{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2022-49985", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-06-18T10:57:27.386Z", "datePublished": "2025-06-18T11:00:47.251Z", "dateUpdated": "2025-06-18T11:00:47.251Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-06-18T11:00:47.251Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Don't use tnum_range on array range checking for poke descriptors\n\nHsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which\nis based on a customized syzkaller:\n\n BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0\n Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489\n CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1\n Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS\n 1.13.0-1ubuntu1.1 04/01/2014\n Call Trace:\n <TASK>\n dump_stack_lvl+0x9c/0xc9\n print_address_description.constprop.0+0x1f/0x1f0\n ? bpf_int_jit_compile+0x1257/0x13f0\n kasan_report.cold+0xeb/0x197\n ? kvmalloc_node+0x170/0x200\n ? bpf_int_jit_compile+0x1257/0x13f0\n bpf_int_jit_compile+0x1257/0x13f0\n ? arch_prepare_bpf_dispatcher+0xd0/0xd0\n ? rcu_read_lock_sched_held+0x43/0x70\n bpf_prog_select_runtime+0x3e8/0x640\n ? bpf_obj_name_cpy+0x149/0x1b0\n bpf_prog_load+0x102f/0x2220\n ? __bpf_prog_put.constprop.0+0x220/0x220\n ? find_held_lock+0x2c/0x110\n ? __might_fault+0xd6/0x180\n ? lock_downgrade+0x6e0/0x6e0\n ? lock_is_held_type+0xa6/0x120\n ? __might_fault+0x147/0x180\n __sys_bpf+0x137b/0x6070\n ? bpf_perf_link_attach+0x530/0x530\n ? new_sync_read+0x600/0x600\n ? __fget_files+0x255/0x450\n ? lock_downgrade+0x6e0/0x6e0\n ? fput+0x30/0x1a0\n ? ksys_write+0x1a8/0x260\n __x64_sys_bpf+0x7a/0xc0\n ? syscall_enter_from_user_mode+0x21/0x70\n do_syscall_64+0x3b/0x90\n entry_SYSCALL_64_after_hwframe+0x63/0xcd\n RIP: 0033:0x7f917c4e2c2d\n\nThe problem here is that a range of tnum_range(0, map->max_entries - 1) has\nlimited ability to represent the concrete tight range with the tnum as the\nset of resulting states from value + mask can result in a superset of the\nactual intended range, and as such a tnum_in(range, reg->var_off) check may\nyield true when it shouldn't, for example tnum_range(0, 2) would result in\n00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here\nrepresented by a less precise superset of {0, 1, 2, 3}. As the register is\nknown const scalar, really just use the concrete reg->var_off.value for the\nupper index check."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["kernel/bpf/verifier.c"], "versions": [{"version": "d2e4c1e6c2947269346054ac8937ccfe9e0bcc6b", "lessThan": "e8979807178434db8ceaa84dfcd44363e71e50bb", "status": "affected", "versionType": "git"}, {"version": "d2e4c1e6c2947269346054ac8937ccfe9e0bcc6b", "lessThan": "4f672112f8665102a5842c170be1713f8ff95919", "status": "affected", "versionType": "git"}, {"version": "d2e4c1e6c2947269346054ac8937ccfe9e0bcc6b", "lessThan": "a36df92c7ff7ecde2fb362241d0ab024dddd0597", "status": "affected", "versionType": "git"}, {"version": "d2e4c1e6c2947269346054ac8937ccfe9e0bcc6b", "lessThan": "a657182a5c5150cdfacb6640aad1d2712571a409", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["kernel/bpf/verifier.c"], "versions": [{"version": "5.5", "status": "affected"}, {"version": "0", "lessThan": "5.5", "status": "unaffected", "versionType": "semver"}, {"version": "5.10.140", "lessThanOrEqual": "5.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.15.64", "lessThanOrEqual": "5.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.19.6", "lessThanOrEqual": "5.19.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.0", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.5", "versionEndExcluding": "5.10.140"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.5", "versionEndExcluding": "5.15.64"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.5", "versionEndExcluding": "5.19.6"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.5", "versionEndExcluding": "6.0"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/e8979807178434db8ceaa84dfcd44363e71e50bb"}, {"url": "https://git.kernel.org/stable/c/4f672112f8665102a5842c170be1713f8ff95919"}, {"url": "https://git.kernel.org/stable/c/a36df92c7ff7ecde2fb362241d0ab024dddd0597"}, {"url": "https://git.kernel.org/stable/c/a657182a5c5150cdfacb6640aad1d2712571a409"}], "title": "bpf: