{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2025-22011", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-12-29T08:45:45.804Z", "datePublished": "2025-04-08T08:18:01.074Z", "dateUpdated": "2025-10-01T18:14:52.265Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T07:27:33.923Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nARM: dts: bcm2711: Fix xHCI power-domain\n\nDuring s2idle tests on the Raspberry CM4 the VPU firmware always crashes\non xHCI power-domain resume:\n\nroot@raspberrypi:/sys/power# echo freeze > state\n[ 70.724347] xhci_suspend finished\n[ 70.727730] xhci_plat_suspend finished\n[ 70.755624] bcm2835-power bcm2835-power: Power grafx off\n[ 70.761127] USB: Set power to 0\n\n[ 74.653040] USB: Failed to set power to 1 (-110)\n\nThis seems to be caused because of the mixed usage of\nraspberrypi-power and bcm2835-power at the same time. So avoid\nthe usage of the VPU firmware power-domain driver, which\nprevents the VPU crash."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi", "arch/arm/boot/dts/broadcom/bcm2711.dtsi"], "versions": [{"version": "522c35e08b53f157ad3e51848caa861b258001e4", "lessThan": "b8a47aa0b3df701d0fc41b3caf78d00571776be0", "status": "affected", "versionType": "git"}, {"version": "522c35e08b53f157ad3e51848caa861b258001e4", "lessThan": "393947e06867923d4c2be380d46efd03407a8ce2", "status": "affected", "versionType": "git"}, {"version": "522c35e08b53f157ad3e51848caa861b258001e4", "lessThan": "f44fa354a0715577ca32b085f6f60bcf32c748dd", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi", "arch/arm/boot/dts/broadcom/bcm2711.dtsi"], "versions": [{"version": "6.8", "status": "affected"}, {"version": "0", "lessThan": "6.8", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.21", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.13.9", "lessThanOrEqual": "6.13.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.14", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.8", "versionEndExcluding": "6.12.21"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.8", "versionEndExcluding": "6.13.9"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.8", "versionEndExcluding": "6.14"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/b8a47aa0b3df701d0fc41b3caf78d00571776be0"}, {"url": "https://git.kernel.org/stable/c/393947e06867923d4c2be380d46efd03407a8ce2"}, {"url": "https://git.kernel.org/stable/c/f44fa354a0715577ca32b085f6f60bcf32c748dd"}], "title": "ARM: dts: bcm2711: Fix xHCI power-domain", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"problemTypes": [{"descriptions": [{"type": "CWE", "lang": "en", "description": "CWE-noinfo Not enough information"}]}], "metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 5.5, "attackVector": "LOCAL", "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "integrityImpact": "NONE", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "NONE"}}, {"other": {"type": "ssvc", "content": {"timestamp": "2025-10-01T18:13:34.737880Z", "id": "CVE-2025-22011", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "role": "CISA Coordinator", "version": "2.0.3"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-10-01T18:14:52.265Z"}}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 5.5, "attackVector": "LOCAL", "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "integrityImpact": "NONE", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "NONE"}}, {"other": {"type": "ssvc", "content": {"id": "CVE-2025-22011", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2025-10-01T18:13:34.737880Z"}}}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "description": "CWE-noinfo Not enough information"}]}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-10-01T14:39:50.448Z"}}], "cna": {"title": "ARM: dts: bcm2711: Fix xHCI power-domain", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "522c35e08b53f157ad3e51848caa861b258001e4", "lessThan": "b8a47aa0b3df701d0fc41b3caf78d00571776be0", "versionType": "git"}, {"status": "affected", "version": "522c35e08b53f157ad3e51848caa861b258001e4", "lessThan": "393947e06867923d4c2be380d46efd03407a8ce2", "versionType": "git"}, {"status": "affected", "version": "522c35e08b53f157ad3e51848caa861b258001e4", "lessThan": "f44fa354a0715577ca32b085f6f60bcf32c748dd", "versionType": "git"}], "programFiles": ["arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi", "arch/arm/boot/dts/broadcom/bcm2711.dtsi"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "6.8"}, {"status": "unaffected", "version": "0", "lessThan": "6.8", "versionType": "semver"}, {"status": "unaffected", "version": "6.12.21", "versionType": "semver", "lessThanOrEqual": "6.12.*"}, {"status": "unaffected", "version": "6.13.9", "versionType": "semver", "lessThanOrEqual": "6.13.*"}, {"status": "unaffected", "version": "6.14", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi", "arch/arm/boot/dts/broadcom/bcm2711.dtsi"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/b8a47aa0b3df701d0fc41b3caf78d00571776be0"}, {"url": "https://git.kernel.org/stable/c/393947e06867923d4c2be380d46efd03407a8ce2"}, {"url": "https://git.kernel.org/stable/c/f44fa354a0715577ca32b085f6f60bcf32c748dd"}], "x_generator": {"engine": "bippy-1.2.0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nARM: dts: bcm2711: Fix xHCI power-domain\n\nDuring s2idle tests on the Raspberry CM4 the VPU firmware always crashes\non xHCI power-domain resume:\n\nroot@raspberrypi:/sys/power# echo freeze > state\n[ 70.724347] xhci_suspend finished\n[ 70.727730] xhci_plat_suspend finished\n[ 70.755624] bcm2835-power bcm2835-power: Power grafx off\n[ 70.761127] USB: Set power to 0\n\n[ 74.653040] USB: Failed to set power to 1 (-110)\n\nThis seems to be caused because of the mixed usage of\nraspberrypi-power and bcm2835-power at the same time. So avoid\nthe usage of the VPU firmware power-domain driver, which\nprevents the VPU crash."