CVE-2026-99202

scsi: libsas: Fix SMP IO deadlock during HA resume

Published Oct 28, 2026 CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Description
In the Linux kernel, the following vulnerability has been resolved:

scsi: libsas: Fix SMP IO deadlock during HA resume

smp_execute_task_sg() calls pm_runtime_get_sync() on the host before
issuing an SMP command. When that command is itself issued from the HA
resume path, the get_sync() deadlocks: it waits for the ongoing resume
(the device is RPM_RESUMING), while the resume is blocked in
sas_drain_work() waiting for that same SMP IO to complete.

The deadlock needs an expander-attached SATA disk. During
sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata()
-> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for
such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() ->
sas_phy_reset() -> sas_smp_phy_control() ->
smp_execute_task_sg()). Direct-attached SATA resets through
lldd_control_phy() and SSP devices use TMFs, so neither hits this.

Replace the get_sync()/put_sync() pair with
pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only
needs to hold off autosuspend while the SMP is in flight, and it must
not try to resume the host: a sync resume issued from the HA resume path
itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init
has already reinitialized the hardware, so the device is accessible
without one.

The usage reference is still required. Discovery work normally runs
inside an event worker's PM reference, taken at sas_notify_port_event()
notify time and held until the handler has flushed the disco
queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN
from within the revalidation worker itself, and flush_workqueue() does
not wait for work items queued during execution, so that chained
revalidation runs with no outer PM reference - without the
get_noresume(), its SMP could race autosuspend.

For the BSG path, sas_smp_handler() is the only caller which may find
the host autosuspended: expander SMP requests do not go through any SCSI
device request queue, so nothing else in that path holds the host
awake. Resume it there with pm_runtime_resume_and_get() and check the
result.

Analysis

AI-generated

Technical impact

The libsas driver in the Linux kernel contains a condition where an SMP command execution path, invoked during high‑availability resume, calls pm_runtime_get_sync() on the host. This call blocks while the host is itself resuming, causing a deadlock that halts the system. The flaw is a classic example of a synchronization deadlock (CWE-833) and does not provide any direct code‑execution or privilege‑elevation capability. The result is a local denial of service: the kernel becomes unresponsive until a reboot or manual intervention, affecting only the affected host.

Affected Systems

Any installation of the Linux kernel that uses the libsas SCSI subsystem with expander‑attached SATA disks is affected. The vulnerability exists in kernel versions that lack the committed change replacing pm_runtime_get_sync() with pm_runtime_get_noresume(). No distribution or version was explicitly listed, so any kernel built prior to that commit is at risk.

Risk and Exploitability

Based on the description, it is inferred that the vulnerability requires local or higher privilege, as it manifests during the HA resume process invoked by the system itself. The EPSS score is < 1% and the CVSS score is 4.1, indicating a low probability and low severity. The vulnerability is not listed in the CISA KEV catalog. The attack vector is therefore limited to local/system‑bound operations; remote exploitation is not possible.

Remediation

No solution or workaround provided in the CVE record.

OpenCVE Recommended Actions

  • Upgrade the kernel to a release that includes the libsas deadlock fix, which replaces pm_runtime_get_sync() with pm_runtime_get_noresume().
  • If an immediate kernel upgrade is not feasible, postpone or avoid triggering high‑availability resume operations on systems with expander‑attached SATA disks until the patch is applied, thereby preventing the deadlock condition.
  • Apply the backport patch that implements pm_runtime_get_noresume() in smp_execute_task_sg() to environments where a kernel upgrade is not possible, ensuring the host is not in an HA resume state during application of the patch.

Generated by OpenCVE AI on November 2, 2026 at 16:07 UTC.

Tracking

Sign in to view the affected projects.

Advisories

Source ID Title
Debian DLA Debian DLA DLA-4904-1 linux-6.12 security update
Debian DLA Debian DLA DLA-4906-1 linux security update
History
Type Values Removed Values Added
Weaknesses CWE-754
Type Values Removed Values Added
Weaknesses CWE-833
References
Metrics threat_severity

None

cvssV3_1

{'score': 4.1, 'vector': 'CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H'}

threat_severity

Moderate

Type Values Removed Values Added
First Time appeared Linux linux
Vendors & Products Linux linux
Type Values Removed Values Added
Weaknesses CWE-754
Type Values Removed Values Added
Description In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix SMP IO deadlock during HA resume smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result.
Title scsi: libsas: Fix SMP IO deadlock during HA resume
First Time appeared Linux
Linux linux Kernel
CPEs cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Vendors & Products Linux
Linux linux Kernel
References
Weaknesses

Sources

Status
PUBLISHED
Assigner
Linux
Published
Updated
Oct 30, 2026, 12:42 PM
Reserved
Sep 25, 2026, 10:25 AM
Status
Received
Published
Oct 28, 2026, 11:17 AM
Modified
Oct 30, 2026, 1:21 PM
Severity
Moderate
Public date
Oct 28, 2026, 10:35 AM