| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix the SCO setup context lifetime
hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so
the context is only freed if hci_enhanced_setup_sync() actually runs. An
entry that is cancelled instead is leaked, as
_hci_cmd_sync_cancel_entry() does not release entry->data when there is
no destroy callback, and hci_cmd_sync_clear() cancels every pending entry
when the controller is unregistered.
The context also stores a bare hci_conn pointer, so the connection can be
freed while the work is queued. The dequeue in hci_conn_del() does not
cover it either, as it matches on entry->data == conn and entry->data is
the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth:
hci_sync: hold conn in hci_connect_acl/le_sync() callbacks").
Hold the connection and release both from a destroy callback. The
submission failure path drops both, since hci_cmd_sync_submit() does not
call the destroy callback when it fails to queue. |
| The Asset CleanUp: Page Speed Booster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content in all versions up to, and including, 1.4.0.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is only exploitable on instances where combine_loaded_css has been enabled. |
| The The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 1.57.2. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: serialize resident iomap reads with mrec_lock
ntfs_read_iomap_begin_resident() walks the MFT record through
ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock,
while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and
ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer
under that lock. map_mft_record() only takes a reference and does not
serialize, so the reader can observe torn attribute length and offset
fields while a writer is relocating the records.
KCSAN reports the race between the mmap read fault path and both link()
and unlink():
BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize
write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1:
ntfs_attr_record_resize+0xd2/0x130
ntfs_attr_record_rm+0xad/0x530
ntfs_delete+0x224/0x640
ntfs_unlink+0x14d/0x280
vfs_unlink+0x157/0x520
read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0:
ntfs_attr_find+0x104/0x5b0
ntfs_attr_lookup+0x39c/0x10c0
ntfs_read_iomap_begin_resident+0xc6/0x230
ntfs_read_iomap_begin+0x5d/0xa0
iomap_iter+0x2e2/0x6e0
iomap_read_folio+0x147/0x2a0
ntfs_read_folio+0x108/0x170
filemap_read_folio+0x35/0x100
filemap_fault+0x993/0x1000
value changed: 0x00000250 -> 0x000001f0
The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change
is the 96 bytes of one $FILE_NAME attribute being removed.
Keep base_ni->mrec_lock from the resident read iomap lookup through
iomap_end(). This protects both the attribute walk and the subsequent copy
from iomap->inline_data, which points into the MFT record. The non-resident
path is left alone: ntfs_lookup() already holds the directory inode's
mrec_lock when it reads an index folio through read_mapping_folio(), and
taking the lock in the shared wrapper deadlocks there with recursive locking
on mrec_lock. The comment above the read_mapping_folio() call in
fs/ntfs/dir.c notes the same hazard.
The seek path uses the same lookup helper but does not dereference
iomap->inline_data. Release the lock before returning from that path,
whereas the regular read path records base_ni in iomap->private and releases
the lock from its iomap_end() callback.
Tested with a reproducer that faults in a 16-byte resident file while
another thread runs link()/unlink() on it. Before: 40 KCSAN reports in
about one second. After: no reports in 180 seconds over 206,090 read
iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no
lockdep splat with the same reproducer running for 60 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject unprivileged writes to reserved $LX* xattrs
Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names
from userspace unless the caller has CAP_SYS_ADMIN. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib()
ntfs_ir_to_ib copies all entries from index_root into a freshly allocated
index_block_size-byte buffer without verifying that the entries fit in the
available space. The entries in index_root may be larger than the usable
entry space in the index block.
This can cause OOB writes past the end of the allocation.
The validator ntfs_index_root_inconsistent() checks that entries are
self-consistent within the IR value, but never cross-checks them against
index_block_size. There is no bounds check in ntfs_ir_to_ib() before the
memcpy.
Fixing this at the sink in ntfs_ir_to_ib() since
ntfs_index_root_inconsistent() validates the logical consistency of
index_root as a structure and a root with large entries is a structurally
valid root. The bug is a size conflict of ntfs_ir_to_ib().
Also, the validator is called once per inode load in
ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a
reparent, a check there adds no overhead to the common path.
Moreover, even a future call path that bypasses the validator would still
be protected.
With NULL as first parameter of ntfs_error(), the volume error flag is
never set by this call, so the device name will be absent from the error
message. In any case, that the caller, ntfs_ir_reparent(), prints an error
message that includes the device name on NULL returns.
I think this is the best solution available without adding
'struct super_block *sb' as a parameter to ntfs_ir_to_ib().
This heap out-of-bounds write is triggered by a crafted filesystem image,
which is not in the kernel threat model, anyway, fixing memory errors would
be nice to keep things secure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix integer overflow in ftp helper port/address parsing
ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16
(hport) and into unsigned char (p[]) without checking for overflow.
A crafted FTP PASV/EPSV response with an over-long port or address
octet wraps the value, so the helper configures the data connection
with a truncated port/address.
The netfilter conntrack FTP helper had the same defect, fixed in
commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16
overflows"). Apply the equivalent fix here: widen the port accumulator
to u32 and reject values above 65535, and reject address octets above
255. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()
When nfs4_add_lease() races with a delegation return, it calls
nfs4_delete_lease() to clean up. Previously, it passed priv,
which can legitimately be NULL. Passing a NULL priv eventually
leads to a NULL pointer dereference in generic_setlease(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers
flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume
the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client
has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so
I/O to a v4.0 flexfiles DS oopses:
- nfs4_init_ds_session() dereferences clp->cl_session->session_state
while seeding the DS lease. It also only seeds cl_lease_time when
NFS4_SESSION_INITING is set; without a session that never happens, so
cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing
every 5 seconds. Seed the lease whenever there is no session and
return before touching session state.
