{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2021-47065", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-02-29T22:33:44.296Z", "datePublished": "2024-02-29T22:37:39.135Z", "dateUpdated": "2025-05-04T07:03:28.649Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T07:03:28.649Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nrtw88: Fix array overrun in rtw_get_tx_power_params()\n\nUsing a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the\nfollowing array overrun is logged:\n\n================================================================================\nUBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34\nindex 5 is out of range for type 'u8 [5]'\nCPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651\nHardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014\nWorkqueue: phy0 ieee80211_scan_work [mac80211]\nCall Trace:\n dump_stack+0x64/0x7c\n ubsan_epilogue+0x5/0x40\n __ubsan_handle_out_of_bounds.cold+0x43/0x48\n rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]\n ? rtw_pci_read16+0x20/0x20 [rtw_pci]\n ? check_hw_ready+0x50/0x90 [rtw_core]\n rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]\n rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]\n rtw_set_channel+0xab/0x110 [rtw_core]\n rtw_ops_config+0x87/0xc0 [rtw_core]\n ieee80211_hw_config+0x9d/0x130 [mac80211]\n ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]\n ieee80211_scan_work+0x19f/0x2a0 [mac80211]\n process_one_work+0x1dd/0x3a0\n worker_thread+0x49/0x330\n ? rescuer_thread+0x3a0/0x3a0\n kthread+0x134/0x150\n ? kthread_create_worker_on_cpu+0x70/0x70\n ret_from_fork+0x22/0x30\n================================================================================\n\nThe statement where an array is being overrun is shown in the following snippet:\n\n\tif (rate <= DESC_RATE11M)\n\t\ttx_power = pwr_idx_2g->cck_base[group];\n\telse\n====>\t\ttx_power = pwr_idx_2g->bw40_base[group];\n\nThe associated arrays are defined in main.h as follows:\n\nstruct rtw_2g_txpwr_idx {\n\tu8 cck_base[6];\n\tu8 bw40_base[5];\n\tstruct rtw_2g_1s_pwr_idx_diff ht_1s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_2s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_3s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_4s_diff;\n};\n\nThe problem arises because the value of group is 5 for channel 14. The trivial\nincrease in the dimension of bw40_base fails as this struct must match the layout of\nefuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set\nthe group for channel 14 to 4 if rate <= DESC_RATE11M.\n\nThis patch fixes commit fa6dfe6bff24 (\"rtw88: resolve order of tx power setting routines\")"}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/wireless/realtek/rtw88/phy.c"], "versions": [{"version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb", "status": "affected", "versionType": "git"}, {"version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "95fb153c6027924cda3422120169d1890737f3a0", "status": "affected", "versionType": "git"}, {"version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a", "status": "affected", "versionType": "git"}, {"version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "9cd09722e18a08b6a3d68b8bccfac39ddc22434c", "status": "affected", "versionType": "git"}, {"version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/wireless/realtek/rtw88/phy.c"], "versions": [{"version": "5.3", "status": "affected"}, {"version": "0", "lessThan": "5.3", "status": "unaffected", "versionType": "semver"}, {"version": "5.4.119", "lessThanOrEqual": "5.4.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.10.37", "lessThanOrEqual": "5.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.11.21", "lessThanOrEqual": "5.11.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.12.4", "lessThanOrEqual": "5.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.13", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.3", "versionEndExcluding": "5.4.119"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.3", "versionEndExcluding": "5.10.37"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.3", "versionEndExcluding": "5.11.21"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.3", "versionEndExcluding": "5.12.4"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.3", "versionEndExcluding": "5.13"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb"}, {"url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0"}, {"url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a"}, {"url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c"}, {"url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e"}], "title": "rtw88: Fix array overrun in