In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
Add the SM6115 MDSS compatible to clients compatible list, as it also
needs that workaround.
Without this workaround, for example, QRB4210 RB2 which is based on
SM4250/SM6115 generates a lot of smmu unhandled context faults during
boot:
arm_smmu_context_fault: 116854 callbacks suppressed
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
and also failed initialisation of lontium lt9611uxc, gpu and dpu is
observed:
(binding MDSS components triggered by lt9611uxc have failed)
------------[ cut here ]------------
!aspace
WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm]
Modules linked in: ... (long list of modules)
CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT
Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : msm_gem_vma_init+0x150/0x18c [msm]
lr : msm_gem_vma_init+0x150/0x18c [msm]
sp : ffff80008144b280
...
Call trace:
msm_gem_vma_init+0x150/0x18c [msm] (P)
get_vma_locked+0xc0/0x194 [msm]
msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm]
msm_gem_kernel_new+0x48/0x160 [msm]
msm_gpu_init+0x34c/0x53c [msm]
adreno_gpu_init+0x1b0/0x2d8 [msm]
a6xx_gpu_init+0x1e8/0x9e0 [msm]
adreno_bind+0x2b8/0x348 [msm]
component_bind_all+0x100/0x230
msm_drm_bind+0x13c/0x3d0 [msm]
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa4/0x174
component_add+0x14/0x20
dsi_dev_attach+0x20/0x34 [msm]
dsi_host_attach+0x58/0x98 [msm]
devm_mipi_dsi_attach+0x34/0x90
lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc]
lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc]
i2c_device_probe+0x148/0x2a8
really_probe+0xbc/0x2c0
__driver_probe_device+0x78/0x120
driver_probe_device+0x3c/0x154
__driver_attach+0x90/0x1a0
bus_for_each_dev+0x68/0xb8
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x68/0x124
i2c_register_driver+0x48/0xcc
lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc]
do_one_initcall+0x60/0x1d4
do_init_module+0x54/0x1fc
load_module+0x1748/0x1c8c
init_module_from_file+0x74/0xa0
__arm64_sys_finit_module+0x130/0x2f8
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x2c/0x80
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22
msm_dpu 5e01000.display-controller: failed to load adreno gpu
platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19
msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22
msm_dpu 5e01000.display-controller: adev bind failed: -22
lt9611uxc 0-002b: failed to attach dsi to host
lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22
iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
Add the SM6115 MDSS compatible to clients compatible list, as it also
needs that workaround.
Without this workaround, for example, QRB4210 RB2 which is based on
SM4250/SM6115 generates a lot of smmu unhandled context faults during
boot:
arm_smmu_context_fault: 116854 callbacks suppressed
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
and also failed initialisation of lontium lt9611uxc, gpu and dpu is
observed:
(binding MDSS components triggered by lt9611uxc have failed)
------------[ cut here ]------------
!aspace
WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm]
Modules linked in: ... (long list of modules)
CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT
Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : msm_gem_vma_init+0x150/0x18c [msm]
lr : msm_gem_vma_init+0x150/0x18c [msm]
sp : ffff80008144b280
...
Call trace:
msm_gem_vma_init+0x150/0x18c [msm] (P)
get_vma_locked+0xc0/0x194 [msm]
msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm]
msm_gem_kernel_new+0x48/0x160 [msm]
msm_gpu_init+0x34c/0x53c [msm]
adreno_gpu_init+0x1b0/0x2d8 [msm]
a6xx_gpu_init+0x1e8/0x9e0 [msm]
adreno_bind+0x2b8/0x348 [msm]
component_bind_all+0x100/0x230
msm_drm_bind+0x13c/0x3d0 [msm]
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa4/0x174
component_add+0x14/0x20
dsi_dev_attach+0x20/0x34 [msm]
dsi_host_attach+0x58/0x98 [msm]
devm_mipi_dsi_attach+0x34/0x90
lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc]
lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc]
i2c_device_probe+0x148/0x2a8
really_probe+0xbc/0x2c0
__driver_probe_device+0x78/0x120
driver_probe_device+0x3c/0x154
__driver_attach+0x90/0x1a0
bus_for_each_dev+0x68/0xb8
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x68/0x124
i2c_register_driver+0x48/0xcc
lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc]
do_one_initcall+0x60/0x1d4
do_init_module+0x54/0x1fc
load_module+0x1748/0x1c8c
init_module_from_file+0x74/0xa0
__arm64_sys_finit_module+0x130/0x2f8
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x2c/0x80
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22
msm_dpu 5e01000.display-controller: failed to load adreno gpu
platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19
msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22
msm_dpu 5e01000.display-controller: adev bind failed: -22
lt9611uxc 0-002b: failed to attach dsi to host
lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22
Metrics
Affected Vendors & Products
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Thu, 11 Sep 2025 17:00:00 +0000
Type | Values Removed | Values Added |
---|---|---|
Description | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Add the SM6115 MDSS compatible to clients compatible list, as it also needs that workaround. Without this workaround, for example, QRB4210 RB2 which is based on SM4250/SM6115 generates a lot of smmu unhandled context faults during boot: arm_smmu_context_fault: 116854 callbacks suppressed arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1] arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 and also failed initialisation of lontium lt9611uxc, gpu and dpu is observed: (binding MDSS components triggered by lt9611uxc have failed) ------------[ cut here ]------------ !aspace WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm] Modules linked in: ... (long list of modules) CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_gem_vma_init+0x150/0x18c [msm] lr : msm_gem_vma_init+0x150/0x18c [msm] sp : ffff80008144b280 ... Call trace: msm_gem_vma_init+0x150/0x18c [msm] (P) get_vma_locked+0xc0/0x194 [msm] msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm] msm_gem_kernel_new+0x48/0x160 [msm] msm_gpu_init+0x34c/0x53c [msm] adreno_gpu_init+0x1b0/0x2d8 [msm] a6xx_gpu_init+0x1e8/0x9e0 [msm] adreno_bind+0x2b8/0x348 [msm] component_bind_all+0x100/0x230 msm_drm_bind+0x13c/0x3d0 [msm] try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa4/0x174 component_add+0x14/0x20 dsi_dev_attach+0x20/0x34 [msm] dsi_host_attach+0x58/0x98 [msm] devm_mipi_dsi_attach+0x34/0x90 lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc] lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc] i2c_device_probe+0x148/0x2a8 really_probe+0xbc/0x2c0 __driver_probe_device+0x78/0x120 driver_probe_device+0x3c/0x154 __driver_attach+0x90/0x1a0 bus_for_each_dev+0x68/0xb8 driver_attach+0x24/0x30 bus_add_driver+0xe4/0x208 driver_register+0x68/0x124 i2c_register_driver+0x48/0xcc lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc] do_one_initcall+0x60/0x1d4 do_init_module+0x54/0x1fc load_module+0x1748/0x1c8c init_module_from_file+0x74/0xa0 __arm64_sys_finit_module+0x130/0x2f8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x2c/0x80 el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22 msm_dpu 5e01000.display-controller: failed to load adreno gpu platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19 msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22 msm_dpu 5e01000.display-controller: adev bind failed: -22 lt9611uxc 0-002b: failed to attach dsi to host lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22 | |
Title | iommu/arm-smmu-qcom: Add SM6115 MDSS compatible | |
References |
|
|

Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2025-09-11T16:52:13.954Z
Reserved: 2025-04-16T07:20:57.120Z
Link: CVE-2025-39739

No data.

Status : Received
Published: 2025-09-11T17:15:35.873
Modified: 2025-09-11T17:15:35.873
Link: CVE-2025-39739

No data.

No data.