Search vulnerabilities

Results 164

CVE-2026-121482

openssl: openssl: Denial of Service via crafted CMS or PKCS#7 SignedData message

Verifying a maliciously crafted CMS or PKCS#7 SignedData message with CRL checking enabled may consume excessive CPU time, growing with the square of the message size.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-133422

Quadratic time unique_items list validation in Pydantic V1

Validating an untrusted list into a field constrained with unique_items=True with Pydantic V1 takes quadratic time: an input of a few hundred kilobytes takes seconds to validate. The ConstrainedList.unique_items_validator validator (in pydantic/types.py) checks each item against all the following ones. For a list with no duplicates (the common, valid case), this results in a quadratic number of comparisons. The issue was fixed in commit 6ec75e57f277a820ec583e601167f25fe8dc7c87. Users relying on the pydantic.v1 namespace in Pydantic V2 should upgrade to 2.14.2 or later. Impact: denial of service through validation of untrusted input. Affected are applications validating untrusted lists into fields constrained with unique_items=True (using conlist() or Field()). The fix only applies to lists of builtin scalar types (int, float, str, bytes, bool and None), for which duplicates can be detected in linear time. Lists of other types (e.g. models or dictionaries) are still checked in quadratic time, as their items aren't guaranteed to be hashable: bound their size using the max_items constraint. Pydantic V2 models are not affected.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99711

KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry Add a missing "break" in the inner for-loop of the open coded mess that unwinds MSRs back to the pre-VM-Enter state when VMLAUNCH/VMRESUME VM-Fails due to a consistency check that is caught by hardware but missed by KVM. I.e. move on to the next MSR in the VM-Entry load list after performing a write using a value found in the VM-Exit load list. Processing *every* matching entry in the VM-Exit load list makes the processing quadratic, which is problematic if the load lists are full of MSRs that are expensive to emulate. E.g. writing APIC_BASE triggers kvm_recalculate_apic_map() and a whole pile of unnecessary work. Functionally, arbitrarily restoring the value of the first matching entry is "fine", because none of this is architecturally correct: the load lists are never supposed to have been used in the first place. In practice, it's likely a moot point as no well-behaved VMM will have multiple, diverging entries in the load lists.

CVSS 3.1 · 3.2 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99372

NFSD: cap the number of listeners accepted in listener_set

In the Linux kernel, the following vulnerability has been resolved: NFSD: cap the number of listeners accepted in listener_set nfsd_nl_listener_set_doit() matches each requested listener against the existing set. The nested loop that does this is O(N * M), where N is the requested count and M is the existing count. The loop runs under sv_lock with bottom halves disabled. A userland request with a very large listener list can therefore spin in atomic context for a long time. Reject a request that carries more than NFSD_NL_LISTENER_MAX (1024) entries. The check goes in nfsd_nl_validate_listeners(), before the code takes any lock. The limit is far above any realistic configuration. This patch does not cap M. Only the message size bounded N; real sockets bound M. A listener_set result set is the requested set, so that path also holds M at the cap, but __write_ports_addxprt() adds two listeners per call and removes none, so repeated calls can push M past it. The worst case under sv_lock is therefore 1024 * M, plus 1024 nla_parse_nested() calls. Both interfaces require CAP_NET_ADMIN.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-117678

idna: punycode labels are decoded before the 63-octet length check, so a long xn-- label causes super-linear CPU use

Inefficient Algorithmic Complexity vulnerability in benoitc idna allows an attacker who controls a hostname passed to the library to exhaust CPU via an over-long xn-- label. idna:ulabel/1 in src/idna.erl hands every ASCII label that starts with xn-- to punycode:decode/1 without applying check_label_length/1, the 63-octet DNS label limit. punycode:decode/1 in src/punycode.erl builds its output with list appends in insert/4, so its cost grows super-linearly with the label length. A label of a few kilobytes keeps a scheduler busy for seconds to minutes before the label is rejected as invalid punycode. Every decode entry point reaches this path: decode/1, decode/2, to_unicode/1 and from_ascii/1. The encode path reaches it as well, because alabel/1 calls ulabel/1 on an ASCII xn-- label before its own length check, so encode/1, encode/2 and to_ascii/1 are affected for such input. This issue affects idna: from 0.5.0 before 8.0.0.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98056

nvme: remove stale namespaces by NSID range during scan

In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:__srcu_read_unlock+0xb/0x20 Call Trace: nvme_find_get_ns+0x7d/0xb0 [nvme_core] nvme_scan_ns_list+0xe8/0x280 [nvme_core] nvme_scan_work+0x18a/0x280 [nvme_core] process_one_work+0x197/0x380 worker_thread+0x2fe/0x410 kthread+0xe0/0x100 Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range() and give it an open (start, end) NSID range. ctrl->namespaces is sorted by NSID, so the whole gap is dropped in a single walk that stops once end is reached. This bounds the work by the namespaces that are present instead of by the size of the gap.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126300

