| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uninitialized Use in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Uninitialized Use in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c. |
| Out of bounds write in V8 in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in DOM in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Integer overflow in Skia in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in Passwords in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: High) |
| Use after free in PDFium in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to potentially exploit heap corruption via a crafted PDF file. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok. |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: Limit the minimal number of bucket to two
There is an OOB read problem on dentry_hashtable when user sets
'dhash_entries=1':
BUG: unable to handle page fault for address: ffff888b30b774b0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP PTI
RIP: 0010:__d_lookup+0x56/0x120
Call Trace:
d_lookup.cold+0x16/0x5d
lookup_dcache+0x27/0xf0
lookup_one_qstr_excl+0x2a/0x180
start_dirop+0x55/0xa0
simple_start_creating+0x8d/0xa0
debugfs_start_creating+0x8c/0x180
debugfs_create_dir+0x1d/0x1c0
pinctrl_init+0x6d/0x140
do_one_initcall+0x6d/0x3d0
kernel_init_freeable+0x39f/0x460
kernel_init+0x2a/0x260
There will be only one bucket in dentry_hashtable when dhash_entries is
set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,
following process will access more than one buckets(which memory region
is not allocated) in dentry_hashtable:
d_lookup
b = d_hash(hash)
dentry_hashtable + ((u32)hashlen >> d_hash_shift)
// The C standard defines the behavior of right shift amounts
// exceeding the bit width of the operand as undefined. The
// result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen',
// so 'b' will point to an unallocated memory region.
hlist_bl_for_each_entry_rcu(b)
hlist_bl_first_rcu(head)
h->first // read OOB!
Fix it by limiting the minimal number of dentry_hashtable bucket to two,
so that 'd_hash_shift' won't exceeds the bit width of type u32. |
| Out of bounds memory access in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0. |
| Use after free in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in PerformanceManager in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
