| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A vulnerability exists in the version ION-DTN BPv7 implementation version 4.1.3 when receiving a bundle with an improper reference to the imc scheme with valid Service-Specific Part (SSP) in their Previous Node Block. The vulnerability can cause ION to become unresponsive. This vulnerability is fixed in 4.1.3s. |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A segmentation fault occurs with ION-DTN BPv7 software version 4.1.3 when a bundle with a Destination Endpoint ID (EID) set to dtn:none is received. This causes the node to become unresponsive to incoming bundles, leading to a Denial of Service (DoS) condition. This vulnerability is fixed in 4.1.3s. |
| GeoGebra Classic 5.0.631.0-d contains a denial of service vulnerability in the input field that allows attackers to crash the application by sending oversized buffer content. Attackers can generate a large buffer of 800,000 repeated characters and paste it into the 'Entrada:' input field to trigger an application crash. |
| Use of Hard-coded Credentials vulnerability in ABB FLXEON.This issue affects FLXEON: through 9.3.5 and newer versions |
| GeoGebra Graphing Calculator 6.0.631.0 contains a denial of service vulnerability that allows attackers to crash the application by inputting an oversized buffer. Attackers can generate a payload of 8000 repeated characters to overwhelm the input field and cause the application to become unresponsive. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a bundle provides a invalid signature for a checkpoint. This bug impacts clients using any variation of KeylessVerifier.verify(). Currently checkpoints are only used to ensure the root hash of an inclusion proof was provided by the log in question. Failing to validate that means a bundle may provide an inclusion proof that doesn't actually correspond to the log in question. This may eventually lead a monitor/witness being unable to detect when a compromised logs are providing different views of themselves to different clients. There are other mechanisms right now that mitigate this, such as the signed entry timestamp. Sigstore-java currently requires a valid signed entry timestamp. By correctly verifying the signed entry timestamp we can make certain assertions about the log signing the log entry (like the log was aware of the artifact signing event and signed it). Therefore the impact on clients that are not monitors/witnesses is very low. This vulnerability is fixed in 1.2.0. |
| eBeam Education Suite 2.5.0.9 contains an unquoted service path vulnerability in the eBeam Device Service that allows local users to potentially execute code with elevated privileges. Attackers can exploit the unquoted path in the service configuration to inject malicious code that would execute with LocalSystem privileges during service startup. |
| FreeLAN 2.2 contains an unquoted service path vulnerability in its Windows service configuration that allows local attackers to execute arbitrary code. Attackers can exploit the unquoted binary path to inject malicious executables that will be launched with elevated LocalSystem privileges during service startup. |
| A vulnerability has been identified in SINAMICS S200 (All versions with serial number beginning with SZVS8, SZVS9, SZVS0 or SZVSN and the FS number is 02). The affected device contains an unlocked bootloader. This security oversight enables attackers to inject malicious code, or install untrusted firmware. The intrinsic security features designed to protect against data manipulation and unauthorized access are compromised when the bootloader is not secured. |
| CWE-400: Uncontrolled Resource Consumption vulnerability exists that could cause a denial of service when an authenticated user sends a specially crafted request to a specific endpoint from within the BMS network. |
| Short Description is a MediaWiki extension that provides local short description support. In version 4.0.0, short descriptions are not properly sanitized before being inserted as HTML using mw.util.addSubtitle, allowing any user to insert arbitrary HTML into the DOM by editing a page. This issue has been patched in version 4.0.1. |
| Cross-Site Request Forgery (CSRF) vulnerability in loopus WP Attractive Donations System - Easy Stripe & Paypal donations WP_AttractiveDonationsSystem allows Cross Site Request Forgery.This issue affects WP Attractive Donations System - Easy Stripe & Paypal donations: from n/a through <= 1.25. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix debug checking for np-guests using huge mappings
When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then
the debug checking in assert_host_shared_guest() fails on the launch of an
np-guest. This WARN_ON() causes a panic and generates the stack below.
In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping
is a single page but it may be a block map. Update the checking so that
the size is not checked and just assumes the correct size.
While we're here make the same fix in __pkvm_host_mkyoung_guest().
Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128
Info: Removed ghost socket file "/.lkvm//guest-128.sock".
[ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088!
[ 1406.521804] kvm [141]: nVHE call trace:
[ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8
[ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c
[ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104
[ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c
[ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8
[ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
[ 1406.522454] kvm [141]: ---[ end nVHE call trace ]---
[ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000
[ 1406.522554] Kernel panic - not syncing: HYP panic:
[ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.522554] VCPU:0000000000000000
[ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT
[ 1406.523485] Hardware name: FVP Base RevC (DT)
[ 1406.523566] Call trace:
[ 1406.523629] show_stack+0x18/0x24 (C)
[ 1406.523753] dump_stack_lvl+0xd4/0x108
[ 1406.523899] dump_stack+0x18/0x24
[ 1406.524040] panic+0x3d8/0x448
[ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c
[ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c
[ 1406.524500] handle_exit+0x60/0x17c
[ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0
[ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc
[ 1406.524919] __arm64_sys_ioctl+0xac/0x104
[ 1406.525067] invoke_syscall+0x48/0x10c
[ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0
[ 1406.525322] do_el0_svc+0x1c/0x28
[ 1406.525441] el0_svc+0x38/0x120
[ 1406.525588] el0t_64_sync_handler+0x10c/0x138
[ 1406.525750] el0t_64_sync+0x1ac/0x1b0
[ 1406.525876] SMP: stopping secondary CPUs
[ 1406.525965] Kernel Offset: disabled
[ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f
[ 1406.526130] Memory Limit: none
[ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic:
[ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.959099] VCPU:0000000000000000 ] |
| The Charitable – Donation Plugin for WordPress – Fundraising with Recurring Donations & More plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg & remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 1.8.3. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Appsero Helper plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.3.2. This is due to missing or incorrect nonce validation on the 'appsero_helper' page. This makes it possible for unauthenticated attackers to update settings and inject malicious web scripts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. The wincred credential helper uses a static buffer (target) as a unique key for storing and comparing against internal storage. This credential helper does not properly bounds check the available space remaining in the buffer before appending to it with wcsncat(), leading to potential buffer overflows. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1. |
| The ProductDyno plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘res’ parameter in all versions up to, and including, 1.0.24 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts into pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This vulnerability is potentially a duplicate of CVE-2025-22320. |
| NodeBB Plugin Emoji 3.2.1 contains an arbitrary file write vulnerability that allows administrative users to write files to arbitrary system locations through the emoji upload API. Attackers with admin access can craft file upload requests with directory traversal to overwrite system files by manipulating the file path parameter. |
| Deserialization of Untrusted Data vulnerability in Roland Barker, xnau webdesign Participants Database allows Object Injection.This issue affects Participants Database: from n/a through 2.5.9.2. |
