padata: fix UAF in padata_reorder
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/
Metrics
Affected Vendors & Products
| Source | ID | Title |
|---|---|---|
Debian DLA |
DLA-4102-1 | linux-6.1 security update |
Debian DLA |
DLA-4178-1 | linux security update |
EUVD |
EUVD-2025-5214 | In the Linux kernel, the following vulnerability has been resolved: padata: fix UAF in padata_reorder A bug was found when run ltp test: BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: <TASK> dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&pd->refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps->pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } In the padata_reorder function, when it loops in 'while', if the alg is deleted, the refcnt may be decreased to 0 before entering 'padata_find_next', which leads to UAF. As mentioned in [1], do_serial is supposed to be called with BHs disabled and always happen under RCU protection, to address this issue, add synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls to finish. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ |
Ubuntu USN |
USN-7510-1 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7510-2 | Linux kernel (FIPS) vulnerabilities |
Ubuntu USN |
USN-7510-3 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7510-4 | Linux kernel (Real-time) vulnerabilities |
Ubuntu USN |
USN-7510-5 | Linux kernel (Azure FIPS) vulnerabilities |
Ubuntu USN |
USN-7510-6 | Linux kernel (AWS FIPS) vulnerabilities |
Ubuntu USN |
USN-7510-7 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7510-8 | Linux kernel (AWS) vulnerabilities |
Ubuntu USN |
USN-7511-1 | Linux kernel (GCP) vulnerabilities |
Ubuntu USN |
USN-7511-2 | Linux kernel (GCP FIPS) vulnerabilities |
Ubuntu USN |
USN-7511-3 | Linux kernel (GKE) vulnerabilities |
Ubuntu USN |
USN-7512-1 | Linux kernel (GCP) vulnerabilities |
Ubuntu USN |
USN-7521-1 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7521-2 | Linux kernel (AWS) vulnerabilities |
Ubuntu USN |
USN-7521-3 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7593-1 | Linux kernel (HWE) vulnerabilities |
Ubuntu USN |
USN-7602-1 | Linux kernel (Xilinx ZynqMP) vulnerabilities |
Ubuntu USN |
USN-7651-1 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7651-2 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7651-3 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7651-4 | Linux kernel (GCP) vulnerabilities |
Ubuntu USN |
USN-7651-5 | Linux kernel (Raspberry Pi Real-time) vulnerabilities |
Ubuntu USN |
USN-7651-6 | Linux kernel (Raspberry Pi) vulnerabilities |
Ubuntu USN |
USN-7652-1 | Linux kernel (Real-time) vulnerabilities |
Ubuntu USN |
USN-7653-1 | Linux kernel (HWE) vulnerabilities |
Ubuntu USN |
USN-7737-1 | Linux kernel (Azure) vulnerabilities |
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
Mon, 03 Nov 2025 20:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| References |
|
Tue, 17 Jun 2025 06:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Redhat
Redhat enterprise Linux |
|
| Weaknesses | CWE-820 | |
| CPEs | cpe:/o:redhat:enterprise_linux:8 | |
| Vendors & Products |
Redhat
Redhat enterprise Linux |
Sat, 14 Jun 2025 15:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Metrics |
threat_severity
|
threat_severity
|
Mon, 24 Mar 2025 19:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
Thu, 13 Mar 2025 12:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| References |
|
Tue, 04 Mar 2025 03:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Metrics |
ssvc
|
Fri, 28 Feb 2025 02:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| References |
| |
| Metrics |
threat_severity
|
threat_severity
|
Thu, 27 Feb 2025 18:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-416 | |
| Metrics |
cvssV3_1
|
Thu, 27 Feb 2025 02:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: padata: fix UAF in padata_reorder A bug was found when run ltp test: BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: <TASK> dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&pd->refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps->pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } In the padata_reorder function, when it loops in 'while', if the alg is deleted, the refcnt may be decreased to 0 before entering 'padata_find_next', which leads to UAF. As mentioned in [1], do_serial is supposed to be called with BHs disabled and always happen under RCU protection, to address this issue, add synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls to finish. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ | |
| Title | padata: fix UAF in padata_reorder | |
| References |
|
|
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2025-11-03T19:36:30.604Z
Reserved: 2024-12-29T08:45:45.754Z
Link: CVE-2025-21727
Updated: 2025-02-27T17:58:07.900Z
Status : Modified
Published: 2025-02-27T02:15:16.423
Modified: 2025-11-03T20:17:12.810
Link: CVE-2025-21727
OpenCVE Enrichment
No data.
Debian DLA
EUVD
Ubuntu USN