An improper interpretation conflict of certain data between certain software components within the Juniper Networks Junos OS devices does not allow certain traffic to pass through the device upon receipt from an ingress interface filtering certain specific types of traffic which is then being redirected to an egress interface on a different VLAN. This causes a Denial of Service (DoS) to those clients sending these particular types of traffic. Such traffic being sent by a client may appear genuine, but is non-standard in nature and should be considered as potentially malicious, and can be targeted to the device, or destined through it for the issue to occur. This issues affects IPv4 and IPv6 traffic. An indicator of compromise may be found by checking log files. You may find that traffic on the input interface has 100% of traffic flowing into the device, yet the egress interface shows 0 pps leaving the device. For example: [show interfaces "interface" statistics detail] Output between two interfaces would reveal something similar to: Ingress, first interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/0 Up 9999999999 (9999) 1 (0) -------------------- Egress, second interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 0 (0) 9999999999 (0) -------------------- Dropped packets will not show up in DDoS monitoring/protection counters as issue is not caused by anti-DDoS protection mechanisms. This issue affects: Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S7 on NFX250, QFX5K Series, EX4600; 17.4 versions prior to 17.4R2-S11, 17.4R3-S3 on NFX250, QFX5K Series, EX4600; 18.1 versions prior to 18.1R3-S9 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4600; 18.2 versions prior to 18.2R3-S3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600; 18.3 versions prior to 18.3R3-S1 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.2 versions prior to 19.2R1-S5, 19.2R2 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.3 versions prior to 19.3R2-S3, 19.3R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.4 versions prior to 19.4R1-S2, 19.4R2 on NFX250, NFX350, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series. This issue does not affect Junos OS releases prior to 17.2R2.
Metrics
No CVSS v4.0
Attack Vector Network
Attack Complexity Low
Privileges Required None
Scope Unchanged
Confidentiality Impact None
Integrity Impact None
Availability Impact High
User Interaction None
No CVSS v3.0
Access Vector Network
Access Complexity Low
Authentication None
Confidentiality Impact None
Integrity Impact None
Availability Impact Partial
AV:N/AC:L/Au:N/C:N/I:N/A:P
This CVE is not in the KEV list.
Key SSVC decision points have not yet been added.
Affected Vendors & Products
Vendors | Products |
---|---|
Juniper |
|
Configuration 1 [-]
AND |
|
Configuration 2 [-]
AND |
|
Configuration 3 [-]
AND |
|
Configuration 4 [-]
AND |
|
No data.
References
Link | Providers |
---|---|
https://kb.juniper.net/JSA11097 |
History
No history.
MITRE
Status: PUBLISHED
Assigner: juniper
Published: 2021-01-15T17:35:54.872808Z
Updated: 2024-09-17T02:21:57.975Z
Reserved: 2020-10-27T00:00:00
Link: CVE-2021-0207
Vulnrichment
No data.
NVD
Status : Analyzed
Published: 2021-01-15T18:15:14.840
Modified: 2021-02-05T16:49:04.040
Link: CVE-2021-0207
Redhat
No data.