}], "cpeApplicability": [{"nodes": [{"negate": false, "cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.12.21", "versionStartIncluding": "6.8"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.13.9", "versionStartIncluding": "6.8"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.14", "versionStartIncluding": "6.8"}], "operator": "OR"}]}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T07:27:33.923Z"}}}, "cveMetadata": {"cveId": "CVE-2025-22011", "state": "PUBLISHED", "dateUpdated": "2025-10-01T18:14:52.265Z", "dateReserved": "2024-12-29T08:45:45.804Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2025-04-08T08:18:01.074Z", "assignerShortName": "Linux"}, "dataVersion": "5.1"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "BF90340F-6FF6-4A1E-BAA7-7C640D39CCDD", "versionEndExcluding": "6.12.21", "versionStartIncluding": "6.8", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "FAECBE4D-58CF-4836-BBAB-5E28B800A778", "versionEndExcluding": "6.13.9", "versionStartIncluding": "6.13", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc1:*:*:*:*:*:*", "matchCriteriaId": "186716B6-2B66-4BD0-852E-D48E71C0C85F", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc2:*:*:*:*:*:*", "matchCriteriaId": "0D3E781C-403A-498F-9DA9-ECEE50F41E75", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc3:*:*:*:*:*:*", "matchCriteriaId": "66619FB8-0AAF-4166-B2CF-67B24143261D", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc4:*:*:*:*:*:*", "matchCriteriaId": "D3D6550E-6679-4560-902D-AF52DCFE905B", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc5:*:*:*:*:*:*", "matchCriteriaId": "45B90F6B-BEC7-4D4E-883A-9DBADE021750", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc6:*:*:*:*:*:*", "matchCriteriaId": "1759FFB7-531C-41B1-9AE1-FD3D80E0D920", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc7:*:*:*:*:*:*", "matchCriteriaId": "AD948719-8628-4421-A340-1066314BBD4A", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nARM: dts: bcm2711: Fix xHCI power-domain\n\nDuring s2idle tests on the Raspberry CM4 the VPU firmware always crashes\non xHCI power-domain resume:\n\nroot@raspberrypi:/sys/power# echo freeze > state\n[ 70.724347] xhci_suspend finished\n[ 70.727730] xhci_plat_suspend finished\n[ 70.755624] bcm2835-power bcm2835-power: Power grafx off\n[ 70.761127] USB: Set power to 0\n\n[ 74.653040] USB: Failed to set power to 1 (-110)\n\nThis seems to be caused because of the mixed usage of\nraspberrypi-power and bcm2835-power at the same time. So avoid\nthe usage of the VPU firmware power-domain driver, which\nprevents the VPU crash."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ARM: dts: bcm2711: Reparar xHCI power-domain Durante las pruebas s2idle en Raspberry CM4, el firmware de la VPU siempre falla en xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze > state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Apagar grafx [ 70.761127] USB: Establecer la energ\u00eda en 0 [ 74.653040] USB: No se pudo establecer la energ\u00eda en 1 (-110) Esto parece deberse al uso mixto de raspberrypi-power y bcm2835-power al mismo tiempo. Por lo tanto, evite el uso del controlador de dominio de energ\u00eda del firmware VPU, lo que evita el bloqueo de la VPU."}], "id": "CVE-2025-22011", "lastModified": "2025-10-01T19:15:35.163", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}, {"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary"}]}, "published": "2025-04-08T09:15:25.020", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/393947e06867923d4c2be380d46efd03407a8ce2"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/b8a47aa0b3df701d0fc41b3caf78d00571776be0"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/f44fa354a0715577ca32b085f6f60bcf32c748dd"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: ARM: dts: bcm2711: Fix xHCI power-domain", "id": "2358235", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2358235"}, "csaw": false, "cvss3": {"cvss3_base_score": "4.4", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "cwe": "CWE-20", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nARM: dts: bcm2711: Fix xHCI power-domain\nDuring s2idle tests on the Raspberry CM4 the VPU firmware always crashes\non xHCI power-domain resume:\nroot@raspberrypi:/sys/power# echo freeze > state\n[ 70.724347] xhci_suspend finished\n[ 70.727730] xhci_plat_suspend finished\n[ 70.755624] bcm2835-power bcm2835-power: Power grafx off\n[ 70.761127] USB: Set power to 0\n[ 74.653040] USB: Failed to set power to 1 (-110)\nThis seems to be caused because of the mixed usage of\nraspberrypi-power and bcm2835-power at the same time. So avoid\nthe usage of the VPU firmware power-domain driver, which\nprevents the VPU crash."], "name": "CVE-2025-22011", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-04-08T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2025-22011\nhttps://nvd.nist.gov/vuln/detail/CVE-2025-22011\nhttps://lore.kernel.org/linux-cve-announce/2025040843-CVE-2025-22011-9e83@gregkh/T"], "threat_severity": "Low"}

{}