NLTK from 3.2.5 before 3.10.4 CPU Exhaustion via TreebankWordTokenizer.span_tokenize

NLTK from 3.2.5 before 3.10.4 contains an algorithmic complexity vulnerability in TreebankWordTokenizer.span_tokenize that allows remote attackers to cause quadratic CPU consumption through repeated list.pop(0) calls. Attackers can submit long runs of double-quote characters to services span-tokenizing untrusted text, exhausting a CPU core and degrading availability.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-128342

ExcelJS through 4.4.0 Denial of Service via Oversized Worksheet sheetId

ExcelJS through 4.4.0 contains a denial of service vulnerability that allows attackers to block the event loop by supplying an unbounded sheetId in xl/workbook.xml. Attackers can provide a workbook with a huge sheetId, making the sparse worksheet array walk stall worksheets, getWorksheet and writeBuffer for seconds.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Products
CVE-2026-128343

ExcelJS through 4.4.0 Denial of Service via Oversized Row Number

exceljs through 4.4.0 contains a denial of service vulnerability that allows attackers to block the event loop by supplying unbounded row r attributes parsed in row-xform.js. Attackers can craft an XLSX file with a row numbered far beyond Excel's limit, making getSheetValues(), workbook writes and CSV export consume time proportional to that number.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126301

NLTK from 3.6 before 3.10.4 Quadratic CPU Exhaustion via LegalitySyllableTokenizer.tokenize

NLTK from 3.6 before 3.10.4 contains an algorithmic complexity vulnerability in LegalitySyllableTokenizer.tokenize that allows remote attackers to exhaust CPU by supplying long all-vowel tokens. Attackers can submit a token such as a long run of vowels, causing the unguarded onset reversal loop to perform quadratic work and deny service to syllabification components.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126066

fast-xml-parser: Quadratic CPU consumption scanning unterminated stop-node tags

fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. Prior to 5.12.0, when the non-default stopNodes option is enabled, readStopNodeData() in OrderedObjParser.js calls readTagExp() for each less-than character in an unterminated stop-node body and repeatedly rescans the remaining input while looking for a closing greater-than character. An attacker who supplies XML containing many tag fragments without a later closing character can cause quadratic rescanning before parsing fails, blocking a Node.js event loop and causing CPU-exhaustion denial of service. This issue is fixed in version 5.12.0.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Products
CVE-2026-63891

thunderbolt: property: Cap recursion depth in __tb_property_parse_dir()

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-118037

Uncontrolled Resource Consumption in Telerik Document Processing Libraries RadSpreadProcessing and RadSpreadStreamProcessing

In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-114605

dnspython dns.name.from_wire_parser() excessive CPU use

dnspython is a DNS toolkit for Python. Prior to 2.9.0, dns.name.from_wire_parser follows attacker-controlled DNS compression pointer chains without a hop limit. A malicious DNS wire-format message can force excessive pointer traversal during name decompression, causing high CPU use, application degradation, or denial of service in applications that process untrusted DNS messages. This issue is fixed in version 2.9.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-125264

FFmpeg through 9.0.2 CPU Exhaustion via JPEG XL Parser TOC Count

FFmpeg through 9.0.2 contains an uncontrolled resource consumption vulnerability in parse_frame_header() in libavcodec/jpegxl_parser.c that fails to validate TOC entry counts against remaining input. Attackers can supply a crafted JPEG XL frame header with a permuted TOC and huge toc_count, making the parser loop excessively and exhaust CPU.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-6237

Excessive time spent checking invalid RSA public keys

Issue summary: Checking excessively long invalid RSA public keys may take a long time. Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the '-pubin' and '-check' options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

CVSS 3.1 · 5.9 Medium EPSS 2.5% KEV · Not listed
Vendors
Netapp Openssl Redhat and 1 more
Products
500f 500f Firmware 8300 and 56 more
CVE-2026-3276

Potential DoS via quadratic complexity in unicodedata.normalize()

unicodedata.normalize() can take excessive CPU time when processing specially crafted Unicode input containing long runs of combining characters with alternating Canonical Combining Class values. This affects all normalization forms.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-4603

Excessive time spent checking DSA keys and parameters

Issue summary: Checking excessively long DSA keys or parameters may be very slow. Impact summary: Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform various checks on DSA parameters. Some of those computations take a long time if the modulus (`p` parameter) is too large. Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks. An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable. Also vulnerable are the OpenSSL pkey and pkeyparam command line applications when using the `-check` option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

CVSS 3.1 · 5.3 Medium EPSS 1.2% KEV · Not listed
Products
500f 500f Firmware 8300 and 37 more
CVE-2026-121438

Mistune before 3.3.3 Denial of Service via Balanced Bracket Link Parsing

Mistune before 3.3.3 contains a denial of service vulnerability in InlineParser.parse_link that allows attackers to cause quadratic CPU growth by supplying balanced nested brackets. Attackers can submit crafted Markdown with thousands of nested bracket pairs not forming a valid link, triggering repeated _contains_nested_link scans that exhaust CPU in parsing applications.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Products