| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: prevent kernel-usb-infoleak
The syzbot reported a kernel-usb-infoleak in usbtmc_write,
we need to clear the structure before filling fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: add bounds checking to ocfs2_xattr_find_entry()
Add a paranoia check to make sure it doesn't stray beyond valid memory
region containing ocfs2 xattr entries when scanning for a match. It will
prevent out-of-bound access in case of crafted images. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been identified in `gst_gdk_pixbuf_dec_flush` within `gstgdkpixbufdec.c`. This function invokes `memcpy`, using `out_pix` as the destination address. `out_pix` is expected to point to the frame 0 from the frame structure, which is read from the input file. However, in certain situations, it can points to a NULL frame, causing the subsequent call to `memcpy` to attempt writing to the null address (0x00), leading to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in the function qtdemux_parse_theora_extension within qtdemux.c. The vulnerability occurs due to an underflow of the gint size variable, which causes size to hold a large unintended value when cast to an unsigned integer. This 32-bit negative value is then cast to a 64-bit unsigned integer (0xfffffffffffffffa) in a subsequent call to gst_buffer_new_and_alloc. The function gst_buffer_new_allocate then attempts to allocate memory, eventually calling _sysmem_new_block. The function _sysmem_new_block adds alignment and header size to the (unsigned) size, causing the overflow of the 'slice_size' variable. As a result, only 0x89 bytes are allocated, despite the large input size. When the following memcpy call occurs in gst_buffer_fill, the data from the input file will overwrite the content of the GstMapInfo info structure. Finally, during the call to gst_memory_unmap, the overwritten memory may cause a function pointer hijack, as the mem->allocator->mem_unmap_full function is called with a corrupted pointer. This function pointer overwrite could allow an attacker to alter the execution flow of the program, leading to arbitrary code execution. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_update_tracks function within matroska-demux.c. The vulnerability occurs when the gst_caps_is_equal function is called with invalid caps values. If this happen, then in the function gst_buffer_get_size the call to GST_BUFFER_MEM_PTR can return a null pointer. Attempting to dereference the size field of this null pointer results in a null pointer dereference. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_parse_blockgroup_or_simpleblock function within matroska-demux.c. This function does not properly check the validity of the GstBuffer *sub pointer before performing dereferences. As a result, null pointer dereferences may occur. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_jpeg_dec_negotiate function in gstjpegdec.c. This function does not check for a NULL return value from gst_video_decoder_set_output_state. When this happens, dereferences of the outstate pointer will lead to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in the qtdemux_merge_sample_table function within qtdemux.c. The problem is that the size of the stts buffer isn’t properly checked before reading stts_duration, allowing the program to read 4 bytes beyond the boundaries of stts->data. This vulnerability reads up to 4 bytes past the allocated bounds of the stts array. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been detected in the function qtdemux_parse_samples within qtdemux.c. This issue arises when the function qtdemux_parse_samples reads data beyond the boundaries of the stream->stco buffer. The following code snippet shows the call to qt_atom_parser_get_offset_unchecked, which leads to the OOB-read when parsing the provided GHSL-2024-245_crash1.mp4 file. This issue may lead to read up to 8 bytes out-of-bounds. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in the qtdemux_parse_svq3_stsd_data function within qtdemux.c. In the FOURCC_SMI_ case, seqh_size is read from the input file without proper validation. If seqh_size is greater than the remaining size of the data buffer, it can lead to an OOB-read in the following call to gst_buffer_fill, which internally uses memcpy. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in extract_cc_from_data function within qtdemux.c. In the FOURCC_c708 case, the subtraction atom_length - 8 may result in an underflow if atom_length is less than 8. When that subtraction underflows, *cclen ends up being a large number, and then cclen is passed to g_memdup2 leading to an out-of-bounds (OOB) read. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in qtdemux_parse_trak function within qtdemux.c. During the strf parsing case, the subtraction size -= 40 can lead to a negative integer overflow if it is less than 40. If this happens, the subsequent call to gst_buffer_fill will invoke memcpy with a large tocopy size, resulting in an OOB-read. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. The function qtdemux_parse_sbgp in qtdemux.c is affected by a null dereference vulnerability. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in qtdemux_parse_container function within qtdemux.c. In the parent function qtdemux_parse_node, the value of length is not well checked. So, if length is big enough, it causes the pointer end to point beyond the boundaries of buffer. Subsequently, in the qtdemux_parse_container function, the while loop can trigger an OOB-read, accessing memory beyond the bounds of buf. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An uninitialized stack variable vulnerability has been identified in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. When size < 4, the program calls gst_buffer_unmap with an uninitialized map variable. Then, in the gst_memory_unmap function, the program will attempt to unmap the buffer using the uninitialized map variable, causing a function pointer hijack, as it will jump to mem->allocator->mem_unmap_full or mem->allocator->mem_unmap. This vulnerability could allow an attacker to hijack the execution flow, potentially leading to code execution. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An out-of-bounds write vulnerability was identified in the convert_to_s334_1a function in isomp4/qtdemux.c. The vulnerability arises due to a discrepancy between the size of memory allocated to the storage array and the loop condition i * 2 < ccpair_size. Specifically, when ccpair_size is even, the allocated size in storage does not match the loop's expected bounds, resulting in an out-of-bounds write. This bug allows for the overwriting of up to 3 bytes beyond the allocated bounds of the storage array. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. The program attempts to reallocate the memory pointed to by stream->samples to accommodate stream->n_samples + samples_count elements of type QtDemuxSample. The problem is that samples_count is read from the input file. And if this value is big enough, this can lead to an integer overflow during the addition. As a consequence, g_try_renew might allocate memory for a significantly smaller number of elements than intended. Following this, the program iterates through samples_count elements and attempts to write samples_count number of elements, potentially exceeding the actual allocated memory size and causing an OOB-write. This vulnerability is fixed in 1.24.10. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check smcd_v2_ext_offset when receiving proposal msg
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-debug: fix a possible deadlock on radix_lock
radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock
otherwise, there's a possible deadlock scenario when
dma debug API is called holding rq_lock():
CPU0 CPU1 CPU2
dma_free_attrs()
check_unmap() add_dma_entry() __schedule() //out
(A) rq_lock()
get_hash_bucket()
(A) dma_entry_hash
check_sync()
(A) radix_lock() (W) dma_entry_hash
dma_entry_free()
(W) radix_lock()
// CPU2's one
(W) rq_lock()
CPU1 situation can happen when it extending radix tree and
it tries to wake up kswapd via wake_all_kswapd().
CPU2 situation can happen while perf_event_task_sched_out()
(i.e. dma sync operation is called while deleting perf_event using
etm and etr tmc which are Arm Coresight hwtracing driver backends).
To remove this possible situation, call dma_entry_free() after
put_hash_bucket() in check_unmap(). |
