode
- f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE))
: trigger kernel panic
When we try to repair i_current_depth in readonly filesystem, let's
skip dirty inode to avoid panic in later f2fs_evict_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: aead,cipher - zeroize key buffer after use
I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding
cryptographic information should be zeroized once they are no longer
needed. Accomplish this by using kfree_sensitive for buffers that
previously held the private key. |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: do not assume mac header is set in geneve_xmit_skb()
We should not assume mac header is set in output path.
Use skb_eth_hdr() instead of eth_hdr() to fix the issue.
sysbot reported the following :
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline]
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline]
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline]
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039
Modules linked in:
CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline]
RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline]
RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline]
RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039
Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff
RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283
RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000
RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003
RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000
R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23
FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
__dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490
dev_direct_xmit include/linux/netdevice.h:3181 [inline]
packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3146 [inline]
packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
__sys_sendto+0x488/0x4f0 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| An authenticated, read-only user can upload a file and perform a directory traversal to have the uploaded file placed in a location of their choosing. This can be used to overwrite existing PERL modules within the application to achieve remote code execution (RCE) by an attacker. |
| RUCKUS SmartZone (SZ) before 6.1.2p3 Refresh Build allows ../ directory traversal to read files. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix unsafe attribute parsing in output_userspace()
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed. |
| Uncaught exception in the core management mechanism for some Intel(R) Processors may allow an authenticated user to potentially enable denial of service via local access. |
| An attacker who tampers with the C++ CLI client may crash the UpdateService during file transfers, disrupting updates and availability. |
| GNU Tar through 1.35 allows file overwrite via directory traversal in crafted TAR archives, with a certain two-step process. First, the victim must extract an archive that contains a ../ symlink to a critical directory. Second, the victim must extract an archive that contains a critical file, specified via a relative pathname that begins with the symlink name and ends with that critical file's name. Here, the extraction follows the symlink and overwrites the critical file. This bypasses the protection mechanism of "Member name contains '..'" that would occur for a single TAR archive that attempted to specify the critical file via a ../ approach. For example, the first archive can contain "x -> ../../../../../home/victim/.ssh" and the second archive can contain x/authorized_keys. This can affect server applications that automatically extract any number of user-supplied TAR archives, and were relying on the blocking of traversal. This can also affect software installation processes in which "tar xf" is run more than once (e.g., when installing a package can automatically install two dependencies that are set up as untrusted tarballs instead of official packages). NOTE: the official GNU Tar manual has an otherwise-empty directory for each "tar xf" in its Security Rules of Thumb; however, third-party advice leads users to run "tar xf" more than once into the same directory. |
