| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MuJS e892c9fdb contains an incorrect numeric conversion vulnerability in jsR_isindex() in jsrun.c. A specially crafted JavaScript input containing an excessively large numeric array index can cause an out-of-range floating-point value to be converted to an integer without proper range validation. This results in undefined behavior and can cause process termination, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: simpledrm: Improve stride validation
Validate the computed stride against the maximum value INT_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: properly account locked pages
secretmem accounts folios by treating memory as if it were mlock()'d and
thus limited by the RLIMIT_MEMLOCK limit.
However the folios are unevictable and remain so until the inode is
evicted, eliminating usual mlock() semantics - mapping folios then
unmapping them does not clear their unevictable state, since it depends on
AS_UNEVICTABLE, not PG_mlocked.
A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply
map then unmap and VmLck no longer counts the secretmem range. Worse,
folios are not accounted in the process's RSS, meaning the OOM killer
won't know to kill the process.
Repeatedly mapping/unmapping (or forking) can then result in the
consumption of all available system memory with unevictable folios and
cause system instability.
A secretmem fd can be passed between processes and over fork so a
per-process limit simply does not make sense, so follow the precedent set
by io_uring, perf, skbuff, iommufd and xdp by tracking the number of
locked pages in user_struct->locked_vm.
Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK
applies per-user not per-process, so it doesn't make sense to bypass for
users with CAP_IPC_LOCK, therefore remove this bypass.
There is simply no reason to carry on marking the mapping as mlock()'d
since it's misleading and the lifecycle is now correctly handled, so
remove this too.
Note that secretmem does not support any form of truncation (including
hole punching) and the folios are unreclaimable, so the folios need only
be accounted on fault and unaccounted on inode destruction.
__secretmem_account_pages() is more or less a duplicate of the code that
io_uring etc. use, but since this is a bug fix that needs backporting,
defer any de-duplication efforts to a follow-up.
test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has
been removed, so remove the test altogether for the fix. A new test will
be sent separately for upstream. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb()
qla24xx_process_response_queue() advances ring_ptr past the head IOCB
before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr
already points at the first continuation IOCB. The function however
looped purex->entry_count times starting at ring_ptr. As entry_count
includes the head, this consumed one entry too many: it stamped
RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring
past it, silently dropping a legitimate firmware response. The head
IOCB's signature was also never marked.
Mark the head processed and account for it, then consume only the
entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer(). |
| Stack-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.0577. |
| Use of Out-of-range Pointer Offset in GitHub repository vim/vim prior to 9.0.1499. |
| Out-of-bounds Read in GitHub repository vim/vim prior to 9.0.1143. |
| Heap based buffer overflow in vim/vim 9.0.0946 and below by allowing an attacker to CTRL-W gf in the expression used in the RHS of the substitute command. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0789. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0579. |
| Stack-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.0598. |
| NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__pathArcTo() when parsing SVG arc commands. A specially crafted SVG document containing extreme arc radius values can cause intermediate arc calculations to produce a NaN delta angle. The function subsequently converts this NaN value to int without validating that it is finite and representable, resulting in undefined behavior and process termination, leading to denial of service. |
| zserge jsmn commit 25647e6 is vulnerable to Buffer Overflow in example/jsondump.c dump(). |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: bypass the reclaim and oom killer for dying tasks once oom_reaper is done
At Meta, we are seeing instances where an OOM killed job is stuck in the
exit path for several hours. In one particular case, the job was stuck
for more than 8 hours and I had to manually remove the memory.max limits
to allow the process to exit.
The job was a single process job and had ~55 GiB memory.max and zswap
enabled. It had almost 0 anon in memory and ~111 GiB in zswap compressed
to ~51 GiB zswap pool (i.e. almost all of memory.current was zswap).
Nothing was left on the LRUs to reclaim.
On further inspection, I observed ~20k threads of that process stuck with
the following stack:
[<0>] mem_cgroup_out_of_memory+0x4e/0xa0
[<0>] charge_memcg+0x8bf/0x990
[<0>] mem_cgroup_swapin_charge_folio+0x4e/0x80
[<0>] __read_swap_cache_async+0x10c/0x260
[<0>] swapin_readahead+0x116/0x3f0
[<0>] do_swap_page+0x13c/0x1ce0
[<0>] handle_mm_fault+0x61d/0x11f0
[<0>] do_user_addr_fault+0x3e7/0x6d0
[<0>] exc_page_fault+0x8f/0x110
[<0>] asm_exc_page_fault+0x22/0x30
[<0>] __get_user_8+0x14/0x20
[<0>] futex_cleanup+0x27/0x1c0
[<0>] futex_exit_release+0x47/0x60
[<0>] do_exit+0x107/0x940
[<0>] do_group_exit+0x81/0xa0
[<0>] get_signal+0x2b1/0x6e0
[<0>] arch_do_signal_or_restart+0x1a/0x1c0
[<0>] exit_to_user_mode_loop+0xa8/0x1c0
[<0>] do_syscall_64+0x152/0x250
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
In addition the dmesg was filled with "Out of memory and no killable
processes..." messages.
