| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.
And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared
peer map event log:
[ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166
peer unmap event log:
[ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166
use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041] drv_sta_state+0x115/0x677 [mac80211]
[21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161] genl_rcv_msg+0x38e/0x3be
[21713.800166] netlink_rcv_skb+0x89/0xf7
[21713.800171] genl_rcv+0x28/0x36
[21713.800176] netlink_unicast+0x179/0x24b
[21713.800181] netlink_sendmsg+0x3a0/0x40e
[21713.800187] sock_sendmsg+0x72/0x76
[21713.800192] ____sys_sendmsg+0x16d/0x1e3
[21713.800196] ___sys_sendmsg+0x95/0xd1
[21713.800200] __sys_sendmsg+0x85/0xbf
[21713.800205] do_syscall_64+0x43/0x55
[21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d
---truncated--- |
| Link Following Local Privilege Escalation Vulnerability in NortonUtilitiesSvc in Norton Utilities Ultimate Version 24.2.16862.6344 on Windows 10 Pro x64 allows local attackers to escalate privileges and execute arbitrary code in the context of SYSTEM via the creation of a symbolic link and leveraging a TOCTTOU (time-of-check to time-of-use) attack. |
| Wondershare UBackit 2.0.5 contains an unquoted service path vulnerability that allows local users to potentially execute arbitrary code with elevated system privileges. Attackers can exploit the unquoted path in the wsbackup service to inject malicious executables that would run with LocalSystem permissions during service startup. |
| WiFi File Transfer 1.0.8 contains a persistent cross-site scripting vulnerability that allows remote attackers to inject malicious script codes through file and folder names. Attackers can exploit the web server's input validation weakness to execute arbitrary JavaScript when users preview infected file paths, potentially compromising user browser sessions. |
| A vulnerability has been identified in which an RKE1 cluster keeps
constantly reconciling when secrets encryption configuration is enabled.
When reconciling, the Kube API secret values are written in plaintext
on the AppliedSpec. Cluster owners, Cluster members, and Project members
(for projects within the cluster), all have RBAC permissions to view
the cluster object from the apiserver. |
| Knap Advanced PHP Login 3.1.3 contains a persistent cross-site scripting vulnerability that allows remote attackers to inject malicious script code in the name parameter. Attackers can exploit the vulnerability to execute arbitrary scripts in users and activity log backend modules, potentially leading to session hijacking and persistent phishing attacks. |
| Windows permissions for ASPECT configuration toolsets are not fully secured allow-ing exposure of configuration informationThis issue affects ASPECT-Enterprise: through 3.*; NEXUS Series: through 3.*; MATRIX Series: through 3.*. |
| Banco Guayaquil 8.0.0 mobile iOS application contains a persistent cross-site scripting vulnerability in the TextBox Name Profile input. Attackers can inject malicious script code through a POST request that executes on application review without user interaction. |
| A local attacker could cause a full device reset by resetting the device passwords using an invalid reset file via USB. |
| An unauthenticated remote attacker could potentially disrupt operations by switching between multiple configuration presets via HTTP. |
| The WP Travel Engine – Elementor Widgets | Create Travel Booking Website Using WordPress and Elementor plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.3.7 via several widgets. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The SEMA API plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘catid’ parameter in all versions up to, and including, 5.27 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| Large content vulnerabilities are present in ASPECT exposing a device to disk overutilization on a system if administrator credentials become compromisedThis issue affects ASPECT-Enterprise: through 3.*; NEXUS Series: through 3.*; MATRIX Series: through 3.*. |
| The NPort 6100-G2/6200-G2 Series is affected by a high-severity vulnerability (CVE-2025-2026) that allows remote attackers to execute a null byte injection through the device’s web API. This may lead to an unexpected device reboot and result in a denial-of-service (DoS) condition.
An authenticated remote attacker with web read-only privileges can exploit the vulnerable API to inject malicious input. Successful exploitation may cause the device to reboot, disrupting normal operations and causing a temporary denial of service. |
| A vulnerability was found in cyanomiko dcnnt-py up to 0.9.0. It has been classified as critical. Affected is the function main of the file dcnnt/plugins/notifications.py of the component Notification Handler. The manipulation leads to command injection. It is possible to launch the attack remotely. Upgrading to version 0.9.1 is able to address this issue. The patch is identified as b4021d784a97e25151a5353aa763a741e9a148f5. It is recommended to upgrade the affected component. VDB-262230 is the identifier assigned to this vulnerability. |
| A vulnerability, which was classified as problematic, has been found in xuliangzhan vxe-table up to 3.7.9. This issue affects the function export of the file packages/textarea/src/textarea.js of the component vxe-textarea. The manipulation of the argument inputValue leads to cross site scripting. The attack may be initiated remotely. Upgrading to version 3.7.10 is able to address this issue. The patch is named d70b0e089740b65a22c89c106ebc4627ac48a22d. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-266123. |
| A flaw was found in Ansible. The ansible-core `user` module can allow an unprivileged user to silently create or replace the contents of any file on any system path and take ownership of it when a privileged user executes the `user` module against the unprivileged user's home directory. If the unprivileged user has traversal permissions on the directory containing the exploited target file, they retain full control over the contents of the file as its owner. |
| A script injection vulnerability was found in the Debezium database connector, where it does not properly sanitize some parameters. This flaw allows an attacker to send a malicious request to inject a parameter that may allow the viewing of unauthorized data. |
| The Short URL plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 1.6.8. This is due to missing or incorrect nonce validation on the configuration_page function. This makes it possible for unauthenticated attackers to add and import redirects, including comments containing cross-site scripting as detailed in CVE-2023-1602, granted they can trick a site administrator into performing an action such as clicking on a link. |
| A flaw was found in Undertow package. Using the FormAuthenticationMechanism, a malicious user could trigger a Denial of Service by sending crafted requests, leading the server to an OutofMemory error, exhausting the server's memory. |