Don't use tnum_range on array range checking for poke descriptors", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "A26216A8-920B-4892-A1EB-143451AFFC31", "versionEndExcluding": "5.10.140", "versionStartIncluding": "5.5", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "292F3687-ADC2-4F3D-9710-3BCAD11A52BE", "versionEndExcluding": "5.15.64", "versionStartIncluding": "5.11", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "89E99903-E16D-475D-954B-2BAC46C98262", "versionEndExcluding": "5.19.6", "versionStartIncluding": "5.16", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.0:rc1:*:*:*:*:*:*", "matchCriteriaId": "E8BD11A3-8643-49B6-BADE-5029A0117325", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.0:rc2:*:*:*:*:*:*", "matchCriteriaId": "5F0AD220-F6A9-4012-8636-155F1B841FAD", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.0:rc3:*:*:*:*:*:*", "matchCriteriaId": "A46498B3-78E1-4623-AAE1-94D29A42BE4E", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Don't use tnum_range on array range checking for poke descriptors\n\nHsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which\nis based on a customized syzkaller:\n\n BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0\n Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489\n CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1\n Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS\n 1.13.0-1ubuntu1.1 04/01/2014\n Call Trace:\n <TASK>\n dump_stack_lvl+0x9c/0xc9\n print_address_description.constprop.0+0x1f/0x1f0\n ? bpf_int_jit_compile+0x1257/0x13f0\n kasan_report.cold+0xeb/0x197\n ? kvmalloc_node+0x170/0x200\n ? bpf_int_jit_compile+0x1257/0x13f0\n bpf_int_jit_compile+0x1257/0x13f0\n ? arch_prepare_bpf_dispatcher+0xd0/0xd0\n ? rcu_read_lock_sched_held+0x43/0x70\n bpf_prog_select_runtime+0x3e8/0x640\n ? bpf_obj_name_cpy+0x149/0x1b0\n bpf_prog_load+0x102f/0x2220\n ? __bpf_prog_put.constprop.0+0x220/0x220\n ? find_held_lock+0x2c/0x110\n ? __might_fault+0xd6/0x180\n ? lock_downgrade+0x6e0/0x6e0\n ? lock_is_held_type+0xa6/0x120\n ? __might_fault+0x147/0x180\n __sys_bpf+0x137b/0x6070\n ? bpf_perf_link_attach+0x530/0x530\n ? new_sync_read+0x600/0x600\n ? __fget_files+0x255/0x450\n ? lock_downgrade+0x6e0/0x6e0\n ? fput+0x30/0x1a0\n ? ksys_write+0x1a8/0x260\n __x64_sys_bpf+0x7a/0xc0\n ? syscall_enter_from_user_mode+0x21/0x70\n do_syscall_64+0x3b/0x90\n entry_SYSCALL_64_after_hwframe+0x63/0xcd\n RIP: 0033:0x7f917c4e2c2d\n\nThe problem here is that a range of tnum_range(0, map->max_entries - 1) has\nlimited ability to represent the concrete tight range with the tnum as the\nset of resulting states from value + mask can result in a superset of the\nactual intended range, and as such a tnum_in(range, reg->var_off) check may\nyield true when it shouldn't, for example tnum_range(0, 2) would result in\n00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here\nrepresented by a less precise superset of {0, 1, 2, 3}. As the register is\nknown const scalar, really just use the concrete reg->var_off.value for the\nupper index check."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: bpf: No use tnum_range en la comprobaci\u00f3n del rango de matriz para los descriptores de poke Hsin-Wei inform\u00f3 un splat de KASAN activado por su fuzzer de tiempo de ejecuci\u00f3n BPF que se basa en un syzkaller personalizado: ERROR: KASAN: slab-out-of-bounds en bpf_int_jit_compile+0x1257/0x13f0 Lectura de tama\u00f1o 8 en la direcci\u00f3n ffff888004e90b58 por la tarea syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 No contaminado 5.19.0 #1 Nombre del hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 01/04/2014 Rastreo de llamadas: dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d El problema aqu\u00ed es que un rango de tnum_range(0, map-&gt;max_entries - 1) tiene una capacidad limitada para representar el rango estrecho concreto con el tnum como el conjunto de estados resultantes de value + mask puede resultar en un superconjunto del rango real deseado, y como tal una comprobaci\u00f3n tnum_in(range, reg-&gt;var_off) puede dar como resultado verdadero cuando no deber\u00eda, por ejemplo tnum_range(0, 2) dar\u00eda como resultado 00XX -&gt; v = 0000, m = 0011 de modo que el conjunto deseado de {0, 1, 2} est\u00e1 representado aqu\u00ed por un superconjunto menos preciso de {0, 1, 2, 3}. Como el registro es un escalar constante, simplemente use el valor concreto reg-&gt;var_off.value para la verificaci\u00f3n del \u00edndice superior."