CVE-2025-38376

usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume

Published Jul 25, 2025 CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Description
In the Linux kernel, the following vulnerability has been resolved:

usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume

Shawn and John reported a hang issue during system suspend as below:

- USB gadget is enabled as Ethernet
- There is data transfer over USB Ethernet (scp a big file between host
and device)
- Device is going in/out suspend (echo mem > /sys/power/state)

The root cause is the USB device controller is suspended but the USB bus
is still active which caused the USB host continues to transfer data with
device and the device continues to queue USB requests (in this case, a
delayed TCP ACK packet trigger the issue) after controller is suspended,
however the USB controller clock is already gated off. Then if udc driver
access registers after that point, the system will hang.

The correct way to avoid such issue is to disconnect device from host when
the USB bus is not at suspend state. Then the host will receive disconnect
event and stop data transfer in time. To continue make USB gadget device
work after system resume, this will reconnect device automatically.

To make usb wakeup work if USB bus is already at suspend state, this will
keep connection for it only when USB device controller has enabled wakeup
capability.

Analysis

No analysis available yet

Remediation

No remediation available yet

Tracking

Sign in to view the affected projects.

Advisories

Source ID Title
EUVD EUVD EUVD-2025-22627 In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability.
Ubuntu USN Ubuntu USN USN-7833-1 Linux kernel vulnerabilities
Ubuntu USN Ubuntu USN USN-7834-1 Linux kernel (Azure) vulnerabilities
Ubuntu USN Ubuntu USN USN-7833-2 Linux kernel (Real-time) vulnerabilities
Ubuntu USN Ubuntu USN USN-7833-3 Linux kernel (AWS) vulnerabilities
Ubuntu USN Ubuntu USN USN-7833-4 Linux kernel (GCP) vulnerabilities
Ubuntu USN Ubuntu USN USN-7856-1 Linux kernel (HWE) vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-1 Linux kernel vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-2 Linux kernel (Real-time) vulnerabilities
Ubuntu USN Ubuntu USN USN-8031-1 Linux kernel (GCP) vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-3 Linux kernel (Real-time) vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-4 Linux kernel (FIPS) vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-5 Linux kernel vulnerabilities
Ubuntu USN Ubuntu USN USN-8031-2 Linux kernel (GCP FIPS) vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-6 Linux kernel (HWE) vulnerabilities
Ubuntu USN Ubuntu USN USN-8031-3 Linux kernel vulnerabilities
Ubuntu USN Ubuntu USN USN-8052-1 Linux kernel (Low Latency) vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-7 Linux kernel (Low Latency NVIDIA) vulnerabilities
Ubuntu USN Ubuntu USN USN-8028-8 Linux kernel (IBM) vulnerabilities
Ubuntu USN Ubuntu USN USN-8052-2 Linux kernel (Xilinx) vulnerabilities
Ubuntu USN Ubuntu USN USN-8074-1 Linux kernel (Azure) vulnerabilities
Ubuntu USN Ubuntu USN USN-8074-2 Linux kernel (Azure FIPS) vulnerabilities
Ubuntu USN Ubuntu USN USN-8126-1 Linux kernel (Azure) vulnerabilities
History
Type Values Removed Values Added
Weaknesses NVD-CWE-noinfo
CPEs cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:6.16:rc1:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:6.16:rc2:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:6.16:rc3:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:6.16:rc4:*:*:*:*:*:*
Type Values Removed Values Added
References
Metrics threat_severity

None

cvssV3_1

{'score': 5.5, 'vector': 'CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H'}

threat_severity

Moderate

Type Values Removed Values Added
First Time appeared Linux
Linux linux Kernel
Vendors & Products Linux
Linux linux Kernel
Type Values Removed Values Added
Description In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability.
Title usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
References
Weaknesses

Sources

Status
PUBLISHED
Assigner
Linux
Published
Updated
May 11, 2026, 9:26 PM
Reserved
Apr 16, 2025, 4:51 AM
Status
Analyzed
Published
Jul 25, 2025, 1:15 PM
Modified
Jun 17, 2026, 9:16 AM
Severity
Moderate
Public date
Jul 25, 2025, 12:00 AM