| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This Medium severity ACE (Arbitrary Code Execution) vulnerability was introduced in version 4.2.8 of Sourcetree for Mac.
This ACE (Arbitrary Code Execution) vulnerability, with a CVSS Score of 5.9, allows a locally authenticated attacker to execute arbitrary code which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires user interaction.
Atlassian recommends that Sourcetree for Mac users upgrade to the latest version. If you are unable to do so, upgrade your instance to one of the specified supported fixed versions. See the release notes https://www.sourcetreeapp.com/download-archives .
You can download the latest version of Sourcetree for Mac from the download center https://www.sourcetreeapp.com/download-archives .
This vulnerability was found through the Atlassian Bug Bounty Program by Karol Mazurek (AFINE). |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, low-privileged, local attacker to access WLAN configuration details including passwords.
This vulnerability is due to improper privilege checks. An attacker could exploit this vulnerability by using the show and show tech wireless CLI commands to access configuration details, including passwords. A successful exploit could allow the attacker to access configuration details that they are not authorized to access. |
| A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap overflow, resulting in an affected device reloading.
This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic. |
| A timing attack vulnerability exists in the gradio-app/gradio repository, specifically within the login function in routes.py. The vulnerability arises from the use of a direct comparison operation (`app.auth[username] == password`) to validate user credentials, which can be exploited to guess passwords based on response times. Successful exploitation of this vulnerability could allow an attacker to bypass authentication mechanisms and gain unauthorized access. |
| A use-after-free flaw was found in xorg-x11-server-Xvfb. This issue occurs in Xvfb with a very specific and legacy configuration (a multi-screen setup with multiple protocol screens, also known as Zaphod mode). If the pointer is warped from a screen 1 to a screen 0, a use-after-free issue may be triggered during shutdown or reset of the Xvfb server, allowing for possible escalation of privileges or denial of service. |
| Versions of the package z-push/z-push-dev before 2.7.6 are vulnerable to SQL Injection due to unparameterized queries in the IMAP backend. An attacker can inject malicious commands by manipulating the username field in basic authentication. This allows the attacker to access and potentially modify or delete sensitive data from a linked third-party database.
**Note:** This vulnerability affects Z-Push installations that utilize the IMAP backend and have the IMAP_FROM_SQL_QUERY option configured.
Mitigation
Change configuration to use the default or LDAP in backend/imap/config.php
php
define('IMAP_DEFAULTFROM', '');
or
php
define('IMAP_DEFAULTFROM', 'ldap'); |
| The Bonanza – WooCommerce Free Gifts Lite plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the xlo_optin_call() function in all versions up to, and including, 1.0.0. This makes it possible for authenticated attackers, with Subscriber-level access and above, to set the opt in status to success. |
| The YouTube Embed plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘instance’ parameter in all versions up to, and including, 10.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Magical Addons For Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Custom Attributes in all versions up to, and including, 1.3.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Sky Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Multiple widgets in all versions up to, and including, 3.1.4 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| "SwitchBot" App for iOS/Android contains an insertion of sensitive information into log file vulnerability in versions V6.24 through V9.12. If this vulnerability is exploited, sensitive user information may be exposed to an attacker who has access to the application logs. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in DECE Software Geodi allows Cross-Site Scripting (XSS).This issue affects Geodi: before GEODI Setup 9.0.146. |
| In HDP Server versions below 4.6.2.2978 on Linux, unauthorized access could occur via IP spoofing using the X-Forwarded-For header.
Since XFF is a client-controlled header, it could be spoofed, allowing unauthorized access if the spoofed IP matched a whitelisted range.
This vulnerability could be exploited to bypass IP restrictions, though valid user credentials would still be required for resource access. |
| Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in DECE Software Geodi allows HTTP Request Splitting.This issue affects Geodi: before GEODI Setup 9.0.146. |
| Unauthorized access and impersonation can occur in versions 4.6.2.3226 and below of Progress Software's Hybrid Data Pipeline Server on Linux. This vulnerability allows attackers to combine credentials from different sources, potentially leading to client impersonation and unauthorized access.
When OAuth Clients perform an OAuth handshake with the Hybrid Data Pipeline Server, the server accepts client credentials from both HTTP headers and request parameters. |
| The Hydra Booking plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the tfhb_reset_password_callback() function in versions 1.1.0 to 1.1.18. This makes it possible for authenticated attackers, with Subscriber-level access and above, to reset the password of an Administrator user, achieving full privilege escalation. |
| VMware vCenter contains a denial-of-service vulnerability. A malicious actor who is authenticated through vCenter and has permission to perform API calls for guest OS customisation may trigger this vulnerability to create a denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
huge_pmd_unshare() drops a reference on a page table that may have
previously been shared across processes, potentially turning it into a
normal page table used in another process in which unrelated VMAs can
afterwards be installed.
If this happens in the middle of a concurrent gup_fast(), gup_fast() could
end up walking the page tables of another process. While I don't see any
way in which that immediately leads to kernel memory corruption, it is
really weird and unexpected.
Fix it with an explicit broadcast IPI through tlb_remove_table_sync_one(),
just like we do in khugepaged when removing page tables for a THP
collapse. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: unshare page tables during VMA split, not before
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2] |
| Unrestricted Upload of File with Dangerous Type vulnerability in Ovatheme Ovatheme Events Manager allows Using Malicious Files.This issue affects Ovatheme Events Manager: from n/a through 1.8.4. |
