iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that.
Metrics
Affected Vendors & Products
| Source | ID | Title |
|---|---|---|
EUVD |
EUVD-2025-14154 | In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() Two WARNINGs are observed when SMMU driver rolls back upon failure: arm-smmu-v3.9.auto: Failed to register iommu arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8 Call trace: dmam_free_coherent+0xc0/0xd8 (P) tegra241_vintf_free_lvcmdq+0x74/0x188 tegra241_cmdqv_remove_vintf+0x60/0x148 tegra241_cmdqv_remove+0x48/0xc8 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 ------------[ cut here ]------------ 128 pages are still in use! WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8 Call trace: free_contig_range+0x18c/0x1c8 (P) cma_release+0x154/0x2f0 dma_free_contiguous+0x38/0xa0 dma_direct_free+0x10c/0x248 dma_free_attrs+0x100/0x290 dmam_free_coherent+0x78/0xd8 tegra241_vintf_free_lvcmdq+0x74/0x160 tegra241_cmdqv_remove+0x98/0x198 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 This is because the LVCMDQ queue memory are managed by devres, while that dmam_free_coherent() is called in the context of devm_action_release(). Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres callbacks if ops->device_remove() is going to be manually freeing things that probe allocated": https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/ In fact, tegra241_cmdqv_init_structures() only allocates memory resources which means any failure that it generates would be similar to -ENOMEM, so there is no point in having that "falling back to standard SMMU" routine, as the standard SMMU would likely fail to allocate memory too. Remove the unwind part in tegra241_cmdqv_init_structures(), and return a proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since devres will take care of that. |
Ubuntu USN |
USN-7594-1 | Linux kernel vulnerabilities |
Ubuntu USN |
USN-7594-2 | Linux kernel (Azure) vulnerabilities |
Ubuntu USN |
USN-7594-3 | Linux kernel vulnerabilities |
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
Fri, 14 Nov 2025 20:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Linux
Linux linux Kernel |
|
| Weaknesses | NVD-CWE-noinfo | |
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:6.15:rc1:*:*:*:*:*:* |
|
| Vendors & Products |
Linux
Linux linux Kernel |
|
| Metrics |
cvssV3_1
|
cvssV3_1
|
Wed, 16 Jul 2025 13:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Metrics |
epss
|
epss
|
Wed, 21 May 2025 06:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Metrics |
cvssV3_1
|
cvssV3_1
|
Sat, 10 May 2025 02:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| References |
| |
| Metrics |
threat_severity
|
cvssV3_1
|
Fri, 09 May 2025 07:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() Two WARNINGs are observed when SMMU driver rolls back upon failure: arm-smmu-v3.9.auto: Failed to register iommu arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8 Call trace: dmam_free_coherent+0xc0/0xd8 (P) tegra241_vintf_free_lvcmdq+0x74/0x188 tegra241_cmdqv_remove_vintf+0x60/0x148 tegra241_cmdqv_remove+0x48/0xc8 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 ------------[ cut here ]------------ 128 pages are still in use! WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8 Call trace: free_contig_range+0x18c/0x1c8 (P) cma_release+0x154/0x2f0 dma_free_contiguous+0x38/0xa0 dma_direct_free+0x10c/0x248 dma_free_attrs+0x100/0x290 dmam_free_coherent+0x78/0xd8 tegra241_vintf_free_lvcmdq+0x74/0x160 tegra241_cmdqv_remove+0x98/0x198 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 This is because the LVCMDQ queue memory are managed by devres, while that dmam_free_coherent() is called in the context of devm_action_release(). Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres callbacks if ops->device_remove() is going to be manually freeing things that probe allocated": https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/ In fact, tegra241_cmdqv_init_structures() only allocates memory resources which means any failure that it generates would be similar to -ENOMEM, so there is no point in having that "falling back to standard SMMU" routine, as the standard SMMU would likely fail to allocate memory too. Remove the unwind part in tegra241_cmdqv_init_structures(), and return a proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since devres will take care of that. | |
| Title | iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() | |
| References |
|
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2025-05-26T05:21:58.878Z
Reserved: 2025-04-16T04:51:23.952Z
Link: CVE-2025-37837
No data.
Status : Analyzed
Published: 2025-05-09T07:16:04.467
Modified: 2025-11-14T20:00:56.753
Link: CVE-2025-37837
OpenCVE Enrichment
No data.
EUVD
Ubuntu USN