| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds write vulnerability was found in GStreamer's H.266/VVC PPS picture partition parser in gst-plugins-bad. In the multi-slice-in-tile processing of gst_h266_parser_parse_picture_partition() (gsth266parser.c), the loop iterates without checking that the slice index stays within bounds, writing past three fixed-size arrays (slice_height_in_ctus, slice_top_left_ctu_x, slice_top_left_ctu_y) in the GstH266PPS structure. While the initial proof-of-concept demonstrated a 4-byte out-of-bounds write, the code permits larger writes across multiple iterations. A crafted H.266/VVC media file can trigger this vulnerability. |
| An integer overflow flaw was found in the SASL I/O layer of 389 Directory Server (389-ds-base). In sasl_io_start_packet(), adding sizeof(uint32_t) to a crafted SASL packet length prefix of 0xFFFFFFFC causes unsigned wraparound to zero, bypassing the nsslapd-maxsasliosize limit and leading to a heap buffer overflow of up to approximately 2 megabytes of attacker-controlled data. After a successful SASL bind with integrity protection (SSF > 0), a remote attacker can cause a Denial of Service (DoS) or achieve Remote Code Execution (RCE). In FreeIPA and Red Hat Identity Management deployments, any domain user with a valid Kerberos ticket, enrolled host, or service account can trigger this vulnerability over the network. This flaw is independent of CVE-2025-14905, which patched schema.c only and did not modify sasl_io.c. |
| A stack buffer overflow flaw was found in the GStreamer H.265 codec parser library (gst-plugins-bad). When parsing a buffering period SEI message, the parser uses an incorrect loop bound derived from cpb_cnt_minus1[i] (the loop index) instead of the sub-layer 0 CPB count cpb_cnt_minus1[0] from the referenced Sequence Parameter Set. A crafted H.265 video file or stream can cause the parser to write beyond the bounds of stack-allocated CPB delay arrays, resulting in a crash or potential stack memory corruption. |
| A flaw was found in the admin-ui-ext component of Keycloak, which provides extended administrative user interface capabilities. The issue occurs because certain bulk role-removal endpoints fail to perform granular permission checks when deleting role mappings. This allows a delegated administrator with limited permissions to remove highly privileged roles from other users or groups, potentially disrupting administrative access control. |
| A use-after-free flaw was found in the X.Org X server and Xwayland in CreateSaverWindow(). A client can trigger a use-after-free read after changing window attributes and forcing the screen saver, leading to information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix off-by-one error in do_split
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| A use-after-free flaw was found in the X.Org X server and Xwayland in FreeCounter(). A client that sets up multiple SyncCounters and awaits on those triggers can trigger a use-after-free when destroying those counters via a second client connection. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| An integer underflow vulnerability was found in MIT krb5 in the berval2tl_data() function in plugins/kdb/ldap/libkdb_ldap/ldap_principal2.c. The function performs an unsigned subtraction (bv_len - 2) without a prior bounds check. When bv_len is 0 or 1, the subtraction wraps to a large value which is then truncated to uint16_t, yielding 0xFFFE (65534) or 0xFFFF (65535). The subsequent malloc succeeds and memcpy reads up to 65534 bytes from a 0-1 byte buffer, resulting in a heap out-of-bounds read.
The attack vector involves a malicious or compromised LDAP KDB backend returning a krbExtraData attribute with bv_len < 2, triggering the underflow when the KDC or kadmind reads principal data. |
| The Route OpenShift resource allows to define routes to make pods reachable at a subdomain through HAProxy. It was found that the checks performed on the spec.path YAML stanza in a Route document was insufficient and could allow a controlled injection of the HAProxy configuration. |
| A heap buffer overflow flaw was found in 389 Directory Server. When serializing objectclass definitions, the oc_superior (SUP) field length is omitted from buffer size calculations in read_schema_dse() and schema_oc_to_string(), but the field is still written via strcat(). An attacker with Directory Manager privileges, or a compromised replication supplier, can trigger a server crash by creating objectclasses with long SUP values. This is an incomplete fix variant of CVE-2025-14905. |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior. |
| A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation. |
| A flaw was found in Keycloak. An authenticated attacker can perform Server-Side Request Forgery (SSRF) by manipulating the `client_session_host` parameter during refresh token requests. This occurs when a Keycloak client is configured to use the `backchannel.logout.url` with the `application.session.host` placeholder. Successful exploitation allows the attacker to make HTTP requests from the Keycloak server’s network context, potentially probing internal networks or internal APIs, leading to information disclosure. |
| A flaw was found in Keycloak. A remote attacker can exploit a Cross-Origin Resource Sharing (CORS) header injection vulnerability in Keycloak's User-Managed Access (UMA) token endpoint. This flaw occurs because the `azp` claim from a client-supplied JSON Web Token (JWT) is used to set the `Access-Control-Allow-Origin` header before the JWT signature is validated. When a specially crafted JWT with an attacker-controlled `azp` value is processed, this value is reflected as the CORS origin, even if the grant is later rejected. This can lead to the exposure of low-sensitivity information from authorization server error responses, weakening origin isolation, but only when a target client is misconfigured with `webOrigins: ["*"]`. |
| A flaw was found in org.keycloak.services. An administrator with delegated access to read group memberships and users can bypass user profile permissions by accessing the group members endpoint. This allows the administrator to view user attributes that are explicitly configured to be denied, leading to information disclosure. |
| A flaw was found in Keycloak. When both realm-level and client-level `notBefore` revocation policies are configured, Keycloak's OpenID Connect (OIDC) Introspection feature fails to properly honor the realm-level policy. This allows tokens that should have been revoked to remain active, potentially leading to unauthorized access or continued session validity. This could impact the security of systems utilizing Keycloak for identity and access management. |
| A flaw was found in Keycloak. An authenticated user can bypass configured WebAuthn policies during credential registration by manipulating client-side JavaScript. This occurs because the server-side processAction() fails to validate that the newly created credential's parameters, such as public key algorithms, match the realm's configured WebAuthn policies. This could lead to the creation of credentials that do not adhere to administrative security requirements, potentially weakening the overall security posture of the system by allowing non-compliant authentication methods. |
| When Keycloak is started with `--features-disabled=account,account-api`, the Account REST API is only partially disabled. Five endpoints under the versioned path `/account/v1alpha1` remain fully functional — including both read and write operations — because they lack the `checkAccountApiEnabled()` gate that correctly blocks four other endpoints in the same REST service class. The user needs to have permissions to use the API. |
| A flaw was found in Keycloak's ClientRegistrationAuth component. A remote unauthenticated attacker can exploit this vulnerability by sending a specially crafted POST request with a malformed 'Authorization: Bearer' header to any client registration endpoint. This can lead to an ArrayIndexOutOfBoundsException, causing the server to return an HTTP 500 error and resulting in a Denial of Service (DoS) for the affected service. |
| A flaw was found in Keycloak. When revokeRefreshToken=true is enabled and persistent session storage is in use, a server restart can reset internal timing mechanisms. This allows a remote attacker, who has previously captured a user's refresh token, to replay that token even after it has been revoked. Successful exploitation grants the attacker unauthorized access to the victim's account, potentially leading to information disclosure or privilege escalation. |