}], "id": "CVE-2022-49985", "lastModified": "2025-11-14T18:14:04.690", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.1, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.2, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2025-06-18T11:15:26.067", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/4f672112f8665102a5842c170be1713f8ff95919"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/a36df92c7ff7ecde2fb362241d0ab024dddd0597"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/a657182a5c5150cdfacb6640aad1d2712571a409"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/e8979807178434db8ceaa84dfcd44363e71e50bb"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-125"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: bpf: Don't use tnum_range on array range checking for poke descriptors", "id": "2373540", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2373540"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.0", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H", "status": "draft"}, "details": ["In the Linux kernel, the following vulnerability has been resolved:\nbpf: Don't use tnum_range on array range checking for poke descriptors\nHsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which\nis based on a customized syzkaller:\nBUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0\nRead of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489\nCPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS\n1.13.0-1ubuntu1.1 04/01/2014\nCall Trace:\n<TASK>\ndump_stack_lvl+0x9c/0xc9\nprint_address_description.constprop.0+0x1f/0x1f0\n? bpf_int_jit_compile+0x1257/0x13f0\nkasan_report.cold+0xeb/0x197\n? kvmalloc_node+0x170/0x200\n? bpf_int_jit_compile+0x1257/0x13f0\nbpf_int_jit_compile+0x1257/0x13f0\n? arch_prepare_bpf_dispatcher+0xd0/0xd0\n? rcu_read_lock_sched_held+0x43/0x70\nbpf_prog_select_runtime+0x3e8/0x640\n? bpf_obj_name_cpy+0x149/0x1b0\nbpf_prog_load+0x102f/0x2220\n? __bpf_prog_put.constprop.0+0x220/0x220\n? find_held_lock+0x2c/0x110\n? __might_fault+0xd6/0x180\n? lock_downgrade+0x6e0/0x6e0\n? lock_is_held_type+0xa6/0x120\n? __might_fault+0x147/0x180\n__sys_bpf+0x137b/0x6070\n? bpf_perf_link_attach+0x530/0x530\n? new_sync_read+0x600/0x600\n? __fget_files+0x255/0x450\n? lock_downgrade+0x6e0/0x6e0\n? fput+0x30/0x1a0\n? ksys_write+0x1a8/0x260\n__x64_sys_bpf+0x7a/0xc0\n? syscall_enter_from_user_mode+0x21/0x70\ndo_syscall_64+0x3b/0x90\nentry_SYSCALL_64_after_hwframe+0x63/0xcd\nRIP: 0033:0x7f917c4e2c2d\nThe problem here is that a range of tnum_range(0, map->max_entries - 1) has\nlimited ability to represent the concrete tight range with the tnum as the\nset of resulting states from value + mask can result in a superset of the\nactual intended range, and as such a tnum_in(range, reg->var_off) check may\nyield true when it shouldn't, for example tnum_range(0, 2) would result in\n00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here\nrepresented by a less precise superset of {0, 1, 2, 3}. As the register is\nknown const scalar, really just use the concrete reg->var_off.value for the\nupper index check."], "name": "CVE-2022-49985", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Under investigation", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Under investigation", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-06-18T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2022-49985\nhttps://nvd.nist.gov/vuln/detail/CVE-2022-49985\nhttps://lore.kernel.org/linux-cve-announce/2025061822-CVE-2022-49985-3e41@gregkh/T"], "threat_severity": "Moderate"}

{"created": "2025-06-23T08:20:14.601107+00:00", "updated": "2025-06-23T08:20:14.601159+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}