- ff_layout_async_handle_error_v4() dereferences
clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the
v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: remove callback IDR entry on client allocation failure
nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it
finishes setting up the client. If any later initialization step fails,
the error path frees the nfs_client directly with nfs_free_client(). That
bypasses nfs_put_client(), which is where the callback IDR entry is
removed during normal teardown.
A failed allocation can therefore leave cb_ident_idr pointing at a freed
nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the
stale pointer and take a reference to it.
Make the callback IDR removal helper callable by the allocation failure
path, and remove the callback identifier before freeing the client.
This was found by a local static-analysis checker for publish-before-free
lifetime bugs and confirmed by manual inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.0.8. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to permanently delete arbitrary WordPress posts — including pages, courses, quizzes, and WooCommerce products — via wp_delete_post( $id, true ). The exploit chain requires the attacker to first trigger the profile-photo upload flow to obtain an authored wp_posts attachment row, then create a Tutor topic reparented to that attachment, before invoking the lesson deletion handler against any target post ID. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'search' parameter in all versions up to, and including, 4.0.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The UsersWP WordPress plugin before 1.5.10 does not verify that a social login provider has confirmed ownership of an email address before using it to resolve an existing account, allowing unauthenticated attackers to log in as any user, including administrators, whose email address they can assert through a provider account of their own. |
| The Easy Appointments plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.12.27 via the handle_customers_ajax. This makes it possible for authenticated attackers, with contributor-level access and above, to extract the full customer dataset from the ea_customers table, including personally identifiable information such as names, email addresses, mobile numbers, dates of birth, and physical addresses. |
| The MC4WP: Mailchimp for WordPress plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'data' Dynamic Content Tag in all versions up to, and including, 4.14.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
block: mtip32xx: synchronize ioctls with device removal
The ioctl handlers only test REMOVE_PENDING before entering
mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free
dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already
open block device can reach the handlers while del_gendisk() is in
progress.
Serialize both native and compat ioctls with removal. Set REMOVE_PENDING
before taking the mutex so new callers fail after an in-flight ioctl has
drained, and hold the mutex until the port has been torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: reject per-device queue resize for shared tag set
When shared_tags is enabled, null_setup_tagset() makes the device use the
global tag_set, whose driver_data stays NULL. null_map_queues() therefore
falls back to the module-wide g_submit_queues/g_poll_queues instead of any
per-device value.
Resizing submit_queues or poll_queues via configfs on such a device calls
blk_mq_update_nr_hw_queues() on the shared set, shrinking
set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the
q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the
now-excess hctx slots. null_map_queues(), however, keeps mapping CPUs with
the unchanged g_submit_queues/g_poll_queues, so mq_map[] ends up pointing
at those NULLed hctx slots. blk_mq_map_swqueue() then dereferences the NULL
hctx (hctx->cpumask), crashing the kernel:
[ 460.218374] KASAN: null-ptr-deref in range [0x0000000000000098-0x000000000000009f]
[ 460.219003] CPU: 24 UID: 0 PID: 1492 Comm: sh Not tainted 7.2.0-rc2+ #67 PREEMPT(full)
[ 460.219792] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
[ 460.220452] RIP: 0010:blk_mq_map_swqueue+0x4db/0x1430
......
[ 460.228977] Call Trace:
[ 460.229175] <TASK>
[ 460.229354] blk_mq_update_nr_hw_queues+0xd49/0x11c0
[ 460.229779] ? __pfx_blk_mq_update_nr_hw_queues+0x10/0x10
[ 460.230200] nullb_update_nr_hw_queues+0x1a9/0x370 [null_blk]
[ 460.230694] nullb_device_submit_queues_store+0xd9/0x170 [null_blk]
[ 460.231190] ? __pfx_nullb_device_submit_queues_store+0x10/0x10 [null_blk]
[ 460.231776] ? configfs_write_iter+0x35c/0x4e0
[ 460.232122] configfs_write_iter+0x286/0x4e0
[ 460.232460] vfs_write+0x52d/0xd00
[ 460.232779] ? __x64_sys_openat+0x108/0x1d0
[ 460.233106] ? __pfx_vfs_write+0x10/0x10
[ 460.233413] ? fdget_pos+0x1cf/0x4c0
[ 460.233745] ? fput_close+0x133/0x190
[ 460.234038] ? __pfx_expand_files+0x10/0x10
[ 460.234368] ksys_write+0xfc/0x1d0
Reproducer:
modprobe null_blk shared_tags=1 submit_queues=64 poll_queues=1
mkdir /sys/kernel/config/nullb/dev
echo 1 > /sys/kernel/config/nullb/dev/power
echo 1 > /sys/kernel/config/nullb/dev/submit_queues
A per-device resize of a shared tag set is meaningless anyway, so reject it
with -EINVAL in nullb_update_nr_hw_queues() when the device is bound to the
global tag_set. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no longer necessary
because every caller already invokes null_del_dev() first: via
nullb_group_drop_item() before nullb_device_release(), in the
null_add_dev() error path of null_create_dev(), and in null_destroy_dev().
Remove the redundant call.
And take &lock around zone_cond_store() in the two store wrappers to
serialize dev->zones check-and-deref against its alloc/free, which already
run under &lock. The reason there was no problem before is that only
nullb_device_release() or null_exit() frees the dev->zones, which
guarantees that subsequent users won't access the configfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free global tag_set on init error path
If shared_tags is enabled, null_setup_tagset() allocates the global tag_set
via null_init_global_tag_set(). If device creation later fails, err_dev
destroys the default devices and calls unregister_blkdev(), but never frees
the global tag_set. Since module init failed, null_exit() is never invoked,
so the global tag_set's tags and maps are permanently leaked.
Free the global tag_set in err_dev, matching null_exit() which does
if (tag_set.ops) blk_mq_free_tag_set(&tag_set). |