rtw_get_tx_power_params()", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2021-47065", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-03-06T19:40:45.781001Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-06-04T17:13:26.150Z"}}, {"providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-04T05:24:39.558Z"}, "title": "CVE Program Container", "references": [{"url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e", "tags": ["x_transferred"]}]}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CVE Program Container", "references": [{"url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e", "tags": ["x_transferred"]}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-04T05:24:39.558Z"}}, {"metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2021-47065", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-03-06T19:40:45.781001Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-05-23T19:01:16.171Z"}, "title": "CISA ADP Vulnrichment"}], "cna": {"title": "rtw88: Fix array overrun in rtw_get_tx_power_params()", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb", "versionType": "git"}, {"status": "affected", "version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "95fb153c6027924cda3422120169d1890737f3a0", "versionType": "git"}, {"status": "affected", "version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a", "versionType": "git"}, {"status": "affected", "version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "9cd09722e18a08b6a3d68b8bccfac39ddc22434c", "versionType": "git"}, {"status": "affected", "version": "fa6dfe6bff246ddd5be3cfe81637f137acd6c294", "lessThan": "2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e", "versionType": "git"}], "programFiles": ["drivers/net/wireless/realtek/rtw88/phy.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "5.3"}, {"status": "unaffected", "version": "0", "lessThan": "5.3", "versionType": "semver"}, {"status": "unaffected", "version": "5.4.119", "versionType": "semver", "lessThanOrEqual": "5.4.*"}, {"status": "unaffected", "version": "5.10.37", "versionType": "semver", "lessThanOrEqual": "5.10.*"}, {"status": "unaffected", "version": "5.11.21", "versionType": "semver", "lessThanOrEqual": "5.11.*"}, {"status": "unaffected", "version": "5.12.4", "versionType": "semver", "lessThanOrEqual": "5.12.*"}, {"status": "unaffected", "version": "5.13", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["drivers/net/wireless/realtek/rtw88/phy.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb"}, {"url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0"}, {"url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a"}, {"url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c"}, {"url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e"}], "x_generator": {"engine": "bippy-1.2.0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nrtw88: Fix array overrun in rtw_get_tx_power_params()\n\nUsing a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the\nfollowing array overrun is logged:\n\n================================================================================\nUBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34\nindex 5 is out of range for type 'u8 [5]'\nCPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651\nHardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014\nWorkqueue: phy0 ieee80211_scan_work [mac80211]\nCall Trace:\n dump_stack+0x64/0x7c\n ubsan_epilogue+0x5/0x40\n __ubsan_handle_out_of_bounds.cold+0x43/0x48\n rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]\n ? rtw_pci_read16+0x20/0x20 [rtw_pci]\n ? check_hw_ready+0x50/0x90 [rtw_core]\n rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]\n rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]\n rtw_set_channel+0xab/0x110 [rtw_core]\n rtw_ops_config+0x87/0xc0 [rtw_core]\n ieee80211_hw_config+0x9d/0x130 [mac80211]\n ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]\n ieee80211_scan_work+0x19f/0x2a0 [mac80211]\n process_one_work+0x1dd/0x3a0\n worker_thread+0x49/0x330\n ? rescuer_thread+0x3a0/0x3a0\n kthread+0x134/0x150\n ? kthread_create_worker_on_cpu+0x70/0x70\n ret_from_fork+0x22/0x30\n================================================================================\n\nThe statement where an array is being overrun is shown in the following snippet:\n\n\tif (rate <= DESC_RATE11M)\n\t\ttx_power = pwr_idx_2g->cck_base[group];\n\telse\n====>\t\ttx_power = pwr_idx_2g->bw40_base[group];\n\nThe associated arrays are defined in main.h as follows:\n\nstruct rtw_2g_txpwr_idx {\n\tu8 cck_base[6];\n\tu8 bw40_base[5];\n\tstruct rtw_2g_1s_pwr_idx_diff ht_1s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_2s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_3s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_4s_diff;\n};\n\nThe problem arises because the value of group is 5 for channel 14. The trivial\nincrease in the dimension of bw40_base fails as this struct must match the layout of\nefuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set\nthe group for channel 14 to 4 if rate <= DESC_RATE11M.