{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2022-49192", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-02-26T01:49:39.287Z", "datePublished": "2025-02-26T01:55:38.609Z", "dateUpdated": "2025-05-04T08:31:58.822Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T08:31:58.822Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndrivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool\n\ncpsw_ethtool_begin directly returns the result of pm_runtime_get_sync\nwhen successful.\npm_runtime_get_sync returns -error code on failure and 0 on successful\nresume but also 1 when the device is already active. So the common case\nfor cpsw_ethtool_begin is to return 1. That leads to inconsistent calls\nto pm_runtime_put in the call-chain so that pm_runtime_put is called\none too many times and as result leaving the cpsw dev behind suspended.\n\nThe suspended cpsw dev leads to an access violation later on by\ndifferent parts of the cpsw driver.\n\nFix this by calling the return-friendly pm_runtime_resume_and_get\nfunction."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/ethernet/ti/cpsw_ethtool.c"], "versions": [{"version": "d43c65b05b848e0b2db1a6c78b02c189da3a95b5", "lessThan": "585dc196a08fccdcd1b7fcf473cf566b34c4b840", "status": "affected", "versionType": "git"}, {"version": "d43c65b05b848e0b2db1a6c78b02c189da3a95b5", "lessThan": "459080fab12b23c0526026e5cedbf3fabb5457cc", "status": "affected", "versionType": "git"}, {"version": "d43c65b05b848e0b2db1a6c78b02c189da3a95b5", "lessThan": "30ad11bff021a94aff6dab1ec9236fdfd884fbff", "status": "affected", "versionType": "git"}, {"version": "d43c65b05b848e0b2db1a6c78b02c189da3a95b5", "lessThan": "2844e2434385819f674d1fb4130c308c50ba681e", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/ethernet/ti/cpsw_ethtool.c"], "versions": [{"version": "5.15", "status": "affected"}, {"version": "0", "lessThan": "5.15", "status": "unaffected", "versionType": "semver"}, {"version": "5.15.33", "lessThanOrEqual": "5.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.16.19", "lessThanOrEqual": "5.16.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.17.2", "lessThanOrEqual": "5.17.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.18", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "5.15.33"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "5.16.19"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "5.17.2"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "5.18"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/585dc196a08fccdcd1b7fcf473cf566b34c4b840"}, {"url": "https://git.kernel.org/stable/c/459080fab12b23c0526026e5cedbf3fabb5457cc"}, {"url": "https://git.kernel.org/stable/c/30ad11bff021a94aff6dab1ec9236fdfd884fbff"}, {"url": "https://git.kernel.org/stable/c/2844e2434385819f674d1fb4130c308c50ba681e"}], "title": "drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "A2DC15C6-2357-4732-97E0-A8A511BB24BF", "versionEndExcluding": "5.15.33", "versionStartIncluding": "5.15", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "20C43679-0439-405A-B97F-685BEE50613B", "versionEndExcluding": "5.16.19", "versionStartIncluding": "5.16", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "210C679C-CF84-44A3-8939-E629C87E54BF", "versionEndExcluding": "5.17.2", "versionStartIncluding": "5.17", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndrivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool\n\ncpsw_ethtool_begin directly returns the result of pm_runtime_get_sync\nwhen successful.\npm_runtime_get_sync returns -error code on failure and 0 on successful\nresume but also 1 when the device is already active. So the common case\nfor cpsw_ethtool_begin is to return 1. That leads to inconsistent calls\nto pm_runtime_put in the call-chain so that pm_runtime_put is called\none too many times and as result leaving the cpsw dev behind suspended.\n\nThe suspended cpsw dev leads to an access violation later on by\ndifferent parts of the cpsw driver.\n\nFix this by calling the return-friendly pm_runtime_resume_and_get\nfunction."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: drivers: ethernet: cpsw: fix panic when interrumpe coaleceing is seted via ethtool cpsw_ethtool_begin directamente devuelve el resultado de pm_runtime_get_sync cuando es exitoso. pm_runtime_get_sync devuelve el c\u00f3digo de error en caso de fallo y 0 en caso de reanudaci\u00f3n exitosa, pero tambi\u00e9n 1 cuando el dispositivo ya est\u00e1 activo. Por lo tanto, el caso com\u00fan para cpsw_ethtool_begin es devolver 1. Eso lleva a llamadas inconsistentes a pm_runtime_put en la cadena de llamadas, de modo que pm_runtime_put se llama una vez de m\u00e1s y, como resultado, deja suspendido el cpsw dev. El cpsw dev suspendido lleva a una violaci\u00f3n de acceso m\u00e1s adelante por diferentes partes del controlador cpsw. Solucione esto llamando a la funci\u00f3n pm_runtime_resume_and_get, que es amigable con los retornos."}], "id": "CVE-2022-49192", "lastModified": "2025-10-21T11:56:44.643", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2025-02-26T07:00:56.287", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/2844e2434385819f674d1fb4130c308c50ba681e"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/30ad11bff021a94aff6dab1ec9236fdfd884fbff"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/459080fab12b23c0526026e5cedbf3fabb5457cc"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/585dc196a08fccdcd1b7fcf473cf566b34c4b840"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool", "id": "2347677", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2347677"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "details": ["In the Linux kernel, the following vulnerability has been resolved:\ndrivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool\ncpsw_ethtool_begin directly returns the result of pm_runtime_get_sync\nwhen successful.\npm_runtime_get_sync returns -error code on failure and 0 on successful\nresume but also 1 when the device is already active. So the common case\nfor cpsw_ethtool_begin is to return 1. That leads to inconsistent calls\nto pm_runtime_put in the call-chain so that pm_runtime_put is called\none too many times and as result leaving the cpsw dev behind suspended.\nThe suspended cpsw dev leads to an access violation later on by\ndifferent parts of the cpsw driver.\nFix this by calling the return-friendly pm_runtime_resume_and_get\nfunction."], "name": "CVE-2022-49192", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-02-26T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2022-49192\nhttps://nvd.nist.gov/vuln/detail/CVE-2022-49192\nhttps://lore.kernel.org/linux-cve-announce/2025022616-CVE-2022-49192-b1e7@gregkh/T"], "threat_severity": "Moderate"}

{"created": "2025-07-12T22:23:17.887976+00:00", "updated": "2025-07-12T22:23:17.888041+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}