| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper conditions check for some Intel(R) PROSet/Wireless WiFi Software within Ring 2: Device Drivers may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-rc.1, RustFS Object Lock enforcement in crates/ecstore/src/bucket/object_lock/objectlock_sys.rs lets check_object_lock_for_deletion, delete_prefix, and lifecycle and scanner sweeps treat ConfigNotFound, unreadable .metadata.bin data, or unparseable metadata as no lock configuration, allowing objects under COMPLIANCE retention to be deleted or expired. This issue is fixed in version 1.0.0-rc.1. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, a malicious SSH server can crash a russh client session with a malformed KEX_ECDH_REPLY containing a server ephemeral value that is not 32 bytes long. The client-side Curve25519Kex::compute_shared_secret function in russh/src/kex/curve25519.rs passes the decoded exchange.server_ephemeral value to clone_from_slice without validating its length, causing a deterministic panic before the server host key is verified. The panic terminates the spawned client session task and surfaces as a JoinError, while the embedding process normally remains running. This issue is fixed in version 0.62.4. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an unauthenticated SSH client can cause a denial of service by sending SSH_MSG_KEX_ECDH_INIT with a 32-byte all-zero Q_C value. Curve25519Kex::server_dh in russh/src/kex/curve25519.rs accepts the all-zero peer public value and computes an all-zero shared secret, after which compute_exchange_hash calls encode_mpint in russh/src/kex/mod.rs and indexes beyond the end of the input while skipping leading zero bytes. The resulting panic occurs before authentication and terminates the server key-exchange task. This issue is fixed in version 0.62.4. |
| Improper conditions check for some Intel(R) PROSet/Wireless WiFi Software for Windows within Ring 2: Device Drivers may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (low) impacts. |
| Improper conditions check in the firmware for the Intel(R) NPU Driver for all versions within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper conditions check for the Intel(R) NPU Driver for all versions within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper conditions check for some Intel(R) PROSet/Wireless WiFi Software within Ring 2: Device Drivers may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.233.16-7862), Desigo PXC3 (All versions < V01.21.233.16-7862), Desigo PXC4 (All versions < V02.21.194.36-2715), Desigo PXC5.E003 (All versions < V02.21.194.36-2715), Desigo PXC5.E24 (All versions < V02.21.194.36-2715), Desigo PXC7 (All versions < V02.21.194.36-2715). The affected devices are vulnerable to a denial-of-service (DoS) vulnerability. An attacker can exploit this issue by sending a malformed BACnet packet, causing the device to stop responding to BACnet queries. Recovery requires a device reset or reboot to restore normal functionality. |
| A vulnerability in the interaction of SIP and Snort 3 for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart.
This vulnerability is due to a lack of error-checking when SIP bidirectional flows are being inspected by Snort 3. An attacker could exploit this vulnerability by sending a stream of crafted SIP traffic through an interface on the targeted device. A successful exploit could allow the attacker to trigger a restart of the Snort 3 process, resulting in a denial of service (DoS) condition. |
| SAP Approuter does not consistently handle certain error conditions. An attacker with low privileges could exploit this under a non-default configuration. Successful exploitation is highly complex, as it depends on conditions outside the attacker's control. This could result in a low impact on availability. There is no impact on confidentiality and integrity. |
| Improper verification of cryptographic signature and Improper Check for Unusual or Exceptional Conditions vulnerability in Estonian Information System Authority (RIA) libdigidocpp, DigiDoc4, DigiDoc on Android, and DigiDoc on iOS. This issue affects libdigidocpp: from 4.1.0 before 4.2.1; DigiDoc4: from 4.7.0 before 4.8.2; DigiDoc on Android: from 2.7.0 before 2.7.2; DigiDoc on iOS: from 2.8.0 before 2.8.1. |
| Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150, Thunderbird 150, Firefox ESR 140.10.1, Thunderbird 140.10.1, and Firefox ESR 115.35.2. |
| Multiple denial of service vulnerabilities in Palo Alto Networks PAN-OS® software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition by sending specially crafted network traffic to or through a dataplane interface. Repeated attempts to trigger this condition result in the firewall entering maintenance mode.
Panorama is not impacted by these vulnerabilities. |
| Malformed or out-of-sequence frames at the Aviation Very High Frequency Link Control X.25 layers cause repeated resets which may result in increased workload and reduced situational awareness. This type of attack can be carried out remotely over radio frequency. |
| Injection of false emergency or status messages over CPDLC may lead to misallocation of resources, operational confusion, and improper response actions by flight crews, traffic controllers, and ground operations. This type of attack can be carried out remotely over radio frequency. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets
vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the
outer header, but for a Geneve-encapsulated packet the device can set
them based on the inner header instead, signalled by the
VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the
function never skips the outer encapsulation, this mismatch triggers:
- BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer
protocol is UDP (Geneve), not TCP.
- BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner
IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa).
Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the
function cannot locate the inner header it would need to parse. Also
convert the remaining BUG_ON()s in this function to return 0
defensively. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: fix cleanup bugs in vivid_init()
When platform_device_register() fails in vivid_init(), the embedded
struct device in vivid_pdev has already been initialized by
device_initialize(), but the failure path jumps to free_output_strings
without dropping the device reference for the current platform device:
vivid_init()
-> platform_device_register(&vivid_pdev)
-> device_initialize(&vivid_pdev.dev)
-> setup_pdev_dma_masks(&vivid_pdev)
-> platform_device_add(&vivid_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before jumping to the common
cleanup path.
Also, the unreg_driver label incorrectly calls
platform_driver_register() instead of platform_driver_unregister(),
which breaks cleanup when workqueue creation fails after successful
driver registration. Fix that as well.
The reference leak was identified by a static analysis tool I developed
and confirmed by manual review. The incorrect cleanup call was found
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: check for vb2_is_busy() when toggling caps
The vivid_update_format_cap/out() functions must only be called if the
capture/output queue are not busy. But for the controls that select
the CROP/COMPOSE/SCALE capability that is not checked.
Only when streaming starts will they be set to 'grabbed' and it is
impossible to change the control, but between REQBUFS and STREAMON you
are still allowed to set these controls. Since vivid_update_format_cap/out
will change the format, this can cause unexpected results.
Besides adding these checks, also add a WARN_ON in
vivid_update_format_cap/out() if the queue is busy.
I'm 90% certain that this is the cause of this syzbot bug:
https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89
But since we never have reproducers, it is hard to be certain. In any case,
these checks are needed regardless. |
| In imgsensor, there is a possible application crash due to incorrect error handling. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11012302; Issue ID: MSV-7833. |