\n\nThis patch fixes commit fa6dfe6bff24 (\"rtw88: resolve order of tx power setting routines\")"}], "cpeApplicability": [{"nodes": [{"negate": false, "cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.4.119", "versionStartIncluding": "5.3"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.10.37", "versionStartIncluding": "5.3"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.11.21", "versionStartIncluding": "5.3"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.12.4", "versionStartIncluding": "5.3"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.13", "versionStartIncluding": "5.3"}], "operator": "OR"}]}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T07:03:28.649Z"}}}, "cveMetadata": {"cveId": "CVE-2021-47065", "state": "PUBLISHED", "dateUpdated": "2025-05-04T07:03:28.649Z", "dateReserved": "2024-02-29T22:33:44.296Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2024-02-29T22:37:39.135Z", "assignerShortName": "Linux"}, "dataVersion": "5.1"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "2196F00F-D829-48E9-87B7-31759423D345", "versionEndExcluding": "5.4.119", "versionStartIncluding": "5.3", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "7A4CF5D6-ACBA-4980-ABFD-3D7A53B5BB4E", "versionEndExcluding": "5.10.37", "versionStartIncluding": "5.5", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "8CBB94EC-EC33-4464-99C5-03E5542715F0", "versionEndExcluding": "5.11.21", "versionStartIncluding": "5.11", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "D8C7052F-1B7B-4327-9C2B-84EBF3243838", "versionEndExcluding": "5.12.4", "versionStartIncluding": "5.12", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nrtw88: Fix array overrun in rtw_get_tx_power_params()\n\nUsing a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the\nfollowing array overrun is logged:\n\n================================================================================\nUBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34\nindex 5 is out of range for type 'u8 [5]'\nCPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651\nHardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014\nWorkqueue: phy0 ieee80211_scan_work [mac80211]\nCall Trace:\n dump_stack+0x64/0x7c\n ubsan_epilogue+0x5/0x40\n __ubsan_handle_out_of_bounds.cold+0x43/0x48\n rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]\n ? rtw_pci_read16+0x20/0x20 [rtw_pci]\n ? check_hw_ready+0x50/0x90 [rtw_core]\n rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]\n rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]\n rtw_set_channel+0xab/0x110 [rtw_core]\n rtw_ops_config+0x87/0xc0 [rtw_core]\n ieee80211_hw_config+0x9d/0x130 [mac80211]\n ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]\n ieee80211_scan_work+0x19f/0x2a0 [mac80211]\n process_one_work+0x1dd/0x3a0\n worker_thread+0x49/0x330\n ? rescuer_thread+0x3a0/0x3a0\n kthread+0x134/0x150\n ? kthread_create_worker_on_cpu+0x70/0x70\n ret_from_fork+0x22/0x30\n================================================================================\n\nThe statement where an array is being overrun is shown in the following snippet:\n\n\tif (rate <= DESC_RATE11M)\n\t\ttx_power = pwr_idx_2g->cck_base[group];\n\telse\n====>\t\ttx_power = pwr_idx_2g->bw40_base[group];\n\nThe associated arrays are defined in main.h as follows:\n\nstruct rtw_2g_txpwr_idx {\n\tu8 cck_base[6];\n\tu8 bw40_base[5];\n\tstruct rtw_2g_1s_pwr_idx_diff ht_1s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_2s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_3s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_4s_diff;\n};\n\nThe problem arises because the value of group is 5 for channel 14. The trivial\nincrease in the dimension of bw40_base fails as this struct must match the layout of\nefuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set\nthe group for channel 14 to 4 if rate <= DESC_RATE11M.\n\nThis patch fixes commit fa6dfe6bff24 (\"rtw88: resolve order of tx power setting routines\")"}, {"lang": "es", "value": "En el kernel de Linux, se resolvi\u00f3 la siguiente vulnerabilidad: rtw88: corrige el desbordamiento de la matriz en rtw_get_tx_power_params() Al utilizar un kernel con el Verificador de estado de comportamiento indefinido (UBSAN) habilitado, se registra el siguiente desbordamiento de la matriz: ======== ==================================================== ====================== UBSAN: \u00edndice de matriz fuera de los l\u00edmites en /home/finger/wireless-drivers-next/drivers/net/wireless /realtek/rtw88/phy.c:1789:34 el \u00edndice 5 est\u00e1 fuera de rango para el tipo 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: GO 5.12.0-rc5-00086- gd88bba47038e-dirty #651 Nombre del hardware: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS