| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: lpc32xx: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in lpc32xx_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
lpc32xx_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix PM reference leak in buffer preenable
ads1119_triggered_buffer_preenable() resumes the device with
pm_runtime_resume_and_get() before starting a conversion.
If i2c_smbus_write_byte() fails, the function returns the error directly
and leaves the runtime PM usage counter elevated. The matching
postdisable callback is not called when preenable fails, so the reference
is leaked and the device may remain runtime-active indefinitely.
Store the I2C transfer result in ret and drop the runtime PM reference on
failure before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry
matching the bw_bits value read from the chip:
for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
if (bmg160_samp_freq_table[i].bw_bits == bw_bits)
break;
}
*val = bmg160_samp_freq_table[i].filter;
If no entry matches, i ends up equal to the array size and the next line
reads one slot past the end. bmg160_set_filter() has the same shape, driven
by 'val' instead of bw_bits.
smatch flags both:
drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
Return -EINVAL when no entry matches.
The set_filter() path is reachable from userspace via the sysfs
in_anglvel_filter_low_pass_3db_frequency interface, so userspace can
trivially trigger the out-of-bounds read with a value that is not in
bmg160_samp_freq_table[].filter. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: Validate control metadata from the device
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aoa: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails. In
layout.c, the function does not check the return value before
dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can
lead to a NULL pointer dereference.
Add NULL checks after snd_ctl_new1() calls and return early if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: cmipci: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_cmipci_spdif_controls() does not check the return value before
dereferencing kctl->id.device, which can lead to a NULL pointer
dereference.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: compress: Fix task creation error unwind
snd_compr_task_new() allocates the driver task before validating the
returned DMA buffers and reserving file descriptors. When either of
those later steps fails, the core frees its task wrapper and DMA-buffer
references without calling the driver's task_free() callback. Any
driver resources allocated by task_create() are therefore leaked.
The dual-fd allocation path also jumps to cleanup without storing the
negative get_unused_fd_flags() result in retval. Since retval still
contains the successful task_create() return value, TASK_CREATE can
incorrectly report success although the task was discarded.
Preserve the fd allocation errors and call task_free() when failure
occurs after a successful task_create() callback. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire: isight: bound the sample count to the packet payload
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: gus: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_gf1_pcm_volume_control() does not check the return value before
dereferencing kctl->id.index, which can lead to a NULL pointer
dereference.
Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
The architecture updates the cpu_mask in a domain's header to track which
online CPUs are associated with the domain. When this mask becomes empty
the architecture initiates offline of the domain that includes calling
on resctrl fs to offline the domain. If it is a monitoring domain in
which LLC occupancy is tracked resctrl fs forces the limbo handler to
clear all busy RMID state associated with the domain.
The limbo handler always reads the current event value associated with a
busy RMID irrespective of it being checked as part of regular "is it still
busy" check or whether it will be forced released anyway. When reading an
RMID on a system with SNC enabled the "logical RMID" is converted to the
"physical RMID" and this conversion requires the NUMA node ID of the
resctrl monitoring domain that is in turn determined by querying the NUMA
node ID of any CPU belonging to the monitoring domain.
When the monitoring domain is going offline its cpu_mask is empty causing
the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as
argument resulting in an out-of-bounds access.
Refactor the limbo handler to skip reading the RMID when the RMID will
just be forced to no longer be dirty in the domain anyway. Add a safety
check to the architecture's RMID reader to protect against this scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Latch disable_idle_d3 per device
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Release the VGA arbiter client on register_device() failure
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Remove device debugfs before releasing devres
VFIO device debugfs files created with debugfs_create_devm_seqfile()
store a devres allocated debugfs_devm_entry as inode private data.
vfio_unregister_group_dev() currently calls vfio_device_del() before
vfio_device_debugfs_exit(), but device_del() releases devres. This can
leave debugfs entries visible with stale inode private data while
unregister waits for userspace references to drain.
Remove the per-device debugfs tree before vfio_device_del(). The debugfs
view is diagnostic only, so losing it at the start of unregister is
preferable to preserving entries whose backing storage may already have
been released.
Complete the teardown by clearing the per-device debugfs root after
removal. This matches the global debugfs root cleanup and prevents
future users from mistaking a removed dentry for a live debugfs tree
during the remainder of unregister. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/mlx5: Fix racy bitfields and tighten struct layout
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note mlx5_vhca_page_tracker.status is relocated to fill the alignment
hole this split exposes.
Bitfield justifications:
migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe
chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe
mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe
Dedicated storage units:
mdev_detach: written in the VF attach/detach event notifier
mlx5fv_vf_event() at runtime
log_active: written in mlx5vf_start_page_tracker()/
mlx5vf_stop_page_tracker() during runtime dirty tracking
deferred_reset: written in mlx5vf_state_mutex_unlock()/
mlx5vf_pci_aer_reset_done() during runtime reset handling
is_err: set by tracker error handling and dirty-log polling at runtime
object_changed: set by tracker event handling and cleared by dirty-log
polling at runtime |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on registration failure
Make sure to release the sibling interfaces in case controller
registration fails to avoid use-after-free and double-free when they are
eventually disconnected.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on marvell probe failure
Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