I have no idea why oom reaper was not able to reap/unmap the process. My
guess is that since oom reaper tries to acquire mmap_lock in read mode
limited number of times and then gives up, there might be a thread of that
process which had mmap_lock in write mode at that time.
My initial suspicion was the futex_cleanup and kernel page fault causing
infinite fault and charge retries but that was put to rest in previous
discussions happened on similar problem [1].
My current theory is that it is just a simple slow serialization behind
the oom_lock. Unlike page allocator, memcg charge code takes the oom_lock
without the "try". Though memcg oom code uses mutex_lock_killable(), note
that in the call stack get_signal() consumes SIGKILL (or
sigdelset(SIGKILL)) before calling do_group_exit(). So this
mutex_lock_killable() is just a mutex_lock() here. Therefore 10s of
thousands of threads are waiting on oom_lock and one by one they get
-EFAULT from get_user() in the futex cleanup code and bails out.
Discussion from [1] led to commit a75ffa26122b ("memcg, oom: do not bypass
oom killer for dying tasks") which routes dying tasks into the OOM path
precisely so the oom_reaper can reap their mm and free the memory
asynchronously. But the reaper is best-effort and one-shot: if it cannot
take mmap_lock for read (e.g. a sibling thread holds it for write) it
sets MMF_OOM_SKIP and never retries, leaving only the glacial
oom_lock-serialized synchronous drain.
Once MMF_OOM_SKIP is set there is no more asynchronous reclaim coming for
the mm, so a dying task charging against it has nothing left to wait for:
it frees its memory only once it finishes exiting. Running reclaim and
the (no-victim) OOM killer for it is then pointless, and doing it for 10s
of thousands of exiting threads is what serializes them behind oom_lock.
So before reclaim, if current is an OOM victim whose reaper is done, fail
the charge.
Reproduced with 20k threads, each parking a robust futex head on its own
zswapped page, OOM-group-killed while a sibling holds mmap_lock for write
so the reaper gives up and sets MMF_OOM_SKIP. Tested on next-20260728 and
baseline show ~90 seconds exit time while with the patch the exit time
reduced to ~3 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: make the v1 soft limit knob inert
The v1 soft limit has been deprecated since v6.12 and nobody has reported
depending on it. Start the removal by decoupling the interface from the
implementation: keep memory.soft_limit_in_bytes, but ignore writes to it
and always report the maximum value on read similar to what
memory.kmem.limit_in_bytes already does.
Writes are still parsed, so malformed input keeps returning -EINVAL. The
knob now also behaves the same everywhere: it used to return -EOPNOTSUPP
on PREEMPT_RT, where soft limit reclaim has always been disabled.
This also fixes the syzbot report linked below. Soft limit reclaim is the
only caller that runs shrink_lruvec() from kswapd against a specific
memcg, so it is the only way to reach lru_gen_shrink_lruvec() and in turn
set_mm_walk(), which warns when called from kswapd. |
| Applications built on MongoDB Entity Framework Core Provider which combine independent encryption settings and this provider's encryption settings may silently lose TLS and schema-map settings leading to protected fields being stored unencrypted in the database. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Fix the lockless page-table walk in show_pte()
show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.
Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().
For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.
Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value. |
| If logging mode is set to DEBUG or a malformed MongoDB connection string is used, application logs may collect sensitive information (if in use) such as passwords and AWS secure access keys. |
| Applications built on MongoDB Entity Framework Core Provider which place a database name in the connection string may inadvertently disable field level encryption. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
The DECLARE_BITMAP(apm_filtered, AP_DEVICES) macro allocates the bitmap
on the stack without zero-initializing it.
In vfio_ap_mdev_hot_plug_cfg(), the vfio_ap_mdev_filter_matrix() function
is only called to initialize and populate apm_filtered if either
filter_adapters or filter_domains is true. If the hot plug configuration
change only adds control domains (meaning filter_cdoms is true, but
filter_adapters and filter_domains are both false),
vfio_ap_mdev_filter_matrix() is bypassed.
Consequently, apm_filtered is passed to reset_queues_for_apids() with
uninitialized stack garbage. This can cause reset_queues_for_apids() to
interpret arbitrary stack garbage bits as valid APIDs to reset, potentially
performing unintended guest hardware queue resets.
Fix this by zero-initializing the apm_filtered bitmap at the beginning of
vfio_ap_mdev_hot_plug_cfg() using bitmap_zero(). |