versi\u00f3n 4.50 29/09/2014 Cola de trabajo: phy0 ieee80211_scan_work [mac80211] Seguimiento de llamadas: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan _handle_out_of_bounds.cold +0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc 0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+ 0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] Process_one_work+0x1dd/0x3a0 trabajador_thread+0x49/0x330? hilo_rescate+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ========================================== ========================================= Se muestra la declaraci\u00f3n donde se est\u00e1 invadiendo una matriz en el siguiente fragmento: if (rate &lt;= DESC_RATE11M) tx_power = pwr_idx_2g-&gt;cck_base[group]; else ====&gt; tx_power = pwr_idx_2g-&gt;bw40_base[grupo]; Las matrices asociadas se definen en main.h de la siguiente manera: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; estructura rtw_2g_1s_pwr_idx_diff ht_1s_diff; estructura rtw_2g_ns_pwr_idx_diff ht_2s_diff; estructura rtw_2g_ns_pwr_idx_diff ht_3s_diff; estructura rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; El problema surge porque el valor del grupo es 5 para el canal 14. El aumento trivial en la dimensi\u00f3n de bw40_base falla ya que esta estructura debe coincidir con el dise\u00f1o de efuse. La soluci\u00f3n es agregar la tasa como argumento a rtw_get_channel_group() y configurar el grupo para el canal 14 en 4 si la tasa &lt;= DESC_RATE11M. Este parche corrige la confirmaci\u00f3n fa6dfe6bff24 (\"rtw88: resolver el orden de las rutinas de configuraci\u00f3n de energ\u00eda de transmisi\u00f3n\")"}], "id": "CVE-2021-47065", "lastModified": "2024-12-10T17:54:50.497", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2024-02-29T23:15:08.000", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-129"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: rtw88: Fix array overrun in rtw_get_tx_power_params()", "id": "2267165", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2267165"}, "csaw": false, "cvss3": {"cvss3_base_score": "4.4", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N", "status": "draft"}, "cwe": "CWE-121", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nrtw88: Fix array overrun in rtw_get_tx_power_params()\nUsing a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the\nfollowing array overrun is logged:\n================================================================================\nUBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34\nindex 5 is out of range for type 'u8 [5]'\nCPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651\nHardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014\nWorkqueue: phy0 ieee80211_scan_work [mac80211]\nCall Trace:\ndump_stack+0x64/0x7c\nubsan_epilogue+0x5/0x40\n__ubsan_handle_out_of_bounds.cold+0x43/0x48\nrtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]\n? rtw_pci_read16+0x20/0x20 [rtw_pci]\n? check_hw_ready+0x50/0x90 [rtw_core]\nrtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]\nrtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]\nrtw_set_channel+0xab/0x110 [rtw_core]\nrtw_ops_config+0x87/0xc0 [rtw_core]\nieee80211_hw_config+0x9d/0x130 [mac80211]\nieee80211_scan_state_set_channel+0x81/0x170 [mac80211]\nieee80211_scan_work+0x19f/0x2a0 [mac80211]\nprocess_one_work+0x1dd/0x3a0\nworker_thread+0x49/0x330\n? rescuer_thread+0x3a0/0x3a0\nkthread+0x134/0x150\n? kthread_create_worker_on_cpu+0x70/0x70\nret_from_fork+0x22/0x30\n================================================================================\nThe statement where an array is being overrun is shown in the following snippet:\nif (rate <= DESC_RATE11M)\ntx_power = pwr_idx_2g->cck_base[group];\nelse\n====>tx_power = pwr_idx_2g->bw40_base[group];\nThe associated arrays are defined in main.h as follows:\nstruct rtw_2g_txpwr_idx {\nu8 cck_base[6];\nu8 bw40_base[5];\nstruct rtw_2g_1s_pwr_idx_diff ht_1s_diff;\nstruct rtw_2g_ns_pwr_idx_diff ht_2s_diff;\nstruct rtw_2g_ns_pwr_idx_diff ht_3s_diff;\nstruct rtw_2g_ns_pwr_idx_diff ht_4s_diff;\n};\nThe problem arises because the value of group is 5 for channel 14. The trivial\nincrease in the dimension of bw40_base fails as this struct must match the layout of\nefuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set\nthe group for channel 14 to 4 if rate <= DESC_RATE11M.\nThis patch fixes commit fa6dfe6bff24 (\"rtw88: resolve order of tx power setting routines\")"], "name": "CVE-2021-47065", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Out of support scope", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-02-29T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2021-47065\nhttps://nvd.nist.gov/vuln/detail/CVE-2021-47065\nhttps://lore.kernel.org/linux-cve-announce/2024022954-CVE-2021-47065-be1d@gregkh/T/#u"], "threat_severity": "Low"}

{}